Post Here Successfully Unlocked/calculated/flashed/repaired Phones Via Nck Dongle

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung I8552 Read FF Fone

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) HYNIX 0x2058494e5948
 EMMC FW VERSION: 16:00:00:00:00:00:00:00
 EMMC CID: 90014A2058494E5948 : 00000000000000
 EMMC UA SIZE: 0xe7000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: B12_ARA_VersionV1.3_2.2QI
 Display ID: JZO54K.I8552XXAMG1
 Version: 4.2.2
 Build Date: 2015年 11月 12日 星期四 14:47:35 CST
 Model: GT-I8552
 Brand: samsung
 Device: lenovo72_we_lca
 Manufacturer: samsung
 Region: US
 Mediatek Version Release: ALPS.JB3.MP.V1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0xc00000       
 Start processing MBR
 Reading:  BEGIN: 0xc00000         - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0xc80000         - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0xd00000         - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 357091054606874
 IMEI[2] from NVRAM: 357092054606872
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1500000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x1f00000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3580000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x4340000        - LEN: 0x25800000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_samsung_GT-I8552_4_2_2_ALPS_JB3_MP_V1(2018_10_22_15_52)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X1 Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: Wed Jun 28 21:12:23 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741101155571
 IMEI[2] from NVRAM: 354741101155589
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_10_21_21_36)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Huawei CHM-U01 Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x4b3758564d42
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 1501004B3758564D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: CHM-U01
 Display ID: CHM-U01 V100R001C185B120
 Version: 4.4.2
 Build Date: Thu Aug 27 11:31:46 CST 2015
 Model: CHM-U01
 Brand: Huawei
 Device: CHM-U01
 Manufacturer: HUAWEI
 Region: US
 Mediatek Version Release: ALPS.KK1.MP1.V2.11
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x1400000       
 Start processing MBR
 Reading:  BEGIN: 0x1400000        - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x1480000        - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 869096029759154
 IMEI[2] from NVRAM: 869096029759162
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x5180000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x6500000        - LEN: 0x64000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6582_EMMC_Huawei_CHM-U01_4_4_2_ALPS_KK1_MP1_V2_11(2018_10_22_16_21)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Alcatel 4034f FRP Remove Done

Code:
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected model: ELBRUS
 Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) SAMSUNG 0x464e31324d42
 EMMC FW VERSION: 06:00:00:00:00:00:00:00
 EMMC CID: 150100464E31324D42 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2880000      [7.290 GB]
 -Reading GPT Drive OK
 Checking data, wait...
 
 Erasing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G7102 Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+8192Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 86:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe7000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe7600000       [3.615 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: JDQ39
 Display ID: ALPS.JB5.MP.V1.27
 Version: 4.4.2
 Build Date: 2015年 03月 10日 星期二 19:12:20 CST
 Model: SM-G7102
 Brand: Samsung
 Device: SM-G7102
 Manufacturer: Samsung
 Region: US
 Mediatek Version Release: ALPS.JB5.MP.V1.27
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x1400000       
 Start processing MBR
 Reading:  BEGIN: 0x1400000        - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x1480000        - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000       
 Start processing nvram
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3d80000        - LEN: 0x600000       
 Start processing LOGO ......
 Start processing EBR2
 Reading:  BEGIN: 0x4700000        - LEN: 0x200           
 Start processing system
 Reading:  BEGIN: 0x5180000        - LEN: 0x4bc00000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6582_EMMC_Samsung_SM-G7102_4_4_2_ALPS_JB5_MP_V1_27(2018_10_28_15_03)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X1 Write FF Done

Code:
 Flash files count is :5
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X1 Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: LMY47I test-keys
 Version: 5.1
 Build Date: Thu Jun 22 15:55:33 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 357523021514752
 IMEI[2] from NVRAM: 357523021514751
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_11_14_18_48)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X3 Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: Z6U190HFB_YT_V008En
 Version: 5.1
 Build Date: Fri Sep  1 01:13:59 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741101087691
 IMEI[2] from NVRAM: 354741101087709
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_11_14_20_09)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X1 Write FF Done

Code:
 Flash files count is :8
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM81)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM210)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X2 Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: Z6U190HFB_YT_V008En
 Version: 5.1
 Build Date: Fri Sep  1 01:13:59 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741101097955
 IMEI[2] from NVRAM: 354741101097963
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\maanarman\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_11_15_22_47)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G530h Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
 EMMC FW VERSION: 58:00:00:00:00:00:00:00
 EMMC CID: 7001004D4D43303447 : 00000000000000
 EMMC UA SIZE: 0xe6800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe6c20000       [3.606 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM145)
 Build ID: KOT49H
 Display ID: S538FW_MIPICAM_SM_DZ_4.4_V1.1
 Version: 4.4.2
 Build Date: 2016年 04月 06日 星期三 20:28:19 CST
 Model: SM-G530H
 Brand: Samsung
 Device: SM-G530H
 Manufacturer: Samsung
 Region: US
 Mediatek Version Release: S538FW_MIPICAM_SM_DZ_4.4_V1.1
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing PRELOADER ......
 Reading:  BEGIN: 0x0              - LEN: 0x1400000       
 Start processing MBR
 Reading:  BEGIN: 0x1400000        - LEN: 0x200           
 Start processing EBR1
 Reading:  BEGIN: 0x1480000        - LEN: 0x200           
 Start processing proinfo
 Reading:  BEGIN: 0x1500000        - LEN: 0x300000       
 Start processing nvram
 Start processing PROTECT_F
 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000       
 Start processing PROTECT_S
 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000       
 Start processing UBOOT ......
 Start processing BOOTIMG
 Start processing RECOVERY
 Start processing secro
 Reading:  BEGIN: 0x3d80000        - LEN: 0x40000         
 Start processing LOGO ......
 Start processing system
 Reading:  BEGIN: 0x4b40000        - LEN: 0x38400000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6572_EMMC_Samsung_SM-G530H_4_4_2_S538FW_MIPICAM_SM_DZ_4_4_V1_1(2018_11_03_14_18)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X1 Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: Z6U190HF_YT_V006En
 Version: 5.1
 Build Date: Wed Jul 19 11:37:34 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741101155571
 IMEI[2] from NVRAM: 354741101155589
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\maanarman\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_10_30_20_20)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung J700h Write FF Done

Code:
 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+8192Mb) HYNIX 0x483447316404
 EMMC FW VERSION: 05:00:00:00:00:00:00:00
 EMMC CID: 90014A483447316404 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X1 Write FF Done

Code:
 Flash files count is :7
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM17)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM731)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oppo A37f Remove Locks/FRP Done

Code:
Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Factory Format
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM13) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.68 GB  Partitions count: 38
[0164639F]Userdata Size: 11.14 GB
Manufacturer: OPPO
Cpu: arm64-v8a
Build Id: LMY47V
Model: A37f
Android Release: 5.1.1
Android Version: A37fEX_11_171008
Config: diag,serial_smd,rmnet_bam,adb
Security patch: 2017-09-01
Resetting cache , wait
Total blocks 10
Resetting userdata , wait
Total blocks 119
Factory reset done, wait untill phone start
This can take up to 5 min on slow phones.
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_userdata_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F18.txt
Total Time: 00:00:29
Done.
Code:
Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM13) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14.68 GB  Partitions count: 38
[0164639F]Userdata Size: 11.14 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_frp_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F14.txt
Total Time: 00:00:03
Done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Oale X1 Read FF Done

Code:
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6580
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (57Gb+8192Mb) UNKNOWN_EMMC_DEVICE
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: F40122426977696E20 : 00000000000000
 EMMC UA SIZE: 0x1cd000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1cdc00000      [7.215 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 -Reading GPT Drive OK
 Build ID: LMY47I
 Display ID: Z6U190HF_YT_V006En
 Version: 5.1
 Build Date: Wed Jul 19 11:37:34 CST 2017
 Model: gxq6580_weg_l
 Brand: alps
 Device: gxq6580_weg_l
 Manufacturer: alps
 Region: US
 Mediatek Version Release: ALPS.L1.MP6.V2_GXQ6580.WEG.L_P69
 Dumping Preloader.
 Start dumping flash, this can take up to 1 hour.......
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 354741100739714
 IMEI[2] from NVRAM: 354741100739722
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing frp ......
 Reading:  BEGIN: 0x4fa0000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x50a0000        - LEN: 0x2000000       
 Start processing secro
 Reading:  BEGIN: 0x9a00000        - LEN: 0x600000       
 Start processing system
 Reading:  BEGIN: 0xa800000        - LEN: 0x60000000     
 Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6580_EMMC_alps_gxq6580_weg_l_5_1_ALPS_L1_MP6_V2_GXQ6580_WEG_L_P69(2018_11_25_20_49)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile A290 write FF Done

Code:
Flash files count is :11
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6572
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
 EMMC FW VERSION: 01:00:00:00:00:00:00:00
 EMMC CID: 90014A483447326111 : 00000000000000
 EMMC UA SIZE: 0xe9000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9c00000       [3.652 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader backup already exist, skip saving.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile Z10 Read FF Done

Code:
 Start processing proinfo
 Reading:  BEGIN: 0x80000          - LEN: 0x300000       
 Start processing nvram
 IMEI[1] from NVRAM: 355471070311711
 IMEI[2] from NVRAM: 355471075311716
 Start processing protect1 ......
 Reading:  BEGIN: 0x880000         - LEN: 0xa00000       
 Start processing protect2 ......
 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000       
 Start processing lk ......
 Start processing boot
 Start processing recovery
 Start processing logo ......
 Start processing secro
 Reading:  BEGIN: 0x5200000        - LEN: 0x600000       
 Start processing trustzone
 Start processing frp ......
 Reading:  BEGIN: 0x6a00000        - LEN: 0x100000       
 Start processing nvdata ......
 Reading:  BEGIN: 0x6b00000        - LEN: 0x2000000       
 Start processing system
 Reading:  BEGIN: 0xb000000        - LEN: 0xc0000000     
 Saved to : C:\Users\maanarman\Desktop\TEMP\Android_MTK\firmware_backup\MT6753_EMMC_QMobile_QMobile Z10_5_1_ALPS_L1_MP3_V2_21_6753_65U_G_P35(2018_11_25_19_26)
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Qmobile Z10 Write FF Done

Code:
 Flash files count is :12
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 2.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6753
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 3 GB  DRAM
 ----------------------------------------------------
 EMMC: (117Gb+24576Mb) HYNIX 0x484147326505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A484147326505 : 00000000000000
 EMMC UA SIZE: 0x3ab800000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3ac400000      [14.691 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Huawei Y360 U61 Write FF Done

Code:
 Flash files count is :8
 Action : Firmware update.
 Selected Model: 0-By CPU: ELBRUS
 Exe version: NCKDongle AndroidMTK 2.5.8.9
 Scenario: [0]Safe Flash
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM24)
 Boot mode: Preloader
 Using Algo 1.
 Scatter file loaded, not need emmi.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+4096Mb) SANDISK 0x53454d303447
 EMMC FW VERSION: 40:00:00:00:00:00:00:00
 EMMC CID: 45010053454D303447 : 00000000000000
 EMMC UA SIZE: 0xec000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec600000       [3.693 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM132)
 Warning, flashing preloader disabled!
 If you change android version, preloader must be flashed.
 Flash EMMC Algo Start.
 Preloader saved in firmware directory.
 Starting flash.
 Download firmware to flash now...
 Wait untill phone will start charging.
 All done.
 
Top