If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here

Sumitr3ddy

Junior Member
Aug 31, 2019
2
0
hi anyone plz help 1o .or e stuck on usb diag port after flash
now tell me how to recover using ufi i cant find any method
so am posting hare for help
 

hellowbd

Active Member
Aug 10, 2017
58
28
Bangladesh
Skype
hellowstorebd
OPPO A7 IMEI REPAIR PROBLEM

Using Port: Qualcomm HS-USB Android DIAG 901D (COM71)
New imei[1]: 355788065465313
New imei[2]: 355788065465305
Getting imei signature from server...
[SERVER] Error: Undefined phone id, please report this issue to support !
Writing new imei... failed to write imei[2] , error: 0 (Request completed okay)
failed to write imei[1] , error: 0 (Request completed okay)
Done.

I Have Credit,,......Please Give Me Solouation........................
 

robin.mutum

Active Member
Jun 7, 2019
15
1
xiaomi redmi 6 pro stug on logo after flash same problem anybody help
Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9077
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RH64AB (0x524836344142), rev: 0x05, serial number: 0x80659A0F
Manufacturing date: Mar 2018
CID: 15010052 48363441 42058065 9A0F3566
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: Xiaomi
board: msm8953, name: sakura
brand: xiaomi, model: Redmi 6 Pro
build model list: Redmi 6 Pro
build id: OPM1.171019.019, version: 8.1.0 Oreo (ZQL1715-sakura-build-20180903193125)
build description: sakura-user 8.1.0 OPM1.171019.019 V10.0.2.0.ODICNFH release-keys

Internal storage: 52.18 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMRH60014A-B614/64GB (BGA221)
 

robin.mutum

Active Member
Jun 7, 2019
15
1
Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9077
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RH64AB (0x524836344142), rev: 0x05, serial number: 0x80659A0F
Manufacturing date: Mar 2018
CID: 15010052 48363441 42058065 9A0F3566
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 0% - 10% device life time used
moviNAND Smart report:
Error Mode: 0x464C457F (Invalid)
 

ahmedalaa214

Junior Member
Oct 14, 2018
1
0
[Xiaomi] Redmi 6A operation error but credit discount


log

UFI software version: 1.4.0.1467
Official website:
UFi Box is a powerful EMMC Service Tool & UFi Dongle Android
Official support forum:
UFIXERS Community
UFI Box / Dongle
Official facebook page:
Ufi Box & Dongle
System info:
Processor: AMD Ryzen 5 2600 Six-Core Processor 3.39 GHz (12 CPUs)
Installed RAM: 7.93 GiB (49 % free)
OS: Windows 10 (Version 10.0, Build 18362, 64-bit)
Loaded drivers:
ldr [bxapp] -> 128

Please "Identify Device" at first, before any other operation.
storage id: HAG4a2, QE63MB, H8G1e, HAG2e, RX1BMB, H8G2d, R311MB, P1J95K, FN62MB, 032G34, QN16MB, AJNB4R, QD63MB, BJNB4R, CJNB4R, QE13MB, Q3J97V
Overview:
- Flashing, erase frp, erase userdata supported
for Qualcomm platform, go to \\FLASH:QUALCOMM
for MediaTek platform, go to \\FLASH:MEDIATEK
- For new models, flashing requires bootloader authorization by server
- Any Bootloader authorization will consume credit, use it with caution at your own risk !!!
- To avoid any toubles, please always use official firmware !!!
- For new models, flashing requires server authentication and UFI CREDIT, go to \\ACCOUNT for the list of services and costs
- Service cost for [Xiaomi] Redmi 6A:
XIAOMI_FL(Bootloader Authorization(QC, MTK) - Including Identify, Flashing, SpecialTask): 3 credits
--------------------
AUTH info: MTK, version: 1
BROM version[1]: 7.1625.3.0
DownloadAgent: MTK_AllInOne_DA.bin
hash: f290181f3f1f47f1e74fbccd9de739a6cd83e4ef, size: 6.11 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done.
Detected [BootROM] MediaTek USB Port (COM166)
Connection status: XHCI:HUB3:HUB3:HUB3:HUB3:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] Insufficient credits, you have 0 credits left !
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
BROM_SCMD_SLA error. code 0x7046
AUTH info: MTK, version: 1
BROM version[1]: 7.1625.3.0
DownloadAgent: MTK_AllInOne_DA.bin
hash: f290181f3f1f47f1e74fbccd9de739a6cd83e4ef, size: 6.11 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done.
Detected [BootROM] MediaTek USB Port (COM166)
Connection status: XHCI:HUB3:HUB3:HUB3:HUB3:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,2b02587b8d834126] ref id: XF00753370539, cost: 3, your balance: 7
------------
List index out of bounds (-250)

------------
Authentication aborted by user request.
BROM version[1]: 7.1625.3.0
DownloadAgent: MTK_AllInOne_DA[0].bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12019/09/11 20:00:57, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Error: timeout
AUTH info: MTK, version: 1
BROM version[1]: 7.1625.3.0
DownloadAgent: MTK_AllInOne_DA[0].bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12019/09/11 20:00:57, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done.
Detected [BootROM] MediaTek USB Port (COM166)
Connection status: XHCI:HUB3:HUB3:HUB3:HUB3:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,2b02587b8d834126] ref id: XF07239256471, cost: 3, your balance: 4
------------
List index out of bounds (-250)

------------
BROM version[1]: 7.1625.3.0
DownloadAgent: MTK_AllInOne_DA[0].bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12019/09/11 20:00:57, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done.
Detected [BootROM] MediaTek USB Port (COM166)
Connection status: XHCI:HUB3:HUB3:HUB3:HUB3:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
Error: -1073348607 (STATUS_BROM_CMD_STARTCMD_FAIL)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
Please press power button for 10 secs or disconnect and reconnect the battery(if possible) and retry!
BRom pototcol error.
 

vasilbojilov

Active Member
Oct 17, 2018
16
5
Skype
vaskes81
REDMI NOTE 7 PRO FLASH ERROR - CREDITS GONE


Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM27)
Connection status: EHCI:HUB:USB 2.10 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0x893dd092
MSM HW ID: 0x000950e1
OEM Public Key Hash: 0x1bebe3863a6781db4b01086063007334de9e5ca14971c7c4f4358ec9d79cda46
SBL SW version: 1
Firehose: prog_emmc_firehose_Sm6150_ddr.elf
hash: 53fa6fe117d986459bb8cb1e77299ec09bac0730, size: 665.89 KiB
QC_IMAGE_VERSION: BOOT.XF.3.1-00208-SM6150LZB-1
IMAGE_VARIANT: SDM6150LA
OEM_IMAGE_VERSION: c3-miui-ota-bd123.bj
Sending firehose loader... Done
Handshaking...
Sending ping... Done
INFO: Binary build date: Aug 11 2019 20:53:14
INFO: Chip serial num: 2302529682 (0x893dd092)
Sending configurations...
ERROR: Only nop and sig tag can be recevied before authentication.
[SERVER] XIAOMI_FL [violet,893dd092] ref id: XF08123201841, cost: 4, your balance: 6
MemoryName: eMMC
DateTime: Aug 11 2019 - 20:53:14
Version: 1
Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hDEaP3 (0x684445615033), rev: 0x30, serial number: 0x00000000
Capacity: 116.50 GiB(125,086,728,192 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
Processing rawprogram0.xml
Writing PrimaryGPT at 0x00000000 (34 sectors)... Done
Writing multiimgoem at 0x00045000 (27 sectors)... Done
Writing vbmeta at 0x00085000 (8 sectors)... Done
Writing qupfw at 0x000A5000 (97 sectors)... Done
Writing xbl_config at 0x00145000 (143 sectors)... Done
Writing storsec at 0x00185000 (40 sectors)... Done
Writing storsecbak at 0x001C5000 (40 sectors)... Done
Writing aop at 0x00205000 (314 sectors)... Done
Writing aopbak at 0x00285000 (314 sectors)... Done
Writing hyp at 0x00805000 (722 sectors)... Done
Writing hypbak at 0x00905000 (722 sectors)... Done
Writing cmnlib at 0x00A05000 (763 sectors)... Done
Writing cmnlibbak at 0x00B05000 (763 sectors)... Done
Writing cmnlib64 at 0x00C05000 (991 sectors)... Done
Writing cmnlib64bak at 0x00D05000 (991 sectors)... Done
Writing keymaster at 0x00E05000 (465 sectors)... Done
Writing keymasterbak at 0x00F05000 (465 sectors)... Done
Writing bluetooth at 0x01505000 (1752 sectors)... Done
Writing devcfg at 0x01605000 (86 sectors)... Done
Writing devcfgbak at 0x01805000 (86 sectors)... Done
Writing abl at 0x01A05000 (296 sectors)... Done
Writing ablbak at 0x01C05000 (296 sectors)... Done
Writing imagefv at 0x02005000 (40 sectors)... Done
Writing uefisecapp at 0x02805000 (247 sectors)... Done
Writing uefisecappbak at 0x02A05000 (247 sectors)... Done
Writing xbl at 0x04005000 (6170 sectors)... Done
Writing xblbak at 0x04805000 (6170 sectors)... Done
Writing tz at 0x05005000 (3944 sectors)... Done
Writing tzbak at 0x05805000 (3944 sectors)... Done
Writing logfs at 0x06005000 (32 sectors)... Done
Writing dtbo at 0x07005000 (16384 sectors)... Done
Writing dsp at 0x14005000 (65536 sectors)... Done
Writing splash at 0x18005000 (54708 sectors)... Done
Writing boot at 0x24005000 (131072 sectors)... Done
Writing recovery at 0x28005000 (131072 sectors)... Done
Writing modem at 0x40005000 (223651 sectors)... ERROR: Failed to parse xml, error at offset 6




SECOND ATTEMPT DIFFERENT ERROR AND NEW 4 CREDITS GONE ???????????????


Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM27)
Connection status: EHCI:HUB:USB 2.10 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0x893dd092
MSM HW ID: 0x000950e1
OEM Public Key Hash: 0x1bebe3863a6781db4b01086063007334de9e5ca14971c7c4f4358ec9d79cda46
SBL SW version: 1
Firehose: prog_emmc_firehose_Sm6150_ddr.elf
hash: 53fa6fe117d986459bb8cb1e77299ec09bac0730, size: 665.89 KiB
QC_IMAGE_VERSION: BOOT.XF.3.1-00208-SM6150LZB-1
IMAGE_VARIANT: SDM6150LA
OEM_IMAGE_VERSION: c3-miui-ota-bd123.bj
Sending firehose loader... Done
Handshaking...
Sending ping... Done
INFO: Binary build date: Aug 11 2019 20:53:14
INFO: Chip serial num: 2302529682 (0x893dd092)
Sending configurations...
ERROR: Only nop and sig tag can be recevied before authentication.
[SERVER] XIAOMI_FL [violet,893dd092] ref id: XF04991401790, cost: 4, your balance: 2
MemoryName: eMMC
DateTime: Aug 11 2019 - 20:53:14
Version: 1
Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hDEaP3 (0x684445615033), rev: 0x30, serial number: 0x00000000
Capacity: 116.50 GiB(125,086,728,192 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 116.48 GiB(125,074,145,280 bytes)
Processing rawprogram0.xml
Writing PrimaryGPT at 0x00000000 (34 sectors)... Done
Writing multiimgoem at 0x00045000 (27 sectors)... Done
Writing vbmeta at 0x00085000 (8 sectors)... Done
Writing qupfw at 0x000A5000 (97 sectors)... Done
Writing xbl_config at 0x00145000 (143 sectors)... Done
Writing storsec at 0x00185000 (40 sectors)... Done
Writing storsecbak at 0x001C5000 (40 sectors)... Done
Writing aop at 0x00205000 (314 sectors)... Done
Writing aopbak at 0x00285000 (314 sectors)... Done
Writing hyp at 0x00805000 (722 sectors)... Done
Writing hypbak at 0x00905000 (722 sectors)... Done
Writing cmnlib at 0x00A05000 (763 sectors)... Done
Writing cmnlibbak at 0x00B05000 (763 sectors)... Done
Writing cmnlib64 at 0x00C05000 (991 sectors)... Done
Writing cmnlib64bak at 0x00D05000 (991 sectors)... Done
Writing keymaster at 0x00E05000 (465 sectors)... Done
Writing keymasterbak at 0x00F05000 (465 sectors)... Done
Writing bluetooth at 0x01505000 (1752 sectors)... Done
Writing devcfg at 0x01605000 (86 sectors)... Done
Writing devcfgbak at 0x01805000 (86 sectors)... Done
Writing abl at 0x01A05000 (296 sectors)... Done
Writing ablbak at 0x01C05000 (296 sectors)... Done
Writing imagefv at 0x02005000 (40 sectors)... Done
Writing uefisecapp at 0x02805000 (247 sectors)... Done
Writing uefisecappbak at 0x02A05000 (247 sectors)... Done
Writing xbl at 0x04005000 (6170 sectors)... Done
Writing xblbak at 0x04805000 (6170 sectors)... Done
Writing tz at 0x05005000 (3944 sectors)... Done
Writing tzbak at 0x05805000 (3944 sectors)... Done
Writing logfs at 0x06005000 (32 sectors)... Done
Writing dtbo at 0x07005000 (16384 sectors)... Done
Writing dsp at 0x14005000 (65536 sectors)... Done
Writing splash at 0x18005000 (54708 sectors)... Done
Writing boot at 0x24005000 (131072 sectors)... Done
Writing recovery at 0x28005000 (131072 sectors)... Done
Writing modem at 0x40005000 (223651 sectors)... Done
Writing cache at 0x4C005000 (257 sectors)... Done
Writing system at 0x90005000 (6379937 sectors)... ERROR: SDCC Error 3 (3)
ERROR: Write Failed sector 6031128, size 2048 result 3
failed


???????????????????????????
 

mdarifvahi

Junior Member
Jul 20, 2019
3
0
Skype
mdarifvahit
Today Redmi 6A Have flash before Identify device 3 credit lost before flash

16-09-2019 12:03 XF01042664074 XIAOMI_FL cactus;be 1c1223a1417374df.. 3 1 1 117.216.57.22
 

abir1993

Member
May 23, 2017
14
0
Bangladesh
Skype
abir_hosain
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-1521
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0x2BDDD364
Manufacturing date: Jul 2018
CID: 15010047 4436424D 42012BDD D3647584
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
Failed entering Smart report mode (return code: 1, CMD Error: Timeout)
status: Command not legal for the card state
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGD6000BM-BXXX/32G


HOW TO DISABLE PASSWORD PROTECTION 6602
 

techno_world

Active Member
Aug 20, 2019
20
5
RMX 1945 After Format Handset completely dead , please give solution ,i have also try to wirte ext csd , please need solution its urgent
 

kenneth

Junior Member
Dec 3, 2016
3
1
Nigeria
I try to work with Oppo Flash A3S, but i keep getting "Error: service [OPPO_FL] is offline now, please check back later." When will server be on?
 

Alfiayah Cell

Member
Nov 3, 2018
8
0
manado,sulawesi utara
I ask the masters for help
AUTH info: , version: 0
BROM version[1]: 7.1625.3.0
DownloadAgent: MTK_AllInOne_DA.bin
hash: f290181f3f1f47f1e74fbccd9de739a6cd83e4ef, size: 6.11 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM9)
Connection status: XHCI:HUB3:HUB3:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
BROM_SCMD_SEND_AUTH error. code 0x7009
 
Top