oppo A1k Dead after formate .

[zunair]

hi today oppo A1k just formate after formate set dead write csd partion file but not on
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-5041
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x48CED803
Manufacturing date: Jan 2019
CID: 15010051 4436334D 420348CE D8031624
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6762_18540, name: CPH1923
brand: OPPO, model: CPH1923 (OPPO A1k)
build model list: CPH1923 (OPPO A1k)
build id: PPR1.180610.011, version: 9 Pie (CPH1923EX_11_A.22)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190825.174201 release-keys

Internal storage: 16 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G

 

[Deepesh Sharma]

write factory file with opf extract then flash with emmc tool

Or in case of other problem follow this video
Oppo eMMC Damage eMMC Erased eMMC Reprogram Dead Boot Repair

 

[recan21]

give error :

Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QD63MB_464BD8E0_20191111_165257.extcsd
EMMC Init completed.

Operation: Write by vendor (MediaTek)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 000747BFBE00
GPT-partitioning done

Partition name: preloader
Filename: preloader_oppo6762_18540.bin , Offset: 000000000000 , filesize: 248096 bytes
eMMC switching to ROM3
Erasing partition...
Writing partition...
Done writing partition. Write speed: 174,58 KB/s
Partition name: preloader
Filename: preloader_oppo6762_18540.bin , Offset: 000000000000 , filesize: 248096 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 174,61 KB/s
Partition name: recovery
Filename: recovery.img , Offset: 000000108000 , filesize: 33554432 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Error writing at address: 000000308000 , error: -8, DATA SND CRC Error(Small ROM Size, maybe) ... Retry #1
Done writing partition. Write speed: 467,99 KB/s
Partition name: opporeserve2
Filename: opporeserve2.img , Offset: 000002988000 , filesize: 5300372 bytes
eMMC switching to ROM1
Erasing partition...
Error erasing at address: 0000065C8000 , error: -1, CMD Timeout Error ... Retry #1
Error erasing at address: 0000065C8000 , error: -1, CMD Timeout Error ... Retry #2
Error erasing at address: 0000065C8000 , error: -1, CMD Timeout Error ... Retry #3
Too many errors. Erasing has been stopped

 

[recan21]

i have unpacked latest firmware :
CPH1923_11_A.22_190825_fa6f5268.ofp

 

[.::THE ROCK::.]

i have unpacked latest firmware :
CPH1923_11_A.22_190825_fa6f5268.ofp

Post link this ver with unpacked file

 

[recan21]

Redirect - FirmwareX.Net

 

[recan21]

to unpack it you need easyjtag emmc tool

 

[.::THE ROCK::.]

to unpack it you need easyjtag emmc tool

bro i have EasyJTAG Classic box or used_ EasyJtag Classic suit ver_v3.6.1.17

i unable ti find easyjtag emmc tool link oppo file to unpack can share link download

 

[Abdullah]

Oppo a1k dead after resetting MTK port only dead boot repair Ufi Box
1st: just clean your phone's PCB CLK, CMD, DAT0 Points
2nd: Write ext.csd file

it will be done 100%

 

[ppyousuf]

can we flash a1k online?

 

[Kamran4g5]

ext_csd boot partition config file write through ae tools

 

[Kamran4g5]

ext_csd boot partition config file write through ae tools how?

 

[Tunganasreenu]

rmx 1825 dump plase