Oppo Realme 3 Pro rmx1851 + F7 Cph1821 Bga 254 Failed to initialize eMMC Plz Help

gsmjahid

Active Member
Jun 14, 2019
21
7
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-7287
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for OLD moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---
Check your connection, make sure eMMC inserted properly.
 

Attachments

The Small Prince

No Life Poster
Aug 16, 2019
106
71
INDIA
Skype
Aftab_Ansari7899
PayPal
paytm_donation_9792648446
Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-7287
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for OLD moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---
Check your connection, make sure eMMC inserted properly.
Try 1 more
VCC-3.8
VCCQ-2.8
Bus-1
It's work redmi note 7
EMMC Type BGA-254