UFi HUAWEI Y3 2018/CAG-L02 DUMP FILE

UFi Box & Dongle

luyanda

Active Member
Mar 23, 2017
94
7
durban
I NEED DUMP FILE FOR CAG LO2 PHONE WAS HANGING I WAS TRYING TO FLASH IT WITH SCATTER FILE

Connection status: EHCI:HUB:HUB[#4]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-9075
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: FN62MB (0x464e36324d42), rev: 0x06, serial number: 0x6423D056
Manufacturing date: Jul 2018
CID: 15010046 4E36324D 42066423 D056756E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 512 KiB [Provisioned, counter: 74]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00

ANDROID System Info:
platform: MT6737M, cpu abi: armeabi-v7a
manufacturer: HUAWEI
board: CAG-L02, name: full_cro_go
brand: HUAWEI, model: CAG-L02 ()
build model list: CAG-L02 ()
build id: HUAWEICAG-L02, version: 8.1.0 [Oreo] (CairoGO-L02C316B134)
build description: full_cro_go-user 8.1.0 HUAWEICAG-L02 1576573113 release-keys

crypto state: encrypted?
EXT_CSD backup saved to "\\%BACKUPS%\FN62MB_6423D056.ext_csd"
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMFN60012M-B214/8GB+LPDDR3 8Gb (BGA221)
 

parves

Active Member
Sep 21, 2019
19
4
Bangladesh
I NEED DUMP FILE FOR CAG LO2 PHONE WAS HANGING I WAS TRYING TO FLASH IT WITH SCATTER FILE

Connection status: EHCI:HUB:HUB[#4]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-9075
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: FN62MB (0x464e36324d42), rev: 0x06, serial number: 0x6423D056
Manufacturing date: Jul 2018
CID: 15010046 4E36324D 42066423 D056756E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 512 KiB [Provisioned, counter: 74]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00

ANDROID System Info:
platform: MT6737M, cpu abi: armeabi-v7a
manufacturer: HUAWEI
board: CAG-L02, name: full_cro_go
brand: HUAWEI, model: CAG-L02 ()
build model list: CAG-L02 ()
build id: HUAWEICAG-L02, version: 8.1.0 [Oreo] (CairoGO-L02C316B134)
build description: full_cro_go-user 8.1.0 HUAWEICAG-L02 1576573113 release-keys

crypto state: encrypted?
EXT_CSD backup saved to "\\%BACKUPS%\FN62MB_6423D056.ext_csd"
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMFN60012M-B214/8GB+LPDDR3 8Gb (BGA221)
paid file
Huawei Y3 2017 CRO-U00 Dump File Ufi Box.
 
Top