If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here

idaspy

Junior Member
Jun 26, 2020
2
0
sumatra selatan
please help, I just bought ufi box for about 1 week, the problem is every time I write big data it always fails / I want to read / flash, always fails when big data. please give me the solution, thank you...
16426
 

kpm40m

Active Member
Jan 28, 2020
17
1
I have same problem i tray more than 5 days but no luck many times reinstalled but same
 

kpm40m

Active Member
Jan 28, 2020
17
1
I have same problem i tray more than 5 days but no luck many times reinstalled but same
 

Attachments

  • UFI.png
    UFI.png
    96.2 KB · Views: 16

dimabaltyan1107

Junior Member
Jul 2, 2020
2
0
Балта
Доброго времени суток, помогите разобрать с донглом , при конекте xiaomi mi8 lite выдает ошибку [SERVER] Error: this version of software is outdated, please \synchronize ! , при конекте Redmi 6a выдает ошибку ,
Подключение Bootrom ...
Ошибка [SERVER]: чтобы сохранить мигающие слоты, ваш запрос был временно отклонен из-за предыдущей ошибки.
Пожалуйста, проверьте ваши настройки вспышки, вы можете повторить через 1 час
Нет возврата после третьего раза.
Платформа: MT6765, версия HW: 0xCA00, версия Sw: 0x0000
Ошибка BROM_SCMD_SLA. код 0x7046
(boot_rom.cpp, строка: 1280)
Авторизация загрузчика не удалась.

Кедиты сняло конекта нету (


30-06-2020 21:32 XF01529736373 XIAOMI_FL cactus 2e19f16e6b755b7a .. 3 1 не удалось 3569-PCFSK102C1W1B1], 194.50.51.251
 

bhagat20

Active Member
Dec 3, 2018
51
11

You are still using very old version of ufi tool to install it without errors, but still you are facing error, this shows how pathetic tool this is, I have all boxes n dongles, everything is working smoothly but only this pathetic ufi is not working, on other threads people are mostly asking how to repair phone with particular box, but this pathetic ufi is the only one thread where I see people are asking questions abt why tool is not working, what a pathetic tool these guys have made, so many people have problems but still the product supporters are sleeping, what a pathetic tool
 

obel-x

Member
Dec 4, 2016
14
2
admin
i have 2 problem cannot icloun mi acount from redmi 6 whet connect wifi relocked again and cannot flash meizu m8
 

Attachments

  • 87c89194-4276-4995-807f-02fc10cf2c0c.jpg
    87c89194-4276-4995-807f-02fc10cf2c0c.jpg
    101 KB · Views: 15

dimabaltyan1107

Junior Member
Jul 2, 2020
2
0
Балта
RVER] Ошибка: эта функция может не работать для этой модели, и мы не вернем деньги за эту задачу.
Xiaomi mi8 lite
 

udenkzmbcell

Junior Member
Jun 28, 2020
2
0
bandung
good job UFI team :up:
now Ufi android tool BOX has been fixed on win10 ver 2004
on the last update.
 

Attachments

  • Annotation 2020-07-02 214442.png
    Annotation 2020-07-02 214442.png
    1.2 MB · Views: 20

gsmanees

Active Member
Aug 21, 2019
52
32
INDIA
[SERVER] Sorry, We have run out of all available slots, please try again in 7 hours.
Every time server is busy, How can I flash devices with this UFI???
 
Feb 5, 2020
6
0
after updae ufi ver 1779 userarea part dose not work properly
scroll up down not working
secourity tab note working




any one check this
please help
 

pavlosupruniuk

Junior Member
Dec 6, 2019
3
0
Can you refund my credits?


name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: lotus
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 10 supported eMMC CID:
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HAG4a2 90014A48 41473461 32xxxxxx xxxxxxxx
[Micron] S0J9B7 13014E53 304A3942 37xxxxxx xxxxxxxx
[Samsung] QE63MB 15010051 4536334D 42xxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[SK Hynix] hC8aP 90014A68 43386150 3Exxxxxx xxxxxxxx
[Samsung] 3H6CAB 15010033 48364341 42xxxxxx xxxxxxxx
[Samsung] 3V6CMB 15010033 5636434D 42xxxxxx xxxxxxxx
[SK Hynix] hC8aP 90014A68 43386150 3Exxxxxx xxxxxxxx
[SanDisk] DA4064 45010044 41343036 34xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
BROM version[1]: 7.1945.3.0
DA: MTK_AllInOne_DA[0].bin
hash: 19472e1a8df5a6c65368f77651f293b31d720393, size: 1.01 MiB
version: 3.3001.2019/12/12020/07/05 19:11:01, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM3)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [lotus,5f39507441826757] cost: 0, retry: 3, your balance: 8
Sending Download Agent...
Error: 0xC0010005 (STATUS_PROTOCOL_ERR)
There was a problem communicating with the device, make sure the phone is properly switched off (with the battery connected) before connecting to PC for flashing.
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: 0xC0010005 (STATUS_PROTOCOL_ERR)
There was a problem communicating with the device, make sure the phone is properly switched off (with the battery connected) before connecting to PC for flashing.
(device_instance.cpp, line:139)
%[
You have used 3 out of 10 slot for today.
You have used 2 available XIAOMI_FL slot for this phone, you have 1 FREE slot left to try again in case this task fails.
You are paying for authorization access not the task, there is no refund for failed tasks and tasks with 3 retry
Refunds are only for failed tasks because of server issues, software issues or bugs and unknown problem with no retry !!!
We found that you have used XIAOMI_FL service with this phone before.
Before using another authorization, please make sure you are using the correct firmware.
You can use this FREE slot before Sun, 12 Jul 2020 16:05:50 GMT.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.
%]
An unknown error has occurred, please verify your flash settings, system drivers, USB cable or try different USB port.
Email: pavlosupruniuk[at]gmail.com
Account Id: MTE4NTUxOTA3NQ==
Credit balance: 8
Credits usage log:

storage type: eMMC
storage type: eMMC
name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: lotus
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 10 supported eMMC CID:
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HAG4a2 90014A48 41473461 32xxxxxx xxxxxxxx
[Micron] S0J9B7 13014E53 304A3942 37xxxxxx xxxxxxxx
[Samsung] QE63MB 15010051 4536334D 42xxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[SK Hynix] hC8aP 90014A68 43386150 3Exxxxxx xxxxxxxx
[Samsung] 3H6CAB 15010033 48364341 42xxxxxx xxxxxxxx
[Samsung] 3V6CMB 15010033 5636434D 42xxxxxx xxxxxxxx
[SK Hynix] hC8aP 90014A68 43386150 3Exxxxxx xxxxxxxx
[SanDisk] DA4064 45010044 41343036 34xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
Firmware package: lotus_global_images_V11.0.6.0.OFIMIXM_20200610.0000.00_8.1_global\images
BROM version[1]: 7.1945.3.0
DA: MTK_AllInOne_DA[0].bin
hash: 19472e1a8df5a6c65368f77651f293b31d720393, size: 1.01 MiB
version: 3.3001.2019/12/12020/07/05 19:11:01, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Error: timeout
AUTH info: MTK, version: 1
Firmware package: lotus_global_images_V11.0.6.0.OFIMIXM_20200610.0000.00_8.1_global\images
BROM version[1]: 7.1945.3.0
DA: MTK_AllInOne_DA[0].bin
hash: 19472e1a8df5a6c65368f77651f293b31d720393, size: 1.01 MiB
version: 3.3001.2019/12/12020/07/05 19:11:01, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port (COM3)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] XIAOMI_FL [lotus,5f39507441826757] ref id: XF04415628432, cost: 4, your balance: 4
Sending Download Agent...
Error: 0xC0010005 (STATUS_PROTOCOL_ERR)
There was a problem communicating with the device, make sure the phone is properly switched off (with the battery connected) before connecting to PC for flashing.
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: 0xC0010005 (STATUS_PROTOCOL_ERR)
There was a problem communicating with the device, make sure the phone is properly switched off (with the battery connected) before connecting to PC for flashing.
(device_instance.cpp, line:139)
%[
You have used 4 out of 10 slot for today.
You have used 1 available XIAOMI_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.
You are paying for authorization access not the task, there is no refund for failed tasks and tasks with 3 retry
Refunds are only for failed tasks because of server issues, software issues or bugs and unknown problem with no retry !!!
We found that you have used XIAOMI_FL service with this phone at Sun, 05 Jul 2020 16:05:50 GMT.
Note that due to limited authorization slot, every authorization service will take cost.
Before using another authorization, please make sure the phone have a good working hardware and you are using the correct firmware.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.
%]
An unknown error has occurred, please verify your flash settings, system drivers, USB cable or try different USB port.
Email: pavlosupruniuk[at]gmail.com
Account Id: MTE4NTUxOTA3NQ==
Credit balance: 4
Credits usage log:

storage type: eMMC
storage type: eMMC
 
Top