Solved MOBICEL GLO ,BEAM ,HERO ,RIO SS ,SPD 773XX NETWORK UNLOCK BY FILE .

This topic has been solved

KAEGSM

Active Member
Jun 25, 2019
18
23
Zimbabwe ,Africa
Skype
[email protected]
PayPal:

Donate money to this user
1.Download this firmware File on MEGA
2.Extract the firmware using Winrar or 7zip.
3.Open (Infinity Box CM2) SPD VERSION 1.27.
4.Go to CPU selection and select SP sc77xx [MODEL SELECT] a pop up message will show up just click ok and proceed to the Flash tab click ..PAC and open or locate where the downloaded firmware is .
16488

5.After the firmware is loaded click update NVM and click the flash button.
6. Power off the mobile phone press volume up button and insert micro usb cable .
7.Wait until the flashing process is finished then power on the phone and wait until the phone fully boots into system and you are done no networkn lock.
  1. Go to security section and restore the original imei Note: imei change is ILLEGAL
  2. After successfully restoring/ writting the imei you are good to go
 

zubzero01

Member
Jul 12, 2020
9
0
ZAR
1.Download this firmware File on MEGA
2.Extract the firmware using Winrar or 7zip.
3.Open (Infinity Box CM2) SPD VERSION 1.27.
4.Go to CPU selection and select SP sc77xx [MODEL SELECT] a pop up message will show up just click ok and proceed to the Flash tab click ..PAC and open or locate where the downloaded firmware is .
View attachment 16488

5.After the firmware is loaded click update NVM and click the flash button.
6. Power off the mobile phone press volume up button and insert micro usb cable .
7.Wait until the flashing process is finished then power on the phone and wait until the phone fully boots into system and you are done no networkn lock.
  1. Go to security section and restore the original imei Note: imei change is ILLEGAL
  2. After successfully restoring/ writting the imei you are good to go
hi

any chance that you still have the file available?

thanx
 

cryptonmarcus

Junior Member
Jul 20, 2020
3
2
mitechcorner.blogspot.com
1.Download this firmware File on MEGA
2.Extract the firmware using Winrar or 7zip.
3.Open (Infinity Box CM2) SPD VERSION 1.27.
4.Go to CPU selection and select SP sc77xx [MODEL SELECT] a pop up message will show up just click ok and proceed to the Flash tab click ..PAC and open or locate where the downloaded firmware is .


5.After the firmware is loaded click update NVM and click the flash button.
6. Power off the mobile phone press volume up button and insert micro usb cable .
7.Wait until the flashing process is finished then power on the phone and wait until the phone fully boots into system and you are done no networkn lock.
  1. Go to security section and restore the original imei Note: imei change is ILLEGAL
  2. After successfully restoring/ writting the imei you are good to go
1.Download this firmware File on MEGA
2.Extract the firmware using Winrar or 7zip.
3.Open (Infinity Box CM2) SPD VERSION 1.27.
4.Go to CPU selection and select SP sc77xx [MODEL SELECT] a pop up message will show up just click ok and proceed to the Flash tab click ..PAC and open or locate where the downloaded firmware is .


5.After the firmware is loaded click update NVM and click the flash button.
6. Power off the mobile phone press volume up button and insert micro usb cable .
7.Wait until the flashing process is finished then power on the phone and wait until the phone fully boots into system and you are done no networkn lock.
  1. Go to security section and restore the original imei Note: imei change is ILLEGAL
  2. After successfully restoring/ writting the imei you are good to go
The link you posted no longer works can you repost a working link thanks
 

ayashar

Junior Member
Jul 31, 2020
3
2
zimbabwe
1.Download this firmware File on MEGA
2.Extract the firmware using Winrar or 7zip.
3.Open (Infinity Box CM2) SPD VERSION 1.27.
4.Go to CPU selection and select SP sc77xx [MODEL SELECT] a pop up message will show up just click ok and proceed to the Flash tab click ..PAC and open or locate where the downloaded firmware is .


can i have link to the(Infinity Box CM2) SPD VERSION 1.27. + loader working file . thanks in advance
 
  • Like
Reactions: @saint
Top