• Firmware LG X150 {bello 2} MT6582 5.0.2 By NCK Dongle •
:- INFO -:
Code:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.8
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM54)
Boot mode: Brom
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 150100513732534D42
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM107)
Build ID: LRX21M
Version: 5.0.2
Build Date: Tue Nov 10 16:15:03 CST 2015
Model: v10
Brand: lge
Device: v10
Manufacturer: LGE
Region: US
Mediatek Version Release: ALPS.L0.MP2.V1_ARIMA6582.W.L_P110
This phone have FRP partition.
IMEI[1]: 350000000000000
IMEI[2]: 350000000000000
Wait untill phone will start charging.
[0]All done.:-INFO Read-:
Code:
Action : Read Firmware.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.8
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM54)
Boot mode: Brom
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 150100513732534D42
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100513732534D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM107)
Build ID: LRX21M
Version: 5.0.2
Build Date: Tue Nov 10 16:15:03 CST 2015
Model: v10
Brand: lge
Device: v10
Manufacturer: LGE
Region: US
Mediatek Version Release: ALPS.L0.MP2.V1_ARIMA6582.W.L_P110
IMEI[1]: 350000000000000
IMEI[2]: 350000000000000
Dumping Preloader.
Partition: PRELOADER
Partition: MBR
Partition: EBR1
Partition: PRO_INFO
Partition: NVRAM
Partition: PROTECT_F
Partition: PROTECT_S
Partition: SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: MISC
Partition: LOGO
Partition: EBR2
Partition: FLEX
Partition: EXPDB
Partition: FRP
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: BMTPOOL
Start dumping flash, this can take up to 1 hour.......
Start processing MBR MBR
Reading: BEGIN: 0x880000 - LEN: 0x80000
Start processing EBR1 EBR1
Reading: BEGIN: 0x900000 - LEN: 0x80000
Start processing proinfo.bin ......
Reading: BEGIN: 0x980000 - LEN: 0x300000
Start processing nvram.bin ......
Reading: BEGIN: 0xc80000 - LEN: 0x500000
Start processing protect1.img ......
Reading: BEGIN: 0x1180000 - LEN: 0xa00000
Start processing protect2.img ......
Reading: BEGIN: 0x1b80000 - LEN: 0xa00000
Start processing UBOOT
Start processing BOOTIMG
Start processing RECOVERY
Start processing SEC_RO secro.img
Reading: BEGIN: 0x4600000 - LEN: 0x600000
Start processing LOGO ......
Start processing EBR2 EBR2
Reading: BEGIN: 0x4f80000 - LEN: 0x80000
Start processing FLEX flex.img
Reading: BEGIN: 0x5000000 - LEN: 0x20000000
Start processing system
Reading: BEGIN: 0x25b00000 - LEN: 0x70800000
Saved to : C:\nckdongle\android_mtk\Android_MTK_Backup_Folder\firmware_backup\MT6582_EMMC_LRX21M__5_0_2_v10_lge_2020_05_24_02_24)
Wait untill phone will start charging.
[0]All done.
Last edited:
