Oppo A5s dead after Factory Resat with ufi

karan02 · Jul 26, 2019

oppo a5s dead after factory resat with ufi
am try to remove clk and take jumper but phone not boot
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0657
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0xCB90AA9D
Manufacturing date: Feb 2019
CID: 15010051 4436334D 4203CB90 AA9D2696
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: CPH1909, name: CPH1909
brand: OPPO, model: CPH1909(OPPO A5s)
build id: O11019, version: 8.1.0 Oreo (CPH1909EX_11_A.20)
build description: full_oppo6765_18511-user 8.1.0 O11019 1554009363 release-keys

Internal storage: 22.40 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G

Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible

mabaitamama2019 · Jul 27, 2019

wasim alfiya said:
Bro u r
Partition configuration: 0x00

Plz writer Ext Csd backup ur phone 1st backup ander waise sam phone copy backup and write
Wasim alfiya

its true

Forum Supporter · Jul 27, 2019

karan02 said:
oppo a5s dead after factory resat with ufi
am try to remove clk and take jumper but phone not boot
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0657
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0xCB90AA9D
Manufacturing date: Feb 2019
CID: 15010051 4436334D 4203CB90 AA9D2696
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: CPH1909, name: CPH1909
brand: OPPO, model: CPH1909(OPPO A5s)
build id: O11019, version: 8.1.0 Oreo (CPH1909EX_11_A.20)
build description: full_oppo6765_18511-user 8.1.0 O11019 1554009363 release-keys

Internal storage: 22.40 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G

Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible

please always post image for help
we are believe only image or video

Kaziiliyas · Nov 14, 2019

karan02 said:
oppo a5s dead after factory resat with ufi
am try to remove clk and take jumper but phone not boot
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0657
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0xCB90AA9D
Manufacturing date: Feb 2019
CID: 15010051 4436334D 4203CB90 AA9D2696
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x00
No boot acknowledge is sent (default)
Device is not boot-enabled (default)
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: CPH1909, name: CPH1909
brand: OPPO, model: CPH1909(OPPO A5s)
build id: O11019, version: 8.1.0 Oreo (CPH1909EX_11_A.20)
build description: full_oppo6765_18511-user 8.1.0 O11019 1554009363 release-keys

Internal storage: 22.40 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G

Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible

JUST

wasim alfiya said:
Bro u r
Partition configuration: 0x00

Plz writer Ext Csd backup ur phone 1st backup ander waise sam phone copy backup and write
Wasim alfiya

BHAI A5S DUMP NEED

GSM-HUNTER · Nov 14, 2019

use mrt not ufi

bharatsingh121 · Jan 2, 2020

oppo a5s 2divice dead after factory reset sir please solution

Stephenpuk · Feb 19, 2020

mabaitamama2019 said:
its true

And how about the CLK resistor

=-rebel-= · Feb 19, 2020

its only 1 click for mrt..no need to open... volume up and down button to boot..the safest way..

Stephenpuk · Feb 19, 2020

CLK resistor damaged is it will work if i do jumper

Stephenpuk · Jul 3, 2020

Anyone Please Provide Oppo A5s ext CSD file

Altamashsodha · Jul 3, 2020

Stephenpuk said:
Anyone Please Provide Oppo A5s ext CSD file

here is oppo a5s dump CPH1909(CPH1909EX_11_A.21-8.1.0-O11019)[KMRH60014A-B614_172D6832].rar write only extsd file

clearvanz · Jan 27, 2022

mine is here after remove password dead on mediatek detect on pc no display

Connection status: XHCI:HUB3:HUB3[#4]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-4126
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hB8aP (0x68423861503e), rev: 0x03, serial number: 0x66904EB3
Manufacturing date: May 2019
CID: 90014A68 42386150 3E036690 4EB356DE
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
Device version: 0x420E
Firmware version: 0x36303030
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Secure Feature support: 0x55
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: CPH1909, name: CPH1909
brand: OPPO, model: CPH1909 (OPPO A5s)
build id: O11019, version: 8.1.0 [Oreo] (CPH1909EX_11_A.46)
build description: full_oppo6765_18511-user 8.1.0 O11019 1616154336 release-keys

crypto state: encrypted?
eMMC selected: [HYNIX] H9TQ27ADFTMCUR/32GB (BGA221)

KhalIman · Jan 27, 2022

clearvanz said:
mine is here after remove password dead on mediatek detect on pc no display

Connection status: XHCI:HUB3:HUB3[#4]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-4126
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hB8aP (0x68423861503e), rev: 0x03, serial number: 0x66904EB3
Manufacturing date: May 2019
CID: 90014A68 42386150 3E036690 4EB356DE
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
Device version: 0x420E
Firmware version: 0x36303030
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Secure Feature support: 0x55
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: OPPO
board: CPH1909, name: CPH1909
brand: OPPO, model: CPH1909 (OPPO A5s)
build id: O11019, version: 8.1.0 [Oreo] (CPH1909EX_11_A.46)
build description: full_oppo6765_18511-user 8.1.0 O11019 1616154336 release-keys

crypto state: encrypted?
eMMC selected: [HYNIX] H9TQ27ADFTMCUR/32GB (BGA221)

Remove wires and check if phone Powers on. phone still in mediateck mode as still as connected to ufi adapter.

Search

Search

Oppo A5s dead after Factory Resat with ufi

karan02

Member

mabaitamama2019

Active Member

Forum Supporter

Friend's Martview

Kaziiliyas

Member

GSM-HUNTER

Member

bharatsingh121

Junior Member

Stephenpuk

Member

=-rebel-=

Stephenpuk

Member

Stephenpuk

Member

Altamashsodha

Active Member

clearvanz

Active Member

KhalIman

Friend's Martview