ShohagMalik
Product Supporter
If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here
- Thread starter Deepesh Sharma
- Start date
ever since i bought ufi,most phone keeps giving me this error,what do i do??am tired
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-8770
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-8770
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
VRCELLPOINT
Junior Member
- Feb 1, 2020
- 1
- 0
Error al intentar identificar emmc 186-FBGA o 162-FBGA, Esta correctamente instalado en el adaptador pero aparece un error. Compre UFI Box Version Internacional y hasta ahora estoy probando.
Last edited:
La función IMAGEN DE FÁBRICA en esta nueva versión no carga las particiones para escribir un firmware directo en el emmc, también esta falla está en UFI - Android ToolBox y UFI - eMMC ToolBox
Attachments
-
falla ufi mtk.PNG
Error trying to identify emmc 186-FBGA or 162-FBGA, It is correctly installed in the adapter but an error appears. I bought UFI Box Version International and so far I am testing.
Hello i need some help , i tried to solder isp pinout for oppo f11 pro cph1969 many times but i couldn't succeed now i think maybe track is damaged or emmc is dead because in ufi android i detect only usb mediatek port and in ufi emmc i could not detect the emmc here are the logs Help - oppo F11 pro cph1969 isp pinout damaged
should i remove the emmc off chip and try to flash it ? which isp adapter should i use , i'm new to this sorry i want to save the phone
should i remove the emmc off chip and try to flash it ? which isp adapter should i use , i'm new to this sorry i want to save the phone
Hello,
When i try to select eng rom to flash i her this error message "error 5011 (S_DL_SCAT_INCORRECT_FORMAT)
Pls help me!
When i try to select eng rom to flash i her this error message "error 5011 (S_DL_SCAT_INCORRECT_FORMAT)
Pls help me!
i have purchased new ufi box almost two weeks before, while reading backups UFi Emmc Toolbox error occured:
1st disconnection sound from set & then displaying error & stop after a while..
Already tried replacing both cables, tested 3 different sets, but same error.
plz guide any suggestions..!
1st disconnection sound from set & then displaying error & stop after a while..
Already tried replacing both cables, tested 3 different sets, but same error.
plz guide any suggestions..!
Hi, My Xiaomi Mi 9 has been block on edl model, Could the UFI Dongle open the 9008 port? Thank you!
NOT ALL XIAOMI NOTE 8 PRO CAN BE FLASHED WITH UFI
THERE ARE TWO DIFFERENT MODELS FROM NOTE 8 PRO
ONE : WITH TWO SLOTS SIM CARD EVERY SIM IN SLOT : THIS CAN BE FLASH WITH UFI
OTHER : WITH ONE SLOT SIM CARD , TWO SIM CAN BE INSTALLED IN THE SAME SLOT . THIS CAN NOT FLASH :-(
CAN YOU EXPLAIN THE DIFFERENCE BETWEEN ????
THERE ARE TWO DIFFERENT MODELS FROM NOTE 8 PRO
ONE : WITH TWO SLOTS SIM CARD EVERY SIM IN SLOT : THIS CAN BE FLASH WITH UFI
OTHER : WITH ONE SLOT SIM CARD , TWO SIM CAN BE INSTALLED IN THE SAME SLOT . THIS CAN NOT FLASH :-(
CAN YOU EXPLAIN THE DIFFERENCE BETWEEN ????
dear ufi teams i have lost my credit by failed 8 time please refund my 32 credit
