Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : 20 MHz
Connecting...
Device : Samsung eMMC 000000
Page size : 512 B
Block size : 512 B
Block count : 1048576
Size : 512.00 MB
---------------------------------------------------------------
CID Info
CID : 150100303030303030562016061354D1
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 000000
Product revision : 5.6
Product serial number : (hex) 20160613
Manufacturing date : 05/2017
---------------------------------------------------------------
CSD Info
CSD : 902701320F5903FFF6DB7FE08A40403B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/000000_02_10_2022_23_23_26.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.4.7; FW: 1.24.
Writing eMMC firmware from file: C:/Program Files/Medusa Pro Software/EMMC_firmwares/KMDH6001DM-B422/KMDH6001DM-B422_FW.bin...Done.
Finalizing...Done.
Write CID error.
Disconnected.
EMMC writing firmware Done.
SW: 2.2.4.7; FW: 1.24.