techno_world

Active Member
Aug 20, 2019
16
2
I have one relame c2 RMX 1945 Dead after format , i have write EXT csd file but still same

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1126
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xAF17D2AD
Manufacturing date: Jun 2019
CID: 15010051 4536334D 4203AF17 D2AD6684
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name: RMX1941
brand: Realme, model: RMX1941
build model list: RMX1941
build id: PPR1.180610.011, version: 9 Pie (RMX1941EX_11_B.15)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190819.114304 release-keys

Internal storage: 9.08 GiB
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)

please help master
 
Reactions: gsmsuave

ilyasrao

Active Member
Nov 15, 2016
38
28
it seems evry thing is ok

always remove all wires from isp adopter before power on
try to short CLK
 
Reactions: gsmsuave

reliableshop

Friend's Martview
Sep 15, 2017
57
10
Nepal
Skype
sushil.lama2
first check ur phone storage 16 or 32 gb and u can put ext csd file of rmx 1941
ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name: RMX1941
brand: Realme, model: RMX1941
build model list: RMX1941
build id: PPR1.180610.011, version: 9 Pie (RMX1941EX_11_B.15)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190819.114304 release-keys

Internal storage: 9.08 GiB
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)
 

reliableshop

Friend's Martview
Sep 15, 2017
57
10
Nepal
Skype
sushil.lama2
file here rmx 1941 16 gb
Serial number: 0011-8840-9637
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x1C2207FC
Manufacturing date: May 2019
CID: 15010051 4536334D 42031C22 07FC5672
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)

Current partition access:
Access to boot partition 2
Loading file: "\\D:\Boot%20Repair%20file\realme%20c2\realme-c2-16gb-(SSM)ufibox-dump\boot2.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Failed to write block 0x00030000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0xD00, card status: 0x0, card state: 6 (Card is receiving operation information)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!
 

reliableshop

Friend's Martview
Sep 15, 2017
57
10
Nepal
Skype
sushil.lama2
write only ext csd
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)

Loading file: "\\D:\Boot%20Repair%20file\realme%20c2\realme-c2-16gb-(SSM)ufibox-dump\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done
New EXT CSD info:
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Boot area write protection: 0x00

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name: RMX1941
brand: Realme, model: RMX1941
build id: PPR1.180610.011, version: 9 Pie (RMX1941EX_11_B.15)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190819.114304 release-keys
 

afsar777

Junior Member
Jan 20, 2019
2
0
I have one relame c2 RMX 1945 Dead after format , i have write EXT csd file but still same

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-1126
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xAF17D2AD
Manufacturing date: Jun 2019
CID: 15010051 4536334D 4203AF17 D2AD6684
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name: RMX1941
brand: Realme, model: RMX1941
build model list: RMX1941
build id: PPR1.180610.011, version: 9 Pie (RMX1941EX_11_B.15)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190819.114304 release-keys

Internal storage: 9.08 GiB
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)

please help master
 

BAPI12

Friend's Martview
Jul 3, 2019
54
5
not solved
not solved
CH
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)

Loading file: "\\D:\Boot%20Repair%20file\realme%20c2\realme-c2-16gb-(SSM)ufibox-dump\ext_csd.bin", size: 512 bytes...
Writing extcsd, 512 bytes... Done
New EXT CSD info:
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Partitioning support: 0x07
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Boot area write protection: 0x00

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name: RMX1941
brand: Realme, model: RMX1941
build id: PPR1.180610.011, version: 9 Pie (RMX1941EX_11_B.15)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190819.114304 release-keys
ANYDESK HE
 

reliableshop

Friend's Martview
Sep 15, 2017
57
10
Nepal
Skype
sushil.lama2
Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-9637
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x1C2207FC
Manufacturing date: May 2019
CID: 15010051 4536334D 42031C22 07FC5672
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: arm64-v8a
manufacturer: Realme
board: RM6762_18540, name: RMX1941
brand: Realme, model: RMX1941
build model list: RMX1941
build id: PPR1.180610.011, version: 9 Pie (RMX1941EX_11_B.15)
build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20190819.114304 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)