please help me ! problem

Aug 25, 2020
10
0
dhaka
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x56, serial number: 0x20160613
Manufacturing date: Jun 2016
CID: 15010030 30303030 30562016 061354D0
CSD: 90270132 0F5903FF F6DB7FE0 8A40403A
EXT_CSD revision: 1.5 (MMC v4.41)
Failed to switch partition to 3, error code: 0
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
Error: failed to switch to RPMB partition.
Partition info:
Boot1: 512 KiB
Boot2: 512 KiB
RPMB: 128 KiB
User area: 0 B(2,197,796,421,632 bytes)
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
moviNAND: card is run in boot mode.


aaa.png
KMGD6001BM-B421(GD6BMB-rev_0x01-2CE59BB6)-1631035481.ffu
 

bharatkumars

Friend's Martview
May 11, 2020
108
25
bihar
Sonork ID
0
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x56, serial number: 0x20160613
Manufacturing date: Jun 2016
CID: 15010030 30303030 30562016 061354D0
CSD: 90270132 0F5903FF F6DB7FE0 8A40403A
EXT_CSD revision: 1.5 (MMC v4.41)
Failed to switch partition to 3, error code: 0
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
Error: failed to switch to RPMB partition.
Partition info:
Boot1: 512 KiB
Boot2: 512 KiB
RPMB: 128 KiB
User area: 0 B(2,197,796,421,632 bytes)
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
moviNAND: card is run in boot mode.


View attachment 35108
KMGD6001BM-B421(GD6BMB-rev_0x01-2CE59BB6)-1631035481.ffu
Emmc dead
 

aftab_ansari5287

Super Moderator
Aug 16, 2019
2,415
3,204
INDIA
Skype
aftab_ansari5287
PayPal:

Donate money to this user
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x56, serial number: 0x20160613
Manufacturing date: Jun 2016
CID: 15010030 30303030 30562016 061354D0
CSD: 90270132 0F5903FF F6DB7FE0 8A40403A
EXT_CSD revision: 1.5 (MMC v4.41)
Failed to switch partition to 3, error code: 0
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
Error: failed to switch to RPMB partition.
Partition info:
Boot1: 512 KiB
Boot2: 512 KiB
RPMB: 128 KiB
User area: 0 B(2,197,796,421,632 bytes)
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
moviNAND: card is run in boot mode.



KMGD6001BM-B421(GD6BMB-rev_0x01-2CE59BB6)-1631035481.ffu

KMGD6001BM-B421 ffu file Download From Here

Update Emmc Fw (your Emmc will start working again)
 

sherifellord

Junior Member
Jan 4, 2020
2
1
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: 000000 (0x303030303030), rev: 0x56, serial number: 0x20160613
Manufacturing date: Jun 2016
CID: 15010030 30303030 30562016 061354D0
CSD: 90270132 0F5903FF F6DB7FE0 8A40403A
EXT_CSD revision: 1.5 (MMC v4.41)
Failed to switch partition to 3, error code: 0
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
Error: failed to switch to RPMB partition.
Partition info:
Boot1: 512 KiB
Boot2: 512 KiB
RPMB: 128 KiB
User area: 0 B(2,197,796,421,632 bytes)
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
moviNAND: card is run in boot mode.



KMGD6001BM-B421(GD6BMB-rev_0x01-2CE59BB6)-1631035481.ffu
KMDV6001DB-B625 Firmware(FFu)
 
  • Like
Reactions: eosm88
Top