SAMSUNG C701F dead AFTER FRP DONE...

ithehar

Member
Apr 26, 2019
5
0
SAMSUNG C701F dead AFTER FRP DONE...

NO PORT NOTHING DETECTS HELP ME SIR.....

I PURCHESED YESTERDAY UFI BOX I WANT BOOT REPAIR PLZ HELP WITH FILES AND IMAGES OR VIDEO LINK UFI TEAM......

THIS WAS MY FIREST REPAIR IN UFI SUPPORT ME.....

UFI TEAM
 

ASHOK

Blocked
Feb 27, 2017
21
75
INDIA
ufi setup install after go to suport area download your dump file

first decte with isp after show your firmware info
go to download pit file and bl file after write it ufi box after com download mode ? ok after flash .
no download mode ? first backup imei releted data backup after univarsel factroy format ,gpt patison ,after write dump
repair excsd
mainuser data {boot1}
boot 2
boot3
always depending your dump size


this method useful
 

venny

Active Member
Sep 14, 2017
69
45
india
It is C7 Pro C7010 Try if ur model is same Make a backup Carefully Before do Anything
11441
 

amitmaity

Member
Sep 17, 2019
5
0
samsung c701f/ds after programing only vibrate how to solve
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-6366
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RC14MB (0x524331344d42), rev: 0x0C, serial number: 0x2968AA10
Manufacturing date: Mar 2017
CID: 15010052 4331344D 420C2968 AA103426
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMRC10014M-B809/64GB+LPDDR3 32Gb (BGA221)
 

mintu

Junior Member
Dec 17, 2016
2
0
india
It is C7 Pro C7010 Try if ur model is same Make a backup Carefully Before do Anything
View attachment 11441
dear user i have also ac7 pro and i applied all wires like you but ufi giving clk error so please tell me which should i apply clk wire back on component or front and how much ohms gicing clk component please tell me
 
Top