Legitunlocks.com
Chia Farm Land

nokia ta 1080 flash done by bmt

S

sadra.z

Active Member
Apr 24, 2017
15
4
iran
nokia ta 1080 nbo file flash done by umt

Edit title


Code: 
Brand    : Nokia
Operation    : Flash Firmware (nb0)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.0.1000.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1600500 [8917] 00000000
OPK_DATA    : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966024663C39A5B06
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8917, eMMC, 8 GB
LU Count    : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [E2M-0-021Q-NON-HLOS.bin] -> [modem]...Done
Writing [E2M-0-021Q-00WW-1-2-emmc_appsboot.mbn] -> [aboot]...Done
Writing [E2M-0-021Q-00WW-1-2-emmc_appsboot.mbn] -> [abootbak]...Done
Writing [E2M-0-021Q-00WW-1-2-boot.img] -> [boot]...Done
Writing [E2M-0-021Q-00WW-1-2-recovery.img] -> [recovery]...Done
Writing [E2M-0-021Q-00WW-1-2-system.img] -> [system]...Done
Writing [E2M-0-021Q-00WW-1-2-vendor.img] -> [vendor]...Done
Writing [E2M-0-021Q-cmnlib_30.mbn] -> [cmnlib]...Done
Writing [E2M-0-021Q-cmnlib_30.mbn] -> [cmnlibbak]...Done
Writing [E2M-0-021Q-cmnlib64_30.mbn] -> [cmnlib64]...Done
Writing [E2M-0-021Q-cmnlib64_30.mbn] -> [cmnlib64bak]...Done
Writing [E2M-0-021Q-keymaster64.mbn] -> [keymaster]...Done
Writing [E2M-0-021Q-keymaster64.mbn] -> [keymasterbak]...Done
Writing [E2M-00WW-022-splash.img] -> [splash]...Done
Writing [E2M-0-021Q-sbl1.mbn] -> [sbl1]...Done
Writing [E2M-0-021Q-sbl1.mbn] -> [sbl1bak]...Done
Writing [E2M-0-021Q-rpm.mbn] -> [rpm]...Done
Writing [E2M-0-021Q-rpm.mbn] -> [rpmbak]...Done
Writing [E2M-0-021Q-tz.mbn] -> [tz]...Done
Writing [E2M-0-021Q-tz.mbn] -> [tzbak]...Done
Writing [E2M-0-021Q-devcfg.mbn] -> [devcfg]...Done
Writing [E2M-0-021Q-devcfg.mbn] -> [devcfgbak]...Done
Writing [E2M-0-021Q-adspso.bin] -> [dsp]...Done
Writing [E2M-0-021Q-NV-default.mbn] -> [default_nv]...Done
Writing [E2M-0-021Q-hwcfg.img] -> [hwcfg]...Done
Writing [E2M-00WW-001-sutinfo.img] -> [sutinfo]...Done
Writing [systeminfo.img] -> [systeminfo]...Done
Writing [E2M-0-021Q-00WW-1-2-hidden.img] -> [hidden]...Done
Writing [E2M-00WW-005-cda.img] -> [cda]...Done
Writing [E2M-0-021Q-00WW-1-2-cache.img] -> [cache]...Done
Writing [E2M-0-021Q-00WW-1-2-mdtp.img] -> [mdtp]...Done
Writing [E2M-0-021Q-gpt_main0.bin] -> [PrimaryGPT]...Done
Writing [E2M-0-021Q-gpt_backup0.bin] -> [BackupGPT]...Done
Applying Patches................Done
Operation Finished.
QcFire Ver. 5.7
 
Last edited:
  • Like
Reactions: Dilan12345 and mojahidul
S

siroartz1

Member
Sep 14, 2017
8
2
nairobi
FLASHING PROCEDURE with UMT QcFire v5.7
***
FIRMWARE LINK
FLASH THIS
847.36 MB file on MEGA

Download Nb0 file
Open UMT QCFire 5.7
Load File
Connect phone in EDL---(TEST POINT)
DRINK some beer & wait FLASHING to Finish
DONE....100000%
By Sireal
:Y::Y::S::G:

sadra.z said:
nokia ta 1080 nbo file flash done by umt

Edit title


Code: 
Brand    : Nokia
Operation    : Flash Firmware (nb0)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.0.1000.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID    : E1600500 [8917] 00000000
OPK_DATA    : A57FDEEB0D02233786D8DDCA8A9889D62F92D43EE56EAC9966024663C39A5B06
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware    : 8917, eMMC, 8 GB
LU Count    : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 65536 [4096], Out: 1048576, Sector Size: 512
Writing [E2M-0-021Q-NON-HLOS.bin] -> [modem]...Done
Writing [E2M-0-021Q-00WW-1-2-emmc_appsboot.mbn] -> [aboot]...Done
Writing [E2M-0-021Q-00WW-1-2-emmc_appsboot.mbn] -> [abootbak]...Done
Writing [E2M-0-021Q-00WW-1-2-boot.img] -> [boot]...Done
Writing [E2M-0-021Q-00WW-1-2-recovery.img] -> [recovery]...Done
Writing [E2M-0-021Q-00WW-1-2-system.img] -> [system]...Done
Writing [E2M-0-021Q-00WW-1-2-vendor.img] -> [vendor]...Done
Writing [E2M-0-021Q-cmnlib_30.mbn] -> [cmnlib]...Done
Writing [E2M-0-021Q-cmnlib_30.mbn] -> [cmnlibbak]...Done
Writing [E2M-0-021Q-cmnlib64_30.mbn] -> [cmnlib64]...Done
Writing [E2M-0-021Q-cmnlib64_30.mbn] -> [cmnlib64bak]...Done
Writing [E2M-0-021Q-keymaster64.mbn] -> [keymaster]...Done
Writing [E2M-0-021Q-keymaster64.mbn] -> [keymasterbak]...Done
Writing [E2M-00WW-022-splash.img] -> [splash]...Done
Writing [E2M-0-021Q-sbl1.mbn] -> [sbl1]...Done
Writing [E2M-0-021Q-sbl1.mbn] -> [sbl1bak]...Done
Writing [E2M-0-021Q-rpm.mbn] -> [rpm]...Done
Writing [E2M-0-021Q-rpm.mbn] -> [rpmbak]...Done
Writing [E2M-0-021Q-tz.mbn] -> [tz]...Done
Writing [E2M-0-021Q-tz.mbn] -> [tzbak]...Done
Writing [E2M-0-021Q-devcfg.mbn] -> [devcfg]...Done
Writing [E2M-0-021Q-devcfg.mbn] -> [devcfgbak]...Done
Writing [E2M-0-021Q-adspso.bin] -> [dsp]...Done
Writing [E2M-0-021Q-NV-default.mbn] -> [default_nv]...Done
Writing [E2M-0-021Q-hwcfg.img] -> [hwcfg]...Done
Writing [E2M-00WW-001-sutinfo.img] -> [sutinfo]...Done
Writing [systeminfo.img] -> [systeminfo]...Done
Writing [E2M-0-021Q-00WW-1-2-hidden.img] -> [hidden]...Done
Writing [E2M-00WW-005-cda.img] -> [cda]...Done
Writing [E2M-0-021Q-00WW-1-2-cache.img] -> [cache]...Done
Writing [E2M-0-021Q-00WW-1-2-mdtp.img] -> [mdtp]...Done
Writing [E2M-0-021Q-gpt_main0.bin] -> [PrimaryGPT]...Done
Writing [E2M-0-021Q-gpt_backup0.bin] -> [BackupGPT]...Done
Applying Patches................Done
Operation Finished.
QcFire Ver. 5.7
Click to expand...
 
  • Haha
Reactions: alamgir2020
D

duboy

Junior Member
Jan 29, 2020
1
0
I have done the process with several firmwares and it doesn't work for me, it just turns on the logo when I connect it to the pc without battery. Any idea
 
You must log in or register to reply here.
Top