♦ Firmware HUAWEI NOVA 5 Pro Clone (Welcome) MT6572 4.4.2 BY NCK ♦

[perata]

Peace, mercy and blessings of God

Peace and blessings be upon our master Muhammad

Firmware HUAWEI NOVA 5 Pro Clone (Welcome) MT6572 4.4.2 BY NCK

Phone pictures with attachments


• Info Read

 Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM34)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x4c3758484d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 1501004C3758484D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000    
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000      [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: KOT49H
Display ID: ALPS.KK1.MP7.Band1.2.5.V1.3-2019-11-19_11-19
Version: 4.4.2
Model: nowa5 Pro
Device: zl9e_ctx_nowa5_pro_emmc64_8_ddr1_b15_fl
Brand: welcome
Manufacturer: alps
Region: US
Mediatek Version Release: ALPS.KK1.MP7.Band1.2.5.V1.3
IMEI[1]: 350000000000000
IMEI[2]: 350000000000000
Dumping Preloader.
Partition: PRELOADER
Partition: MBR
Partition: EBR1
Partition: PRO_INFO
Partition: NVRAM
Partition: PROTECT_F
Partition: PROTECT_S
Partition: SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: MISC
Partition: LOGO
Partition: EXPDB
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: FAT
Partition: BMTPOOL
Start dumping flash, this can take up to 1 hour.......
Start processing MBR  MBR
Reading:  BEGIN: 0x880000         - LEN: 0x80000        
Start processing EBR1  EBR1
Reading:  BEGIN: 0x900000         - LEN: 0x80000        
Start processing proinfo
Reading:  BEGIN: 0x980000         - LEN: 0x300000      
Start processing nvram
IMEI[1] from NVRAM: 350000000000000
IMEI[2] from NVRAM: 350000000000000
Start processing PROTECT_F
Reading:  BEGIN: 0x1180000        - LEN: 0xa00000      
Start processing PROTECT_S
Reading:  BEGIN: 0x1b80000        - LEN: 0xa00000      
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing SEC_RO  secro.img
Reading:  BEGIN: 0x3200000        - LEN: 0x40000        
Start processing LOGO ......
Start processing system
Reading:  BEGIN: 0x3fc0000        - LEN: 0x2bc00000    
Saved to : C:\Users\Mus\Documents\Android_MTK\firmware_backup\MT6572_EMMC_KOT49H__4_4_2_nowa5 Pro_welcome_2020_02_23_14_54)
Wait untill phone will start charging.
[0]All done.

• Info

 Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.3
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM34)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x4c3758484d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 1501004C3758484D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000    
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000      [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM3)
Build ID: KOT49H
Display ID: ALPS.KK1.MP7.Band1.2.5.V1.3-2019-11-19_11-19
Version: 4.4.2
Model: nowa5 Pro
Device: zl9e_ctx_nowa5_pro_emmc64_8_ddr1_b15_fl
Brand: welcome
Manufacturer: alps
Region: US
Mediatek Version Release: ALPS.KK1.MP7.Band1.2.5.V1.3
IMEI[1]: 350000000000000
IMEI[2]: 350000000000000
Wait untill phone will start charging.
[0]All done.

:>>> MT6572_EMMC_KOT49H__4_4_2_nowa5 Pro_welcome_2020_02_23_14_54)

:>>> preloader_zl9e_ctx_nowa5_pro_emmc64_8_ddr1_b15_fl


• FIrmware : Here

• Nvram : Here



Best regardis


♠Br-PeraTa♠