Post Here Sucessfully Unlocked/Repair Phones With Umt Tool
- Thread starter Abdullah
- Start date
Vivo y55 1603 Flashing With Umt
Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_002]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
[PROTECTIVE_FLASH] Skipping [modemst.mbn] -> [modemst1]
[PROTECTIVE_FLASH] Skipping [modemst.mbn] -> [modemst2]
Writing [PD1613F_EX_fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [system_12.img] -> [system] ...Done
Writing [system_13.img] -> [system] ...Done
Writing [system_14.img] -> [system] ...Done
Writing [system_15.img] -> [system] ...Done
Writing [system_16.img] -> [system] ...Done
Writing [system_17.img] -> [system] ...Done
Writing [system_18.img] -> [system] ...Done
Writing [system_19.img] -> [system] ...Done
Writing [system_20.img] -> [system] ...Done
Writing [system_21.img] -> [system] ...Done
Writing [system_22.img] -> [system] ...Done
Writing [system_23.img] -> [system] ...Done
Writing [system_24.img] -> [system] ...Done
Writing [system_25.img] -> [system] ...Done
Writing [system_26.img] -> [system] ...Done
Writing [system_27.img] -> [system] ...Done
Writing [system_28.img] -> [system] ...Done
Writing [system_29.img] -> [system] ...Done
Writing [system_30.img] -> [system] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [oem_1.img] -> [oem] ...Done
Writing [oem_2.img] -> [oem] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [survival.img] -> [survival] ...Done
Writing [dp_AP_signed.mbn] -> [apdp] ...Done
Writing [dp_MSA_signed.mbn] -> [msadp] ...Done
Writing [apps_1.img] -> [apps] ...Done
Writing [apps_2.img] -> [apps] ...Done
Writing [apps_3.img] -> [apps] ...Done
Writing [apps_4.img] -> [apps] ...Done
Writing [apps_5.img] -> [apps] ...Done
Writing [apps_6.img] -> [apps] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [userdata_13.img] -> [userdata] ...Done
Writing [userdata_14.img] -> [userdata] ...Done
Writing [userdata_15.img] -> [userdata] ...Done
Writing [userdata_16.img] -> [userdata] ...Done
Writing [userdata_17.img] -> [userdata] ...Done
Writing [userdata_18.img] -> [userdata] ...Done
Writing [userdata_19.img] -> [userdata] ...Done
Writing [userdata_20.img] -> [userdata] ...Done
Writing [userdata_21.img] -> [userdata] ...Done
Writing [userdata_22.img] -> [userdata] ...Done
Writing [userdata_23.img] -> [userdata] ...Done
Writing [userdata_24.img] -> [userdata] ...Done
Writing [userdata_25.img] -> [userdata] ...Done
Writing [userdata_26.img] -> [userdata] ...Done
Writing [userdata_27.img] -> [userdata] ...Done
Writing [userdata_28.img] -> [userdata] ...Done
Writing [userdata_29.img] -> [userdata] ...Done
Writing [userdata_30.img] -> [userdata] ...Done
Writing [userdata_31.img] -> [userdata] ...Done
Writing [userdata_32.img] -> [userdata] ...Done
Writing [userdata_33.img] -> [userdata] ...Done
Writing [userdata_34.img] -> [userdata] ...Done
Writing [userdata_35.img] -> [userdata] ...Done
Writing [userdata_36.img] -> [userdata] ...Done
Writing [userdata_37.img] -> [userdata] ...Done
Writing [userdata_38.img] -> [userdata] ...Done
Writing [userdata_39.img] -> [userdata] ...Done
Writing [userdata_40.img] -> [userdata] ...Done
Writing [userdata_41.img] -> [userdata] ...Done
Writing [userdata_42.img] -> [userdata] ...Done
Writing [userdata_43.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 3.4
Operation : Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM26)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_002]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
Writing [adspso.bin] -> [dsp] ...Done
[PROTECTIVE_FLASH] Skipping [modemst.mbn] -> [modemst1]
[PROTECTIVE_FLASH] Skipping [modemst.mbn] -> [modemst2]
Writing [PD1613F_EX_fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [system_12.img] -> [system] ...Done
Writing [system_13.img] -> [system] ...Done
Writing [system_14.img] -> [system] ...Done
Writing [system_15.img] -> [system] ...Done
Writing [system_16.img] -> [system] ...Done
Writing [system_17.img] -> [system] ...Done
Writing [system_18.img] -> [system] ...Done
Writing [system_19.img] -> [system] ...Done
Writing [system_20.img] -> [system] ...Done
Writing [system_21.img] -> [system] ...Done
Writing [system_22.img] -> [system] ...Done
Writing [system_23.img] -> [system] ...Done
Writing [system_24.img] -> [system] ...Done
Writing [system_25.img] -> [system] ...Done
Writing [system_26.img] -> [system] ...Done
Writing [system_27.img] -> [system] ...Done
Writing [system_28.img] -> [system] ...Done
Writing [system_29.img] -> [system] ...Done
Writing [system_30.img] -> [system] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [oem_1.img] -> [oem] ...Done
Writing [oem_2.img] -> [oem] ...Done
Writing [mdtp.img] -> [mdtp] ...Done
Writing [cmnlib.mbn] -> [cmnlib] ...Done
Writing [cmnlib.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64bak] ...Done
Writing [keymaster.mbn] -> [keymaster] ...Done
Writing [keymaster.mbn] -> [keymasterbak] ...Done
Writing [survival.img] -> [survival] ...Done
Writing [dp_AP_signed.mbn] -> [apdp] ...Done
Writing [dp_MSA_signed.mbn] -> [msadp] ...Done
Writing [apps_1.img] -> [apps] ...Done
Writing [apps_2.img] -> [apps] ...Done
Writing [apps_3.img] -> [apps] ...Done
Writing [apps_4.img] -> [apps] ...Done
Writing [apps_5.img] -> [apps] ...Done
Writing [apps_6.img] -> [apps] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [userdata_13.img] -> [userdata] ...Done
Writing [userdata_14.img] -> [userdata] ...Done
Writing [userdata_15.img] -> [userdata] ...Done
Writing [userdata_16.img] -> [userdata] ...Done
Writing [userdata_17.img] -> [userdata] ...Done
Writing [userdata_18.img] -> [userdata] ...Done
Writing [userdata_19.img] -> [userdata] ...Done
Writing [userdata_20.img] -> [userdata] ...Done
Writing [userdata_21.img] -> [userdata] ...Done
Writing [userdata_22.img] -> [userdata] ...Done
Writing [userdata_23.img] -> [userdata] ...Done
Writing [userdata_24.img] -> [userdata] ...Done
Writing [userdata_25.img] -> [userdata] ...Done
Writing [userdata_26.img] -> [userdata] ...Done
Writing [userdata_27.img] -> [userdata] ...Done
Writing [userdata_28.img] -> [userdata] ...Done
Writing [userdata_29.img] -> [userdata] ...Done
Writing [userdata_30.img] -> [userdata] ...Done
Writing [userdata_31.img] -> [userdata] ...Done
Writing [userdata_32.img] -> [userdata] ...Done
Writing [userdata_33.img] -> [userdata] ...Done
Writing [userdata_34.img] -> [userdata] ...Done
Writing [userdata_35.img] -> [userdata] ...Done
Writing [userdata_36.img] -> [userdata] ...Done
Writing [userdata_37.img] -> [userdata] ...Done
Writing [userdata_38.img] -> [userdata] ...Done
Writing [userdata_39.img] -> [userdata] ...Done
Writing [userdata_40.img] -> [userdata] ...Done
Writing [userdata_41.img] -> [userdata] ...Done
Writing [userdata_42.img] -> [userdata] ...Done
Writing [userdata_43.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
QcFire Ver. 3.4
Chinese Unkown Modal Hang O Logo SOlved By Format
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1610 [msm8937]
Software : MMB29M release-keys, eng.compiler.20180716.180224 [Mon Jul 16 18:07:16 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-07-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1610 [msm8937]
Software : MMB29M release-keys, eng.compiler.20180716.180224 [Mon Jul 16 18:07:16 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-07-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Redmi 4a Restart Continues Solve With Umt
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4A [msm8937]
Software : MMB29M, V8.1.2.0.MCCCNDI [Fri Nov 25 22:28:11 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-11-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4A [msm8937]
Software : MMB29M, V8.1.2.0.MCCCNDI [Fri Nov 25 22:28:11 CST 2016]
Android Ver. : 6.0.1
Patch Level : 2016-11-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Mi Note 4 Hang On Logo Solved With SIngle Click Umt
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : MMB29M, V8.1.10.0.MCFMIDI [Wed Dec 28 10:35:32 WIB 2016]
Android Ver. : 6.0.1
Patch Level : 2016-12-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : MMB29M, V8.1.10.0.MCFMIDI [Wed Dec 28 10:35:32 WIB 2016]
Android Ver. : 6.0.1
Patch Level : 2016-12-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Redmi 4a hard Reset In Adb Slidemode
Searching for phone in sideload mode...Found
Device Id : rolex_global
Version : V8.2.9.0.MCCMIDL
Code Base : 6.0.1
Ext Info : GB, en, F
Formatting Data...Done
Rebooting device...Done
Operation Finished.
QcFire Ver. 3.4
Searching for phone in sideload mode...Found
Device Id : rolex_global
Version : V8.2.9.0.MCCMIDL
Code Base : 6.0.1
Ext Info : GB, en, F
Formatting Data...Done
Rebooting device...Done
Operation Finished.
QcFire Ver. 3.4
Operation : Fix 9008 Port
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LYF LS-4505 [msm8909]
Software : LS-4505-S22A_LYF_L12EN_202_161008, 0f19b52 [Fri Nov 17 13:10:01 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-10-05
Applying Patches................Done
Operation Finished.
QcFire Ver. 3.4
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LYF LS-4505 [msm8909]
Software : LS-4505-S22A_LYF_L12EN_202_161008, 0f19b52 [Fri Nov 17 13:10:01 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-10-05
Applying Patches................Done
Operation Finished.
QcFire Ver. 3.4
Mi NOte 5 Read info WIth Umt
Operation : Read Information
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937]
Software : N2G47H, V8.5.5.0.NDFMIED [Wed Sep 27 21:52:15 WIB 2017]
Android Ver. : 7.1.2
Patch Level : 2017-09-01
Operation Finished.
QcFire Ver. 3.4
Operation : Read Information
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 5A [msm8937]
Software : N2G47H, V8.5.5.0.NDFMIED [Wed Sep 27 21:52:15 WIB 2017]
Android Ver. : 7.1.2
Patch Level : 2017-09-01
Operation Finished.
QcFire Ver. 3.4
A37 F Blue Display Solved By format
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_171209, 1480422943 [Sat Dec 9 16:58:03 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-12-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_171209, 1480422943 [Sat Dec 9 16:58:03 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-12-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Oppo A 71 Format With Umt Qc Fire
Device : Oppo A71 (CPH1801)
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 3.4
Device : Oppo A71 (CPH1801)
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 557BAC65705B8A8303276B9FBB8FD533DBB33EA9E55BF80B47647B8549C170B9
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_015]...Done
Executing Loader...OK
Formatting Userdata...Done
Disconnect phone and hold Power Button to reset.
Operation Finished.
QcFire Ver. 3.4
Vivo 1628 F Format With Umt
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo PD1628F_EX [msm8937]
Software : MMB29M release-keys, eng.compiler.20181008.154817 [Mon Oct 8 15:54:58 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-08-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.4
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo PD1628F_EX [msm8937]
Software : MMB29M release-keys, eng.compiler.20181008.154817 [Mon Oct 8 15:54:58 CST 2018]
Android Ver. : 6.0.1
Patch Level : 2018-08-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.4
j 210f Touch nt working solved
Model : Samsung Universal
Operation : Flash
Searching for Phone...Found
Port: : COM10 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7870 [HiSpeed]
Sending Partition [BOOT]...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:10
Module Ver. 0.2
Model : Samsung Universal
Operation : Flash
Searching for Phone...Found
Port: : COM10 : SAMSUNG Mobile USB Modem #2
Checking for Device...Found [Download Mode]
Reading Data from Phone...Done
Chipset : LSI7870 [HiSpeed]
Sending Partition [BOOT]...Done
Closing Session...Done
Operation Finished.
Elapsed Time 00:10
Module Ver. 0.2
Vivo y51 L flashing With umt
Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM111)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1400900 [8909] 00000000
OPK_DATA : 40EC2E6F16D8D2FF04813324C69AAE78DABE3BDC649086A37100C9F00E237215
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8909_037.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 4 GB
LU Count : 1 [0x00748000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [usbmsc_1.img] -> [usbmsc] ...Done
Writing [usbmsc_2.img] -> [usbmsc] ...Done
Writing [usbmsc_3.img] -> [usbmsc] ...Done
Writing [usbmsc_4.img] -> [usbmsc] ...Done
Writing [usbmsc_5.img] -> [usbmsc] ...Done
Writing [usbmsc_6.img] -> [usbmsc] ...Done
Writing [usbmsc_7.img] -> [usbmsc] ...Done
Writing [usbmsc_8.img] -> [usbmsc] ...Done
Writing [usbmsc_9.img] -> [usbmsc] ...Done
Writing [usbmsc_10.img] -> [usbmsc] ...Done
Writing [usbmsc_11.img] -> [usbmsc] ...Done
Writing [usbmsc_12.img] -> [usbmsc] ...Done
Writing [usbmsc_13.img] -> [usbmsc] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM111)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1400900 [8909] 00000000
OPK_DATA : 40EC2E6F16D8D2FF04813324C69AAE78DABE3BDC649086A37100C9F00E237215
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8909_037.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 4 GB
LU Count : 1 [0x00748000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [usbmsc_1.img] -> [usbmsc] ...Done
Writing [usbmsc_2.img] -> [usbmsc] ...Done
Writing [usbmsc_3.img] -> [usbmsc] ...Done
Writing [usbmsc_4.img] -> [usbmsc] ...Done
Writing [usbmsc_5.img] -> [usbmsc] ...Done
Writing [usbmsc_6.img] -> [usbmsc] ...Done
Writing [usbmsc_7.img] -> [usbmsc] ...Done
Writing [usbmsc_8.img] -> [usbmsc] ...Done
Writing [usbmsc_9.img] -> [usbmsc] ...Done
Writing [usbmsc_10.img] -> [usbmsc] ...Done
Writing [usbmsc_11.img] -> [usbmsc] ...Done
Writing [usbmsc_12.img] -> [usbmsc] ...Done
Writing [usbmsc_13.img] -> [usbmsc] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Done
Operation Finished.
Lyf Phone Flashing With Qc Fire
Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM111)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1400900 [8909] 00000000
OPK_DATA : 40EC2E6F16D8D2FF04813324C69AAE78DABE3BDC649086A37100C9F00E237215
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8909_037.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 4 GB
LU Count : 1 [0x00748000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [usbmsc_1.img] -> [usbmsc] ...Done
Writing [usbmsc_2.img] -> [usbmsc] ...Done
Writing [usbmsc_3.img] -> [usbmsc] ...Done
Writing [usbmsc_4.img] -> [usbmsc] ...Done
Writing [usbmsc_5.img] -> [usbmsc] ...Done
Writing [usbmsc_6.img] -> [usbmsc] ...Done
Writing [usbmsc_7.img] -> [usbmsc] ...Done
Writing [usbmsc_8.img] -> [usbmsc] ...Done
Writing [usbmsc_9.img] -> [usbmsc] ...Done
Writing [usbmsc_10.img] -> [usbmsc] ...Done
Writing [usbmsc_11.img] -> [usbmsc] ...Done
Writing [usbmsc_12.img] -> [usbmsc] ...Done
Writing [usbmsc_13.img] -> [usbmsc] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Failed
Remove cable, reconnect battery / hold Power Button ~15 seconds.
Operation Finished.
Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM111)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1400900 [8909] 00000000
OPK_DATA : 40EC2E6F16D8D2FF04813324C69AAE78DABE3BDC649086A37100C9F00E237215
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8909_037.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 4 GB
LU Count : 1 [0x00748000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [NON-HLOS.bin] -> [modem] ...Done
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
Writing [splash.img] -> [splash] ...Done
Writing [fs_image.tar.gz.mbn.img] -> [fsg] ...Done
Writing [sec.dat] -> [sec] ...Done
Writing [system_1.img] -> [system] ...Done
Writing [system_2.img] -> [system] ...Done
Writing [system_3.img] -> [system] ...Done
Writing [system_4.img] -> [system] ...Done
Writing [system_5.img] -> [system] ...Done
Writing [system_6.img] -> [system] ...Done
Writing [system_7.img] -> [system] ...Done
Writing [system_8.img] -> [system] ...Done
Writing [system_9.img] -> [system] ...Done
Writing [system_10.img] -> [system] ...Done
Writing [system_11.img] -> [system] ...Done
Writing [persist_1.img] -> [persist] ...Done
Writing [usbmsc_1.img] -> [usbmsc] ...Done
Writing [usbmsc_2.img] -> [usbmsc] ...Done
Writing [usbmsc_3.img] -> [usbmsc] ...Done
Writing [usbmsc_4.img] -> [usbmsc] ...Done
Writing [usbmsc_5.img] -> [usbmsc] ...Done
Writing [usbmsc_6.img] -> [usbmsc] ...Done
Writing [usbmsc_7.img] -> [usbmsc] ...Done
Writing [usbmsc_8.img] -> [usbmsc] ...Done
Writing [usbmsc_9.img] -> [usbmsc] ...Done
Writing [usbmsc_10.img] -> [usbmsc] ...Done
Writing [usbmsc_11.img] -> [usbmsc] ...Done
Writing [usbmsc_12.img] -> [usbmsc] ...Done
Writing [usbmsc_13.img] -> [usbmsc] ...Done
Writing [cache_1.img] -> [cache] ...Done
Writing [cache_2.img] -> [cache] ...Done
Writing [cache_3.img] -> [cache] ...Done
Writing [boot.img] -> [boot] ...Done
Writing [recovery.img] -> [recovery] ...Done
Writing [userdata_1.img] -> [userdata] ...Done
Writing [userdata_2.img] -> [userdata] ...Done
Writing [userdata_3.img] -> [userdata] ...Done
Writing [userdata_4.img] -> [userdata] ...Done
Writing [userdata_5.img] -> [userdata] ...Done
Writing [userdata_6.img] -> [userdata] ...Done
Writing [userdata_7.img] -> [userdata] ...Done
Writing [userdata_8.img] -> [userdata] ...Done
Writing [userdata_9.img] -> [userdata] ...Done
Writing [userdata_10.img] -> [userdata] ...Done
Writing [userdata_11.img] -> [userdata] ...Done
Writing [userdata_12.img] -> [userdata] ...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Resetting device...Failed
Remove cable, reconnect battery / hold Power Button ~15 seconds.
Operation Finished.
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LYF LS-5016 [msm8909]
Software : LS-5016-S17B_LYF_L12EN_200_160824, 6f00456 [Wed Apr 12 19:49:38 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-01-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [2]
Preparing Loader...Done
Sending Loader [8909_012]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : LYF LS-5016 [msm8909]
Software : LS-5016-S17B_LYF_L12EN_200_160824, 6f00456 [Wed Apr 12 19:49:38 CST 2017]
Android Ver. : 6.0.1
Patch Level : 2017-01-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_171209, 1480422943 [Sat Dec 9 16:58:03 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-12-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8916_014]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : OPPO A37f [msm8916]
Software : A37fEX_11_171209, 1480422943 [Sat Dec 9 16:58:03 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-12-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5A [msm8937]
Software : N2G47H, V9.5.10.0.NCKMIFA [Thu May 24 21:25:16 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-05-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM35)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5A [msm8937]
Software : N2G47H, V9.5.10.0.NCKMIFA [Thu May 24 21:25:16 WIB 2018]
Android Ver. : 7.1.2
Patch Level : 2018-05-01
Preparing Data...Done
Formatting Userdata...Done
Operation Finished.
QcFire Ver. 3.4
Deepesh Sharma
Friend's Martview
- Mar 16, 2017
- 2,096
- 7,178
- Skype
- GSMKINGMAKER
- Sonork ID
- 9655528882
- PayPal:
-
Redmi Note 4 2016100 Mi Account Removed Done
Code:
Operation : Disable Mi Account
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM14)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20171113213139, V9.0.5.0.NCFMIEI [Mon Nov 13 21:31:37 WIB 2017]
Android Ver. : 7.0
Patch Level : 2017-11-05
Reading Data...
Preparing Data...Done
Trying to Disable Mi Account...Done
Operation Finished.
QcFire Ver. 3.8- Mar 16, 2017
- 2,096
- 7,178
- Skype
- GSMKINGMAKER
- Sonork ID
- 9655528882
- PayPal:
-
Redmi Note 4 2016100 Password & FRP Lock Removed Done
Code:
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM14)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi Note 4 [msm8953]
Software : AL1512-mido-build-20171113213139, V9.0.5.0.NCFMIEI [Mon Nov 13 21:31:37 WIB 2017]
Android Ver. : 7.0
Patch Level : 2017-11-05
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 3.8