Infinity Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features

Infinity Box & Dongle

TATAISONA

Friend's Martview
Jul 5, 2019
2,564
4,963
India
Infinity Chinese Miracle-2 SP2/SPD-UniSoc v2.10 - New year means new features !


As ordinary, unique functions and methods released

Core
Changed : FlashCore protocol updated
NewSOC: UniSOC Tiger T61x series support
NewSOC: UniSOC UIS7862 (Car HeadUnits SoC) series support
NewSOC: SC7731E Android 10 / FastProto supported
NewSOC: SC9832E Android 10 / FastProto supported

Flasher
Changed : Protocol updated
Changed : NVM manager updated
Changed : FastFlash protocol updated ( SC7731E, SC9832E supported )

Firmware reader
Changed : Android 10 specific changes
Changed : Initial Tiger and NaT devices support
Changed : UltraRead protocol updated ( SC7731E, SC9832E supported under 0S loaders now )

Service
NewFeature: Security Repair allow change PSN1/PSN2
- In newer devices PSN1/2 damage may lead to bootlop, ota and other issues
- In newer devices PSN1/2 used as bootloader token
Changed : Identify : Correct MEMORY and RAM size reading for Android 10 devices
Changed : Identify : Read PSN1 and PSN1
Changed : Identify : SC9832E and SC7731E can be used to verify eMMC ReadOnly state (0S loader mode)
Changed : Repair : Identify signed devices during repair
Changed : NVM : Read and Write operations revised

UserData
Changed : UserData dump feature updated ( Legacy line fixes )

SPUnlock
Changed : SC9863 support updated
Changed : SC9832 support updated
Changed : PermLock fix ( processed in automatic mode, fix issue with possible PermLock after first unlock try )
NewFeature: Error codes explanation and hints
NewFeature: Damaged devices ( security destroyed ) detection
NewFeature: Damaged devices ( permLock ) detection

Model DB
Changed : New generic loaders included for SC7731E with Android 10 ( 0S type )
Changed : New generic loaders included for SC7792E with Android 10 ( 0S type )
Changed : New generic loaders included for Tiger T61x
Changed : New generic loaders included for UIS7862
Changed : ZTE, Itel and others line loaders updated to support faster operatons amd more HW variants

Other
Changed : GUI settings now stored and load select style, settings and other at next run

Changed : Lot of different changes and fixes


Download link #1

Download link #2

Download link #3


Official Distributors & Resellers


Infinity-Box 16 years updates and support as nobody else since year 2005
 

malik ji

Friend's Martview
Aug 25, 2019
689
286
pakistan
Skype
shani.sajidd
Sonork ID
100.650600
good update...............................................thanks
 

Infinity-Box

Product Supporter
Feb 10, 2019
2,583
544
does it support Micromax Bharat 2 Plus(Q402+) NETWORK UNLOCK ?
phone model can be the same but memory structure may be different even for the same model name.
Tho only way to know result - try and see result.
 

Katan21

Active Member
May 20, 2020
32
7
Managua, Nicaragua
Error read sky platinum J5, spd 7731E.

Operation : Identify [ v2.10 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_2GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0004
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : Control transfered!

Boot Done!


- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:00:47


Operation : Read FW [ v2.10 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!


>>> Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
>>> Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!
 

Katan21

Active Member
May 20, 2020
32
7
Managua, Nicaragua
infinity team, version 2.10 cm2sp2 has a bug in reading at least in spd 7731e it does not identify well therefore it does not read software or perform frp. install version 2.09 all correct. I tested 3 phones I don't know if it happens to other users.


Operation : Identify [ v2.09 ]
BootMode : FLASH

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : SkyDevices
Product Device : Platinum_J5
Product Model : Platinum_J5
Product Name : Platinum_J5
Patch Level : QP1A.190711.020
Display ID : Platinum J5_V02_20200818_1416
Ver. Incmt : 30351
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-08-05
Build Time : 26.08.2020
Product Model : Platinum J5
Product Info : Platinum_J5
Product Board : Platinum_J5
Board Platform : sp7731e
Product Manfct : SkyDevices


Platform Version: MOCORTM_17C_W20.10.2_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W20.10.2
HW Version: sc7731e_modem
CMP_Time : 03-03-2020 01:31:32

MODEM TAG : MOCORTM_17C_W20.10.2_Debug_FM_BASE_17C_W20.10.2_sc7731e_modem_pike2_pub

USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)

- > INFO : Remove cable from device to switch it off!

Done!
Elapsed: 00:02:10

Operation : Read FW [ v2.09 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
>>> ERROR : FDL Start Failed!

>>> Error : Fail to boot FDL!
>>> Unsupported device with selected fdl or settings! Change settings!

Reconnect Power/Cable!

Operation : Read FW [ v2.09 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : SkyDevices
Product Device : Platinum_J5
Product Model : Platinum_J5
Product Name : Platinum_J5
Patch Level : QP1A.190711.020
Display ID : Platinum J5_V02_20200818_1416
Ver. Incmt : 30351
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2020-08-05
Build Time : 26.08.2020
Product Model : Platinum J5
Product Info : Platinum_J5
Product Board : Platinum_J5
Board Platform : sp7731e
Product Manfct : SkyDevices

AndroidVer : 10
VlnrLevel : 0x02

SP7731E__Platinum_J5__10__Platinum_J5_V02_20200818_1416__QP1A.190711.020__Platinum_J5

Read : u-boot.bin
Read : sml.bin
Read : tos.bin
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : dtbo.img
Read : deltanv_w.bin
Read : pm_sys.bin
Read : modem_w.bin
Read : gdsp_w.bin
Read : nvitem_w.bin
Read : modem_wcn.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Make : persist.img
Read : phase.cfg
Read : boot.img
Read : recovery.img
Read : socko.img
ExtSparse : Compression ratio : 28%
Read : odmko.img
ExtSparse : Compression ratio : 2%
Make : userdata.img
Make : cache.img
Read : prodnv.img
ExtSparse : Compression ratio : 26%
Read : super.img
Read : u-boot-spl.bin

Waiting for device ...
ADB : Device found!
ADB : Connected!
ADB : Prepare Ok!
Cookies!
Cookies!
Winter is coming!

Firmware size : 0x7D9945E8 ( 1,96 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!

Done!
Elapsed: 00:17:54
 
Top