i buy new ufi box isp adapter v2 no work i try diffrent mobile no detect isp adapter any mobile plz help me ufi team[Answered]

Status
Not open for further replies.

mirrzaaa

Active Member
Jun 2, 2019
19
2
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4169
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---






i use this method but no any mobile detect
https://www.google.com/url?sa=i&sou...aw2gSM1bMC8w07RPz3c6fW9E&ust=1559628078346620
 
Last edited by a moderator:

abe05

Friend's Martview
Apr 1, 2019
142
47
just restart your pc make sure only ufi run, ones it detect just do operation completely because if you re connect phone it may not work again.

need patient when it comes on detecting isp
 

mirrzaaa

Active Member
Jun 2, 2019
19
2
just restart your pc make sure only ufi run, ones it detect just do operation completely because if you re connect phone it may not work again.

need patient when it comes on detecting isp




i restart pc only run ufi emmc tool but same condition this plz help me

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4169
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
 

mirrzaaa

Active Member
Jun 2, 2019
19
2
i restart pc only run ufi emmc tool but same condition this plz help me

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4169
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---


sir this is isp adapter or other issu i buy new ufi box no work isp adapter plz this problem help me

i use first my freind ufi box detect all isp pinout mobile perfect work
 

waqas_ali6012003

Friend's Martview
Nov 17, 2018
159
103
Sonork ID
100.1675677
sir this is isp adapter or other issu i buy new ufi box no work isp adapter plz this problem help me

i use first my freind ufi box detect all isp pinout mobile perfect work
Sir can u barow his ISP adapter and check wirh his adapter . .
To make sure ur box dosnot have any problem


Sent From SM-N950F Using Martview Forum App
 

mirrzaaa

Active Member
Jun 2, 2019
19
2
try another good phone to test

sir i use test g532f madusa pro ok connect but i buy ufi new box isp adapter v2 no work show this error all ok mobiles

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4169
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... CMD, DAT0 not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
 

mirrzaaa

Active Member
Jun 2, 2019
19
2
Sir can u barow his ISP adapter and check wirh his adapter . .
To make sure ur box dosnot have any problem

i no understand
 

Deepesh Sharma

Friend's Martview
Apr 4, 2017
1,712
3,144
India
Sonork ID
100.1614172
Try To Connect An Working Emmc Card On Your Adaptor Follow Below Image May BE its An Help For identifying Your Problem.
 
  • Like
Reactions: abo anas zayan

waqas_ali6012003

Friend's Martview
Nov 17, 2018
159
103
Sonork ID
100.1675677
Those pinouts are for ISP bro .
Conect wire direct to v2 ...

Sent From SM-N950F Using Martview Forum App
 

Deepesh Sharma

Friend's Martview
Apr 4, 2017
1,712
3,144
India
Sonork ID
100.1614172
YES ITS FOR ISP CONNECTION WORKING ON BOTH-VER.1/2
ITS FOR CHECKING BOX PROBLEM OR ADAPTOR PROBLEM.
 

mirrzaaa

Active Member
Jun 2, 2019
19
2
Try To Connect An Working Emmc Card On Your Adaptor Follow Below Image May BE its An Help For identifying Your Problem.
i try this methad isp adapter but this problem
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4169
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---
Check your connection, make sure eMMC inserted properly.

plz help me ufi box team
 

waqas_ali6012003

Friend's Martview
Nov 17, 2018
159
103
Sonork ID
100.1675677
Bhai inbox ms ur team id pass now let me check for u

Sent From SM-N950F Using Martview Forum App
 

mirrzaaa

Active Member
Jun 2, 2019
19
2
YES ITS FOR ISP CONNECTION WORKING ON BOTH-VER.1/2
ITS FOR CHECKING BOX PROBLEM OR ADAPTOR PROBLEM.

[/QUOTE


Try To Connect An Working Emmc Card On Your Adaptor Follow Below Image May BE its An Help For identifying Your Problem.

Click to expand...
sir no problem solve this condition this procidure
i try this method isp adapter but this problem
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4169
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---
Check your connection, make sure eMMC inserted properly.

plz help me ufi box team
 

mirrzaaa

Active Member
Jun 2, 2019
19
2
sir i use mmc card ok conection but this error

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4169
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
--- Try to use 1 bit connection ---
Check your connection, make sure eMMC inserted properly.

sir this problem box or adapter
 
Status
Not open for further replies.
Top