Oppo A5 After Format Phone Dead Please Help me

[imeicodes]

Oppo A5 After Format Phone Dead Please Help me

I follow Every Single Step Please Check And Tell Me where is Did Mistake Thanks In Advance


Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9119
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 2.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RD64MB (0x524436344d42), rev: 0x01, serial number: 0x8DCA070A
Manufacturing date: Jan 2018
CID: 15010052 4436344D 42018DCA 070A1578
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Factory Reset...
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 13/16384 inodes and 2091/65536 blocks
Writing cache... Wrote 50410951 blocks, expected to write 65536 blocks
Done
Creating filesystem with parameters:
Size: 25438433280
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 6210555
Block groups: 190
Reserved block group size: 1024
Created filesystem with 11/1553440 inodes and 141538/6210555 blocks
Writing userdata... Unknown chunk type 0x0000 at 0x00E0B0C4
Wrote 50411462 blocks, expected to write 6210555 blocks
Done
Done
Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9119
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 2.8 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RD64MB (0x524436344d42), rev: 0x01, serial number: 0x8DCA070A
Manufacturing date: Jan 2018
CID: 15010052 4436344D 42018DCA 070A1578
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Detected: SAMSUNG moviNAND KMRD60004M-BXXX/32G
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1809
brand: OPPO, model: CPH1809 (R11s)
build model list: CPH1829 (CPH1829)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1809EX_11_A.23)
build description: S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190624.211613 release-keys
Internal storage: 23.69 GiB
Custom moviNAND command is not supported for this device(MMC51).
Connection status: IUSB3HUB:USB 2.00 High-Speed

__
Factory Reset LOG:

Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9119
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RD64MB (0x524436344d42), rev: 0x01, serial number: 0x8DCA070A
Manufacturing date: Jan 2018
CID: 15010052 4436344D 42018DCA 070A1578
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Factory Reset...
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 13/16384 inodes and 2091/65536 blocks
Writing cache... Done
Creating filesystem with parameters:
Size: 25438433280
Block size: 4096
Blocks per group: 32768
Inodes per group: 8176
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 6210555
Block groups: 190
Reserved block group size: 1024
Created filesystem with 11/1553440 inodes and 141538/6210555 blocks
Writing userdata... Done
Done

__


FRP Reset LOG:

Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9119
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RD64MB (0x524436344d42), rev: 0x01, serial number: 0x8DCA070A
Manufacturing date: Jan 2018
CID: 15010052 4436344D 42018DCA 070A1578
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Clear FRP Lock... Done

 

[imeicodes]

61 views no one reply still waiting for help

 

[masti213]

most oppo changed boot config mtk to qlcm after format. do read info and check its boot config

 

[imeicodes]

most oppo changed boot config mtk to qlcm after format. do read info and check its boot config

Thanks for reply please explain me bit more if boot config change then what's the next step thanks

 

[imeicodes]

current result still phone connecting with ufi box but not power on i again format but same Result Dead

any one please give me solution or dump i new user

Connection status: IUSB3HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9119
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 2.8 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RD64MB (0x524436344d42), rev: 0x01, serial number: 0x8DCA070A
Manufacturing date: Jan 2018
CID: 15010052 4436344D 42018DCA 070A1578
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1809
brand: OPPO, model: CPH1809 (R11s)
build model list: CPH1829 (CPH1829)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1809EX_11_A.23)
build description: S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20190624.211613 release-keys

Internal storage: 23.69 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMRD60004M-BXXX/32G

 

[cellbhai]

Attention to IMEICODES ,CHK CLK resistance and replace or short the resistance,then chk sir

 

[imeicodes]

Attention to IMEICODES ,CHK CLK resistance and replace or short the resistance,then chk sir

Thanks For Reply I Checked Both Resistance Ok .. Not Shortage But Phone Still Same Dead No Power

 

[cellbhai]

Thanks For Reply I Checked Both Resistance Ok .. Not Shortage But Phone Still Same Dead No Power

Thanks For Reply I Checked Both Resistance Ok .. Not Shortage But Phone Still Same Dead No Power

Dear friend remove clk resistance and short the two points