Help oppo F7 dead after isp pinout

[Neeraj.kumar37]

after isp pinouts oppo F7 cph1819 gone to dead condition only show mtk com port any help please

 

[saifisolutions]

Only two method available for recover.
1:- Flash with Autho Login
2:- Flash with EMMC Tool[I had done mine with Z3x Easy Jtag].

Both have 100% Chances of recover your bricked handset

 

[Abdullah]

after isp pinouts oppo F7 cph1819 gone to dead condition only show MTK COM Port any help, please

Just remove ISP point's jumper and clean your PCB Carefully it will be done
Oppo F7 CPH1819 / CPH1811 ISP Pinout
​

 

[Neeraj.kumar37]

Only two method available for recover.
1:- Flash with Autho Login
2:- Flash with EMMC Tool[I had done mine with Z3x Easy Jtag].

Both have 100% Chances of recover your bricked handset

Thank u bro i ll check with online flashing bcx this time i dont have z3x Jtag.. thnx again..

 

[Neeraj.kumar37]

Just remove ISP point's jumper and clean your PCB Carefully it will done

I already did it many times .. and this is not only my prb many people facing this issue when i search for my own issue then i aware that not only me but alot of people facing this problem..

 

[pintu das]

yes brother same with me,,,

can you recover your phone ???

 

[Neeraj.kumar37]

yes brother same with me,,,

can you recover your phone ???

Still not..

 

[Ashfakjahangir07]

World first time without login. Mi Y3

 

[waqas_ali6012003]

mtk com port cause we damge our pinouts while removing jumper ,, duble check your all pinouts clk and cmd resitense damge cause of mtk port for me

 

[ziaullah]

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x488698C0
Manufacturing date: Jan 2018
CID: 90014A48 43473861 34A24886 98C01508
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Writing preloader header... Done
Current partition access:
Access to boot partition 1
Writing preloader at 0x00000000 (543 sectors)... Done in 0.594 s
Writing boot partition config to 0x48... Done
Processing file: "recovery.img"...
Writing recovery at 0x00108000 (84076 sectors)... Failed to write block 0x01468000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)

 

[Repairslab]

after isp pinouts oppo F7 cph1819 gone to dead condition only show mtk com port any help please

TRY TO FLASH WITH UFI ANDROID TOOL ,PUT FIRMWARE FILE IN UFI OPPO F7 FOLDER ,SELECT SCATTER FILE AND TRY TO FLASHING

 

[Alpha2018]

Oppo f7 dead after test point method. mtk phones remain in mtk port test point. But, I couldn't identify OPPO F7 CLK Resistor. So, would you please help me find out that resistor and make that phone alive?

Thank you!

 

[Mohamed_shavu]

Me too, because it lost the connection from the emmc, i think the voltage of the emmc is not stable.

 

[nonotech]

Only two method available for recover.
1:- Flash with Autho Login
2:- Flash with EMMC Tool[I had done mine with Z3x Easy Jtag].

Both have 100% Chances of recover your bricked handset

do you have files and procedure using Z3x easy jtag brother?

 

[omair.sidic]

easy jtag plus
support oppo f7 1819 dead?

 

[aravind4u49]

Remove clock resister and direct
Tested