hi members here ...
Is there any of you have a problem like me ??
Any time skhynix emmc read in emmc socket will become defected.
Here is one of log while working emmc become damage :
IDENTIFY EMM :
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-XXXX
Boot version: 1.03, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2s (0x483447327311), rev: 0x01, serial number: 0x75F25078
Manufacturing date: Oct 2015
CID: 90014A48 34473273 110175F2 5078A236
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 512 KiB
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: mrvl, cpu abi: armeabi-v7a
manufacturer: samsung
board: PXA19x8, name: j1aceltedx
brand: samsung, model: SM-J110G
build id: KTU84P, version: 4.4.4 Lollipop (KTU84P.J110GDXU0APB1)
build description: j1aceltedx-user 4.4.4 KTU84P J110GDXU0APB1 release-keys
Internal storage: 2.25 GiB
crypto state: unencrypted
Selected: [HYNIX] eNAND H9TP32A4GDDCPR-KGM/4GB (BGA162)
READ :
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-XXXX
Boot version: 1.03, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2s (0x483447327311), rev: 0x01, serial number: 0x75F25078
Manufacturing date: Oct 2015
CID: 90014A48 34473273 110175F2 5078A236
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Reading extcsd, size: 512 bytes...
File saved to "\\%BACKUPS%\samsung\SM-J110G(KTU84P.J110GDXU0APB1-4.4.4-KTU84P)[H9TP32A4GDDCPR-KGM_75F25078]\ext_csd.bin"
Current partition access:
Access to boot partition 1
Reading boot1, size: 4 MiB... Done in 0.220 s
File saved to "\\%BACKUPS%\samsung\SM-J110G(KTU84P.J110GDXU0APB1-4.4.4-KTU84P)[H9TP32A4GDDCPR-KGM_75F25078]\boot1.bin"
Current partition access:
Access to boot partition 2
Reading boot2, size: 4 MiB... Done in 0.267 s
File saved to "\\%BACKUPS%\samsung\SM-J110G(KTU84P.J110GDXU0APB1-4.4.4-KTU84P)[H9TP32A4GDDCPR-KGM_75F25078]\boot2.bin"
Current partition access:
Access to user area
Reading userarea, size: 256 MiB... cmd response: 0xB00, card status: 0x0, card state: 5 (Card is sending an operation)
status: unknown (0)
--- Try to decrease the clock speed ---
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
IDENTIFY EMMC again :
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-XXXX
Boot version: 1.03, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 1 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: Card (removable) - High density MMC
Manufacturer ID: 0x65 (Unknown)
Product name: MMOR (0x4d204d4f5212), rev: 0x81, serial number: 0x00000615
Manufacturing date: Apr 2017
CID: 65646F4D 204D4F52 12810000 0615444C
Bad CID detected, eMMC might be damaged !!!
CSD: D07FFF32 0F59007F F6DB8000 1E40001C
Bad CSD detected, eMMC might be damaged !!!
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 1.83 GiB(2,197,796,421,632 bytes)
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EMMC become damage from working phone just read in UFI ...
Anybody have this kind of problem ??
Comment here please ....
Is there any of you have a problem like me ??
Any time skhynix emmc read in emmc socket will become defected.
Here is one of log while working emmc become damage :
IDENTIFY EMM :
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-XXXX
Boot version: 1.03, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2s (0x483447327311), rev: 0x01, serial number: 0x75F25078
Manufacturing date: Oct 2015
CID: 90014A48 34473273 110175F2 5078A236
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Cache size: 512 KiB
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: mrvl, cpu abi: armeabi-v7a
manufacturer: samsung
board: PXA19x8, name: j1aceltedx
brand: samsung, model: SM-J110G
build id: KTU84P, version: 4.4.4 Lollipop (KTU84P.J110GDXU0APB1)
build description: j1aceltedx-user 4.4.4 KTU84P J110GDXU0APB1 release-keys
Internal storage: 2.25 GiB
crypto state: unencrypted
Selected: [HYNIX] eNAND H9TP32A4GDDCPR-KGM/4GB (BGA162)
READ :
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-XXXX
Boot version: 1.03, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H4G2s (0x483447327311), rev: 0x01, serial number: 0x75F25078
Manufacturing date: Oct 2015
CID: 90014A48 34473273 110175F2 5078A236
CSD: D07F0132 0F5903FF FFFFFFEF 8A4040DA
EXT_CSD revision: 1.6 (MMC v4.5, v4.51)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
Reading extcsd, size: 512 bytes...
File saved to "\\%BACKUPS%\samsung\SM-J110G(KTU84P.J110GDXU0APB1-4.4.4-KTU84P)[H9TP32A4GDDCPR-KGM_75F25078]\ext_csd.bin"
Current partition access:
Access to boot partition 1
Reading boot1, size: 4 MiB... Done in 0.220 s
File saved to "\\%BACKUPS%\samsung\SM-J110G(KTU84P.J110GDXU0APB1-4.4.4-KTU84P)[H9TP32A4GDDCPR-KGM_75F25078]\boot1.bin"
Current partition access:
Access to boot partition 2
Reading boot2, size: 4 MiB... Done in 0.267 s
File saved to "\\%BACKUPS%\samsung\SM-J110G(KTU84P.J110GDXU0APB1-4.4.4-KTU84P)[H9TP32A4GDDCPR-KGM_75F25078]\boot2.bin"
Current partition access:
Access to user area
Reading userarea, size: 256 MiB... cmd response: 0xB00, card status: 0x0, card state: 5 (Card is sending an operation)
status: unknown (0)
--- Try to decrease the clock speed ---
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
IDENTIFY EMMC again :
Connection status: EHCI:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-XXXX
Boot version: 1.03, FW version: 1.11 (Dec 6 2017 17:13:32)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 1 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: Card (removable) - High density MMC
Manufacturer ID: 0x65 (Unknown)
Product name: MMOR (0x4d204d4f5212), rev: 0x81, serial number: 0x00000615
Manufacturing date: Apr 2017
CID: 65646F4D 204D4F52 12810000 0615444C
Bad CID detected, eMMC might be damaged !!!
CSD: D07FFF32 0F59007F F6DB8000 1E40001C
Bad CSD detected, eMMC might be damaged !!!
EXT_CSD revision: 1.5 (MMC v4.41)
Partition info:
Boot1: 2048 KiB
Boot2: 2048 KiB
RPMB: 128 KiB
User area: 1.83 GiB(2,197,796,421,632 bytes)
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x03
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EMMC become damage from working phone just read in UFI ...
Anybody have this kind of problem ??
Comment here please ....
