Nokia Rm-1035 Contact Service Solutiton
1st Method:-
1 first mobile read flash in miracle box (10th boot)
2 and save back file
3 then write download file
4 phone show contact service
5 again then write read file
6 phone same back position
7 again write download file but only click firmware option & auto Decry
8 but this time flashing 91% write after faild show but dontworry
9 but set 100% OK
10 total (3 times flashing)...
2nd Method:-
Dead Mode is Selected
Waiting for USB device...
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 65 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : E72256CE5A3B7D1A7E93C90AC8F50095
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Elapsed: 00:00:26
Connect phone on selected interface...
2nd:- Higher Version Or Downgrade Flash.....
3rd:- >>>>>> ( Project ID : CRYSTAL.14.00.11.p1 ) <<<<<<< 1st Chek Version
Same File Flash After Problem Solve.....
Already Some Mobiles Done.....
1st Method:-
1 first mobile read flash in miracle box (10th boot)
2 and save back file
3 then write download file
4 phone show contact service
5 again then write read file
6 phone same back position
7 again write download file but only click firmware option & auto Decry
8 but this time flashing 91% write after faild show but dontworry
9 but set 100% OK
10 total (3 times flashing)...
2nd Method:-
Dead Mode is Selected
Waiting for USB device...
- Phone should be Off!
- Battery must be charged and inserted! ( if not used external power )
--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 65 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : E72256CE5A3B7D1A7E93C90AC8F50095
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
BROM/BL stage done>>>>> Project ID : CRYSTAL.14.00.11.p1 <<<<<<< 1st Chek Version
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE
Elapsed: 00:00:26
Connect phone on selected interface...
2nd:- Higher Version Or Downgrade Flash.....
3rd:- >>>>>> ( Project ID : CRYSTAL.14.00.11.p1 ) <<<<<<< 1st Chek Version
Same File Flash After Problem Solve.....
Already Some Mobiles Done.....