Infinity A035f samsung

Infinity Box & Dongle

merdjiosse

Active Member
Jan 22, 2020
15
1
Hello team
I get a samsung a035f dead after dwngrade
I flash it with pac file CM2SP2,
know it stuck in fastboot mode
Try to read firmware from anather device get error
Can you fix this problel please
 

merdjiosse

Active Member
Jan 22, 2020
15
1
hello
try read flash get this msg
Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_4h10_Natv-userdebug-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!


>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!
try identifyng
Operation : Identify [ v2.14 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : UNISOC : ums9230_4h10_Natv
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
>>> ERROR : FLASH FDL NOT started!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!
operation wrte flas
Operation : Flash Firmware [ v2.14 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : PAC : ums9230_4h10_Natv-userdebug-gms_QOGIRL6_R_SIGN.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x35
PMTMng : Update PMT Ok!

Prepare target ...
Prepare Ok!

CODE : qogirl6_pubcp_AGCP_DSP.bin
ERASE : L_RUNTIMENV1
CODE : qogirl6_pubcp_LTEA_DSP.bin
CODE : boot.img
ERASE : MISC
UBOOT : lk-sign.bin
CODE : recovery.img
ERASE : METADATA
FSIMG : sec_efs.img
CODE : vbmeta_vendor.img
CODE : vbmeta-sign.img
CODE : teecfg-sign.bin
CODE : sml-sign.bin
UBOOT : u-boot-spl-16k-ufs-sign.bin
FSIMG : cache.img
CODE : unisoc_HD_720_1640.bmp
CODE : gnssmodem-sign.bin
FSIMG : vendor_efs.img
CODE : unisoc_HD_720_1640.bmp
CODE : tos-sign.bin
CODE : qogirl6_pubcp_DM_DSP.bin
UBOOT : u-boot-spl-16k-emmc-sign.bin
CODE : qogirl6_m3l_cm4.bin
FSIMG : socko.img
FSIMG : userdata.img
FSIMG : odmko.img
CODE : dtbo.img
ERASE : SYSDUMPDB
FSIMG : super.img
CODE : EXEC_KERNEL_IMAGE-sign.bin
CODE : vbmeta_system.img
CODE : prodnv.img
CODE : SC9600_qogirl6_pubcp_modem.dat
FSIMG : persist.img
ERASE : UBOOT_LOG
CODE : qogirl6_pubcp_deltanv.bin
Flashing finished!
Reconnect Power/Cable!
any solution please !!
 

catharsis

Junior Member
May 11, 2023
3
0
Caucasus
Hello team
I get a samsung a035f dead after dwngrade
I flash it with pac file CM2SP2,
know it stuck in fastboot mode
Try to read firmware from anather device get error
Can you fix this problel please
Hi! Sorry for my bad English, I'm translating through google translator. Have you solved the problem with A035F? I have the same situation, I can not revive it in any way
 
Top