Legitunlocks.com
IC Chip

A013F u4 imei repair fail z3x

Muhammad_1988

Muhammad_1988

Blocked
Apr 11, 2021
32
11
UZB
Hello
In one of the announcment of z3x said that bit 4 is supported now.But its fail.
Here is the announcment

Z3x Samsung Tool Pro 43.9 Update. New devices added. SM-A013F/G bit4 supported now

New phones added to supported:
SM-E225F (Flashing, Read Unlock Codes using credits, reboot download/recovery)
SM-M325F (Flashing, Read Unlock Codes using credits, reboot download/recovery)
SM-A013F 4bit supported now
SM-A013G 4bit supported now

Fixed:
- SM-N985F Read codes

Improved code reading:
- Shannon upload
- SM-A325F
- SM-A325M



Here is z3x imei repair fail log

REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A013F
Software version: 43.13

Waiting ADB device... OK
Reading phone info...
Model: SM-A013F
Android version: 10
PDA version: A013FXXU4AUG1
CSC version: A013FOXM4AUG1
Phone version: A013FXXU4AUF2
Product code: SM-A013FZRDSKZ
CSC country code: Kazakhstan
CSC sales code: SKZ
Carrier ID: SER
Phone SN: R58R37EKWEN
IMEI: 35544127606******
HW version: REV0.2
RF cal date: 20210330
Chip name: MT6739
Modem board: MT6739
Security patch: 2021-07-01
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching server... OK
Checking server answer... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... error (5)
AP version A013FXXU4AUG1 is not supported, downgrade if possible

Done with Samsung Tool PRO v.43.13
 
F

federalgsm

Active Member
Apr 30, 2017
28
6
rwp
Skype
federalgsm
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A013G
Software version: 43.16

Waiting ADB device... OK
Reading phone info...
Model: SM-A013G
Android version: 10
PDA version: A013GXXU4AUG4
CSC version: A013GOJM4AUG4
Phone version: A013GXXU4AUG4
Product code: SM-A013GZKDXSG
CSC country code: UAE
CSC sales code: XSG
Carrier ID: XSG
Phone SN: RZ8xxxxxx
IMEI: 35xxxxxxxxxxxxxx
HW version: REV0.2B
RF cal date: 20201218
Chip name: MT6739
Modem board: MT6739
Security patch: 2021-07-01
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching server... OK
Checking server answer... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... error (5)
AP version A013GXXU4AUG4 is not supported, downgrade if possible

Done with Samsung Tool PRO v.43.16
 
A

Amir511

Active Member
Nov 7, 2021
46
1
Iran

https://forum.**************/ubb/icons/icon4.gif A013F U4 Repair IMEI Failed [Answered]
Samsung Tool Pro 43.9 Update. New devices added. SM-A013F/G bit4 supported now

New phones added to supported:

SM-E225F (Flashing, Read Unlock Codes using credits, reboot download/recovery)
SM-M325F (Flashing, Read Unlock Codes using credits, reboot download/recovery)

SM-A013F 4bit supported now
SM-A013G 4bit supported now

Hi, there is said that, Bit4 support, but imei repair failed on this model. Which firmware can I use for IMEI repair operation for A013f U4? Thanks.
 
A

Amir511

Active Member
Nov 7, 2021
46
1
Iran
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A013G
Software version: 43.16

Waiting ADB device... OK
Reading phone info...
Model: SM-A013G
Android version: 10
PDA version: A013GXXU4AUG4
CSC version: A013GOJM4AUG4
Phone version: A013GXXU4AUG4
Product code: SM-A013GZKDXSG
CSC country code: UAE
CSC sales code: XSG
Carrier ID: XSG
Phone SN: RZ8xxxxxx
IMEI: 35xxxxxxxxxxxxxx
HW version: REV0.2B
RF cal date: 20201218
Chip name: MT6739
Modem board: MT6739
Security patch: 2021-07-01
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching server... OK
Checking server answer... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... error (5)
AP version A013GXXU4AUG4 is not supported, downgrade if possible
 
Yuranc8

Yuranc8

Friend's Martview
Aug 11, 2021
179
92
Quelimane
Amir511 said:
REPAIR INSTRUCTIONS:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Reboot to...' button and select mode to reboot (download or recovery).

Operation: Repair
Selected model: SM-A013G
Software version: 43.16

Waiting ADB device... OK
Reading phone info...
Model: SM-A013G
Android version: 10
PDA version: A013GXXU4AUG4
CSC version: A013GOJM4AUG4
Phone version: A013GXXU4AUG4
Product code: SM-A013GZKDXSG
CSC country code: UAE
CSC sales code: XSG
Carrier ID: XSG
Phone SN: RZ8xxxxxx
IMEI: 35xxxxxxxxxxxxxx
HW version: REV0.2B
RF cal date: 20201218
Chip name: MT6739
Modem board: MT6739
Security patch: 2021-07-01
SIM State: ABSENT,ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching server... OK
Checking server answer... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... error (5)
AP version A013GXXU4AUG4 is not supported, downgrade if possible
Click to expand...
Hello UNLOCK BL and flash MODEM U3 it will downgrade use SCATTER FW
 
A

Amir511

Active Member
Nov 7, 2021
46
1
Iran
Yuranc8 said:
Hello UNLOCK BL and flash MODEM U3 it will downgrade use SCATTER FW
Click to expand...
Hello, good time, can you help me?
I did everything for the a013g u4 head patch, but its build number was not u3 ..
Can it be solved by burning modem u3?
What tool should I use to burn?
I unlocked the bootloader and burned the super.img a013f u3 file with Chimra and unlocked the flash from the point test method.
 
You must log in or register to reply here.
Top