oppo a3s cph1853
- Thread starter HM REMON BABU
- Start date
Mohd Saqib
Friend's Martview
1st Problem Hang on logo After reset by Jtag
2nd Dead Durning Flash
And I write Dump..
Sent From TA-1021 Using Martview Forum App
2nd Dead Durning Flash
And I write Dump..
Sent From TA-1021 Using Martview Forum App
Mohd Saqib
Friend's Martview
(Oppo Qualcomm ) If Device Dead During Flashing or unlock By ISP .. No Need To Write Dump
Just Flash Latest Firmware With Auth ......
Now Do Flash Latest Firmware With Official MSM Tool .
Just Flash Latest Firmware With Auth ......
Now Do Flash Latest Firmware With Official MSM Tool .
gsm armaan
Active Member
- Jun 8, 2019
- 29
- 7
- Sonork ID
- 0
Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-4650
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x08D254A8
Manufacturing date: Dec 2018
CID: 90014A48 41473461 32A508D2 54A8C558
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Selected: [HYNIX] H9TQ17ABJTACUR ID90/16GB (BGA221)
Interface: UFI High-Speed
Serial number: 0011-8841-4650
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x08D254A8
Manufacturing date: Dec 2018
CID: 90014A48 41473461 32A508D2 54A8C558
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
Selected: [HYNIX] H9TQ17ABJTACUR ID90/16GB (BGA221)