Oppo A3S dead after factory reset by isp plz can any expert help

Xsa-Scorpion

Junior Member
Nov 25, 2016
3
0
Morocco
allready writing full flash raw programe its take long time but after that no luck still dead i dont know where can find the problem its about factory reset or same short whene solder pin i cant understand where is the problem efect this option (factory reset ) still work or not to pass live phone at dead phone its confus

this is same trying to revive i m still waiting same suggestion to doing
and phone cant detect mode QLM (EDL)

log for write full flash latest VERSION (CPH1803EX_11_A.12)
Code:
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1802
 Boot version: 1.04, FW version: 1.12 (Jun  7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x15 (Samsung)
 Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xD89BD472
 Manufacturing date: juil. 2018
CID: 15010051 4536334D 4203D89B D47275F0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
 No boot acknowledge is sent (default)
 User area is enabled for boot
Partitioning support: 0x07
 Device support partitioning feature
 Device can have enhanced technological features
 Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
 Power-on write protection: possible
 Permanent write protection: possible
 Lock status: not locked
ANDROID System Info:
 platform: msm8953, cpu abi: arm64-v8a
 manufacturer: OPPO
 board: msm8953, name: CPH1803
 brand: OPPO, model: CPH1803(OPPO A3s)
 build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1803EX_11_A.12)
 build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20180927.160930 release-keys
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb   (BGA221)
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1802
 Boot version: 1.04, FW version: 1.12 (Jun  7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x15 (Samsung)
 Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xD89BD472
 Manufacturing date: juil. 2018
CID: 15010051 4536334D 4203D89B D47275F0
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 14.56 GiB(15,634,268,160 bytes)
Processing file: "gpt_backup0.bin"... Skipped
Processing file: "gpt_main0.bin"...   Applying patch: Update last partition 65 'userdata' with actual size in Primary Header....Done.
  Applying patch: Update Primary Header with LastUseableLBA....Done.
  Applying patch: Update Primary Header with BackupGPT Header Location....Done.
  Applying patch: Update Primary Header with CRC of Partition Array....Done.
  Applying patch: Zero Out Header CRC in Primary Header....Done.
  Applying patch: Update Primary Header with CRC of Primary Header....Done.
 Writing PrimaryGPT at 0x00000000 (34 sectors)... Done in 0.902 s
Processing file: "persist.img"...  Writing sparse image persist at 0x01705000 (65536 sectors)... Done in 11.811 s
Processing file: "emmc_fw.bin"...  Writing opporeserve1 at 0x03705000 (8192 sectors)... Done in 8.669 s
Processing file: "marketname.xml"...  Writing marketname at 0x03B24800 (1 sectors)... Done in 0.055 s
Processing file: "opporeserve2.img"...  Writing sparse image opporeserve2 at 0x03F05000 (131072 sectors)... Done in 12.062 s
Processing file: "sbl1.mbn"...  Writing sbl1 at 0x08308000 (853 sectors)... Done in 0.902 s
Processing file: "rpm.mbn"...  Writing rpm at 0x08388000 (342 sectors)... Done in 0.362 s
Processing file: "tz.mbn"...  Writing tz at 0x08408000 (3048 sectors)... Done in 3.222 s
Processing file: "devcfg.mbn"...  Writing devcfg at 0x08608000 (78 sectors)... Done in 0.083 s
Processing file: "sbl1.mbn"...  Writing sbl1bak at 0x08648000 (853 sectors)... Done in 0.902 s
Processing file: "rpm.mbn"...  Writing rpmbak at 0x086C8000 (342 sectors)... Done in 0.361 s
Processing file: "tz.mbn"...  Writing tzbak at 0x08748000 (3048 sectors)... Done in 3.505 s
Processing file: "devcfg.mbn"...  Writing devcfgbak at 0x08948000 (78 sectors)... Done in 0.083 s
Processing file: "adspso.bin"...  Writing dsp at 0x08988000 (32768 sectors)... Done in 34.947 s
Processing file: "sec_smt.dat"...  Writing sec at 0x0A188000 (1 sectors)... Done in 0.083 s
Processing file: "emmc_appsboot.mbn"...  Writing aboot at 0x0A18C000 (1417 sectors)... Done in 1.589 s
Processing file: "emmc_appsboot.mbn"...  Writing abootbak at 0x0A28C000 (1417 sectors)... Done in 1.697 s
Processing file: "NON-HLOS.bin"...  Writing modem at 0x0A38C000 (262144 sectors)... Done in 4 mins 38.461 s
Processing file: "dtbo.img"...  Writing dtbo at 0x1238C000 (16384 sectors)... Done in 17.318 s
Processing file: "vbmeta.img"...  Writing vbmeta at 0x12B8C000 (8 sectors)... Done in 0.010 s
Processing file: "boot.img"...  Writing boot at 0x12B9C000 (131072 sectors)... Done in 2 mins 19.314 s
Processing file: "recovery.img"...  Writing recovery at 0x16B9C000 (131072 sectors)... Done in 2 mins 20.024 s
Processing file: "logo.bin"...  Writing LOGO at 0x1BB00000 (1538 sectors)... Done in 1.773 s
Processing file: "DRIVER.ISO"...  Writing DRIVER at 0x1DB00000 (46476 sectors)... Done in 49.301 s
Processing file: "cache.img"...  Writing sparse image cache at 0x1FB00000 (524288 sectors)... Done in 14.314 s
Processing file: "mdtp.img"...  Writing mdtp at 0x30980000 (34782 sectors)... Done in 36.919 s
Processing file: "lksecapp.mbn"...  Writing lksecapp at 0x33000000 (113 sectors)... Done in 0.119 s
Processing file: "cmnlib_30.mbn"...  Writing cmnlib at 0x33020000 (418 sectors)... Done in 0.447 s
Processing file: "cmnlib64_30.mbn"...  Writing cmnlib64 at 0x33120000 (526 sectors)... Done in 0.689 s
Processing file: "keymaster64.mbn"...  Writing keymaster at 0x33220000 (531 sectors)... Done in 0.688 s
Processing file: "lksecapp.mbn"...  Writing lksecappbak at 0x33320000 (113 sectors)... Done in 0.119 s
Processing file: "cmnlib_30.mbn"...  Writing cmnlibbak at 0x33340000 (418 sectors)... Done in 0.554 s
Processing file: "cmnlib64_30.mbn"...  Writing cmnlib64bak at 0x33440000 (526 sectors)... Done in 0.688 s
Processing file: "keymaster64.mbn"...  Writing keymasterbak at 0x33540000 (531 sectors)... Done in 0.688 s
Processing file: "dpAP.mbn"...  Writing apdp at 0x33800000 (26 sectors)... Done in 0.148 s
Processing file: "system.img"...  Writing sparse image system at 0x3F000000 (7030784 sectors)... Done in 1 hour 52 mins 1.626 s
Processing file: "vendor.img"...  Writing sparse image vendor at 0x115900000 (2161408 sectors)... Done in 31 mins 44.400 s
Processing file: "userdata.img"...  Writing sparse image userdata at 0x158000000 (15728640 sectors)... Done in 1 hour 42 mins 45.211 s
Writing boot partition config to 0x38... Done.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 

shamsul haq

Junior Member
Jul 12, 2018
3
0
mumbai
i think after flash by raw programme whene finished, set Auto config boot to 0x38, see last line in log bro ...

my handset also dead but i hard work set on but hang on logo

here is procces
1-- connect phone emmc and info
2--formate emmc
3-- write extracsd file backup
4--write rawprobram0 only one area any one like first file
5--info
6-- disconnect
7--flash msm downlode tools
 

Lainlain

Junior Member
Jan 16, 2019
2
1
check clk connection in 0ohm resistor. if this is damage, direct conncet with jumper wire. ok
 

Attachments

Reactions: MDxavi