- Dec 4, 2018
- 60
- 11
eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
Microsoft Windows 7 (32 bit) build 7600 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 3307
EasyJTAG Box Serial = B9F4B57E4EA83AF0
Card Serial = AAF18395
EasyJTAG Box Firmware = 2.44
Changelog:
30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101112.extcsd
EMMC Init completed.
Scanning soft partitions
Partition table not found
Get firmware version
Firmware info not found
eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
Microsoft Windows 7 (32 bit) build 7600 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 3307
EasyJTAG Box Serial = B9F4B57E4EA83AF0
Card Serial = AAF18395
EasyJTAG Box Firmware = 2.44
Changelog:
30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101112.extcsd
EMMC Init completed.
Scanning soft partitions
Partition table not found
Get firmware version
Firmware info not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101158.extcsd
EMMC Init completed.
Operation: Universal Factory Format
Please, wait ...
Successfully
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101213.extcsd
EMMC Init completed.
Operation: Changing GP sizes (final write) ...
GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP2 size: 0 MB , WR_REL: 1 , ENH 0
GP3 size: 0 MB , WR_REL: 1 , ENH 0
GP4 size: 0 MB , WR_REL: 1 , ENH 0
Zero sizes. This may damage your eMMC
Do you want to continue?
HW_PART error. Reason: Card already partitioned
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101348.extcsd
EMMC Init completed.
Opening file: MT6582_Android_scatter.txt
The new format of scatter
config_version: V1.1.1
platform: MT6582
preloader_s5501.bin
Found 4 supported eMMC CID:
name = 'H4G1d' hex = 0x483447316404 [SKHYNIX]
eNAND_H26M31002GPR/4GB @FBGA153
eNAND_H9DP32A4JJBCGR-KEM/4GB @FBGA153
eNAND_H9TP32A4GDBCPR-KGM/4GB @FBGA162
eNAND_H9TP32A8JDACPR-KGM/4GB @FBGA162
name = 'K5U00M' hex = 0x4B355530304D [SAMSUNG]
KMK5U000VM-B309/4GB+LPDDR2 8Gb(x32) @FBGA162
KMK5U000YM-B309/4GB+LPDDR2 6Gb(x32) @FBGA162
name = '004G90' hex = 0x303034473930 [TOSHIBA]
eSD_THGBM5G5A1JBAIR/4GB @FBGA153
eSD_THGBMAG5A1JBAIR/4GB @FBGA153
TYC0FH121597RA/4GB @FBGA153
TYD0FH221618RA/4GB @FBGA162
TYD0FH221618RA-4G @BGA162
name = 'H8G2d' hex = 0x483847326404 [SKHYNIX]
eNAND_H26M42003GMR/8GB @FBGA153
eNAND_H9TP65A8JDACPR-KGM/8GB @FBGA162
eNAND_H9TP65A8JDMCPR-KGM/8GB @FBGA162
eNAND_H9TQ65A8GTMCUR-KTM/8GB @BGA221
The size of the last section has been updated
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101353.extcsd
EMMC Init completed.
Operation: Write by vendor (MediaTek)
Partition name: PRELOADER
Filename: preloader_s5501.bin , Offset: 000000000000 , filesize: 117888 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2364.46 KB/s
Partition name: MBR
Filename: MBR , Offset: 000000C00000 , filesize: 512 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Error writing at address: 000000C00000 , error: 1, 1 Unknown error ... Retry #1
Error writing at address: 000000C00000 , error: 1, 1 Unknown error ... Retry #2
Error writing at address: 000000C00000 , error: 1, 1 Unknown error ... Retry #3
Too many errors. Writing has been stopped
Microsoft Windows 7 (32 bit) build 7600 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 3307
EasyJTAG Box Serial = B9F4B57E4EA83AF0
Card Serial = AAF18395
EasyJTAG Box Firmware = 2.44
Changelog:
30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101112.extcsd
EMMC Init completed.
Scanning soft partitions
Partition table not found
Get firmware version
Firmware info not found
eMMC_tool Suite ver. 1.6.2.0 (release date: 30.06.2019)
Microsoft Windows 7 (32 bit) build 7600 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 3307
EasyJTAG Box Serial = B9F4B57E4EA83AF0
Card Serial = AAF18395
EasyJTAG Box Firmware = 2.44
Changelog:
30.06.2019 (ver 1.6.1.0)
Fix: Bugs that have been found through your crash report
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101112.extcsd
EMMC Init completed.
Scanning soft partitions
Partition table not found
Get firmware version
Firmware info not found
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101158.extcsd
EMMC Init completed.
Operation: Universal Factory Format
Please, wait ...
Successfully
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101213.extcsd
EMMC Init completed.
Operation: Changing GP sizes (final write) ...
GP1 size: 0 MB , WR_REL: 1 , ENH 0
GP2 size: 0 MB , WR_REL: 1 , ENH 0
GP3 size: 0 MB , WR_REL: 1 , ENH 0
GP4 size: 0 MB , WR_REL: 1 , ENH 0
Zero sizes. This may damage your eMMC
Do you want to continue?
HW_PART error. Reason: Card already partitioned
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101348.extcsd
EMMC Init completed.
Opening file: MT6582_Android_scatter.txt
The new format of scatter
config_version: V1.1.1
platform: MT6582
preloader_s5501.bin
Found 4 supported eMMC CID:
name = 'H4G1d' hex = 0x483447316404 [SKHYNIX]
eNAND_H26M31002GPR/4GB @FBGA153
eNAND_H9DP32A4JJBCGR-KEM/4GB @FBGA153
eNAND_H9TP32A4GDBCPR-KGM/4GB @FBGA162
eNAND_H9TP32A8JDACPR-KGM/4GB @FBGA162
name = 'K5U00M' hex = 0x4B355530304D [SAMSUNG]
KMK5U000VM-B309/4GB+LPDDR2 8Gb(x32) @FBGA162
KMK5U000YM-B309/4GB+LPDDR2 6Gb(x32) @FBGA162
name = '004G90' hex = 0x303034473930 [TOSHIBA]
eSD_THGBM5G5A1JBAIR/4GB @FBGA153
eSD_THGBMAG5A1JBAIR/4GB @FBGA153
TYC0FH121597RA/4GB @FBGA153
TYD0FH221618RA/4GB @FBGA162
TYD0FH221618RA-4G @BGA162
name = 'H8G2d' hex = 0x483847326404 [SKHYNIX]
eNAND_H26M42003GMR/8GB @FBGA153
eNAND_H9TP65A8JDACPR-KGM/8GB @FBGA162
eNAND_H9TP65A8JDMCPR-KGM/8GB @FBGA162
eNAND_H9TQ65A8GTMCUR-KTM/8GB @BGA221
The size of the last section has been updated
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
EMMC Device Information :
EMMC CID: 90014A4834473164048607A30FF04153
EMMC CSD: D02701320F5903FFFFFFFFE78A4040E3
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G1d , HEX: 483447316400 , S/N: 07A30FF0 , rev. 0x86
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2014
EMMC ROM 1 (Main User Data) Capacity: 3696 MB (0000E7000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G1d_07A30FF0_20190723_101353.extcsd
EMMC Init completed.
Operation: Write by vendor (MediaTek)
Partition name: PRELOADER
Filename: preloader_s5501.bin , Offset: 000000000000 , filesize: 117888 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2364.46 KB/s
Partition name: MBR
Filename: MBR , Offset: 000000C00000 , filesize: 512 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Error writing at address: 000000C00000 , error: 1, 1 Unknown error ... Retry #1
Error writing at address: 000000C00000 , error: 1, 1 Unknown error ... Retry #2
Error writing at address: 000000C00000 , error: 1, 1 Unknown error ... Retry #3
Too many errors. Writing has been stopped