World First Repair Boot Huawei P30 Lite (MAR-LXA1) without Box Jtag

perata

Friend's Martview
Dec 21, 2016
1,810
1,502
morocco



• Repair Boot Huawei P30 Lite (MAR-LXA1) By Chimera Tool + EFT Pro without Box Jtag •


16927








• The phone was dead as a result of Downgrade work to remove FRP

• As is well known, the phone carries a hisi710 processor and such problems are solved only by jtag box

• But with the recent update to the chimera team, you can solve the problem without Box Jtag


  • No fastboot mode
  • No Upgrade Mode
  • No USB COM 1.0
• The phone responds only with a test point (USB COM 1.0 )


:> Test Point <:

16934


• First, we make a connection to a test point

• We open the chimera, choose the model, and press Flash Factory Fastboot








Code:
Chimera Mobile Phone Utility version: 25.26.1633 @ 2020-07-05
Printing phone history

Flash Factory Fastboot
2020-07-05
00:58:49

Flash Factory Fastboot
2020-07-05
00:54:58

Flashing factory fastboot
Rebooting phone to factory mode
Uploading data
Uploading data
Uploading data
Uploading data
Rebooting the device in Fastboot mode...
Waiting for Fastboot device to appear...
We counld't identify the device, please select manually, if present!
Selected device: PORT 2: L2N4C19726008272
Phone detected.
Checking if factory challenge needed...
Checking if the factory challenge-response succeed...
The phone will remain in fastboot mode until rebooting. If your phone was bricked and you would like to repair it, you should try using repair recovery as the next step.
Finished at local time: [07.05.20 09:07:20]






• After this process the phone will go android adb interface into mode but with a black screen






• Do not disconnect the phone from the computer

• We open EFT and flash the phone in FastBoot mode







Code:
Checking fastboot device.....OK
Reading info.....OK
Device Serial: L2N4C19726008272
Device IMEI:
Device IMEI2:
Device Firmware: :Error: /preas/xxx not found in /product/hw_oem/MAR-L21A/par
Device FB Lock: UNLOCKED
Device USER Lock: LOCKED
Preparing.....OK
Writing partition info table.....OK
Flashing [XLOADER].....OK
Flashing [FASTBOOT].....OK
Flashing [HHEE].....OK
Flashing [DTS].....OK
Flashing [TRUSTFIRMWARE].....OK
Flashing [FW_LPM3].....OK
Flashing [DTO].....OK
Flashing [KERNEL].....OK
Flashing [TEEOS].....OK
Flashing [ISP_FIRMWARE].....OK
Flashing [VECTOR].....OK
Flashing [SENSORHUB].....OK
Flashing [FW_HIFI].....OK
Flashing [VBMETA].....OK
Flashing [MODEMNVM_UPDATE].....OK
Flashing [MODEMNVM_CUST].....OK
Flashing [RECOVERY_RAMDISK].....OK
Flashing [RECOVERY_VENDOR].....OK
Flashing [RECOVERY_VBMETA].....OK
Flashing [PREAS].....OK
Flashing [PREAVS].....OK
Flashing [ERECOVERY_KERNEL].....OK
Flashing [ERECOVERY_RAMDISK].....OK
Flashing [ERECOVERY_VENDOR].....OK
Flashing [ERECOVERY_VBMETA].....OK
Flashing [ENG_VENDOR].....OK
Flashing [ENG_SYSTEM].....OK
Flashing [CACHE].....OK
Flashing [SYSTEM].....OK
Flashing [CUST].....OK
Flashing [MODEM_FW].....OK
Flashing [HISEE_IMG].....OK
Flashing [HISEE_FS].....OK
Flashing [VENDOR].....OK
Flashing [ODM].....OK
Flashing [PRODUCT].....OK
Flashing [PATCH].....OK
Flashing [USERDATA].....OK
Flashing [VERSION].....OK
Flashing [PRELOAD].....OK
Flashing [CUST_VERLIST].....Failed
Flashing [CUST_VER].....Failed
Flashing [PTABLE_CUST].....Failed
Flashing [VERSION].....OK
Rebooting device.....OK
Operation {Flash APP Firmware} ID: A93C19BAED4F3215
Elapsed time 11:48 -- Version 3.1.2



• Then the phone will normally go to FastBoot mode



• After that, you may face some problems, such as rebooting the phone or a white screen, re-flash the phone in FastBoot + upgrade mode with a new flash issue and the problem will be solved








Code:
Checking fastboot device.....OK
Reading info.....OK
Device Firmware: :Error: /preas/xxx not found in /product/hw_oem/MAR-L21A/par
Device FB Lock: LOCKED
Device USER Lock: LOCKED
Checking needed files.....OK
Writing image 1.....OK
Writing image 2.....OK
Writing image 3.....OK
Switching to upgrade mode.....1OK
Waiting for Upgrade Mode port.....OK
Connecting to device.....OK
Start processing file [C:/Users/Mus/Desktop/Huawei P30 Lite ( Dual ) MAR-LX1A MAR-L21 hw eea HLRCF Marie-L21A 9.1.0.275(C431E6R2P3) Firmware EMUI9.1.0 05015SJV [androidhost.ru]_2/Software/dload/UPDATE.APP] 4,43 GB:
Firmware version: Marie-LGRP2-OVS 9.1.0.270
Flashing [sha256rsa.img].....OK
Flashing [crc.img].....OK
Flashing [base_verlist.img].....OK
Flashing [base_ver.img].....OK
Flashing [package_type.img].....OK
Flashing [hisiufs_gpt.img].....OK
Flashing [xloader.img].....OK
Flashing [fastboot.img].....OK
Flashing [hhee.img].....OK
Flashing [dts.img].....OK
Flashing [trustfirmware.img].....OK
Flashing [fw_lpm3.img].....OK
Flashing [dto.img].....OK
Flashing [kernel.img].....OK
Flashing [teeos.img].....OK
Flashing [isp_firmware.img].....OK
Flashing [vector.img].....OK
Flashing [sensorhub.img].....OK
Flashing [fw_hifi.img].....OK
Flashing [vbmeta.img].....OK
Flashing [modemnvm_update.img].....OK
Flashing [modemnvm_cust.img].....OK
Flashing [recovery_ramdisk.img].....OK
Flashing [recovery_vendor.img].....OK
Flashing [recovery_vbmeta.img].....OK
Flashing [preas.img].....OK
Flashing [preavs.img].....OK
Flashing [erecovery_kernel.img].....OK
Flashing [erecovery_ramdisk.img].....OK
Flashing [erecovery_vendor.img].....OK
Flashing [erecovery_vbmeta.img].....OK
Flashing [eng_vendor.img].....OK
Flashing [eng_system.img].....OK
Flashing [cache.img].....OK
Flashing [system.img].....OK
Flashing [cust.img].....OK
Flashing [modem_fw.img].....OK
Flashing [hisee_img.img].....OK
Flashing [hisee_fs.img].....OK
Flashing [vendor.img].....OK
Flashing [odm.img].....OK
Flashing [product.img].....OK
Flashing [patch.img].....OK
Flashing [userdata.img].....OK
Flashing [version.img].....OK
Flashing [preload.img].....OK

Start processing file [C:/Users/Mus/Desktop/Huawei P30 Lite ( Dual ) MAR-LX1A MAR-L21 hw eea HLRCF Marie-L21A 9.1.0.275(C431E6R2P3) Firmware EMUI9.1.0 05015SJV [androidhost.ru]_2/Software/dload/MAR-L21A_hw_eea/Nouveau dossier/UPDATE.APP] 254 MB:
Flashing [sha256rsa.img].....OK
Flashing [crc.img].....OK
Flashing [preload_verlist.img].....OK
Flashing [preload_ver.img].....OK
Flashing [package_type.img].....OK
Flashing [ptable_preload.img].....OK
Flashing [preload.img].....OK
Rebooting device.....OK
Operation {Flash APP Firmware} ID: D82931D6561F4DA4
Elapsed time 21:34 -- Version 3.1.2

 

Franky38

Product Supporter
Jul 28, 2018
1,853
2,176
PayPal:

Donate money to this user
good work. you save me!!
i need test point STK-L22DV (Huawei Y9 prime S)
 
  • Like
Reactions: hameeeeeed

Franky38

Product Supporter
Jul 28, 2018
1,853
2,176
PayPal:

Donate money to this user
if i'm not EFT PRO? MRT is possible?
Good sir, but could you explain in detail the problem you have, the more information you give in the first post, the less you have to wait for someone to answer or ask this question.
 
  • Like
Reactions: phucnho

THIQA-PHONE

Junior Member
Jun 17, 2020
2
0
algeria
hello, sir, I have eft pro dongle but I don't have chimera dongle any solution about p30 lite mar-lx1m dead boot
thank you and have a good day
 

WeHere97

Active Member
May 18, 2020
19
5
South Africa
Hello brother , great work ..
I have this problem with Huawei P30 lite (MAR-LX1M) of which I load factory using chimera and the phone didn't respond for almost 4 hours and I ended up cancelling the process because chimera get stucked at 0% .. When I resinsert the cable to pc the phone can be detected but chimera can't and still it is showing black screen .. Your help will be useful ✊✊
 

perata

Friend's Martview
Dec 21, 2016
1,810
1,502
morocco
Hello brother , great work ..
I have this problem with Huawei P30 lite (MAR-LX1M) of which I load factory using chimera and the phone didn't respond for almost 4 hours and I ended up cancelling the process because chimera get stucked at 0% .. When I resinsert the cable to pc the phone can be detected but chimera can't and still it is showing black screen .. Your help will be useful ✊✊
hi
After the repair process on Chimera, the phone will work with a black screen. Do not disconnect it from the computer and flash it in FastBoot mode
Upload a picture of the problem
 
  • Like
Reactions: WeHere97

WeHere97

Active Member
May 18, 2020
19
5
South Africa
Hello , I tried with the given test point but computer (chimera) can't detect the phone .. I tried to reinstall the drivers and change USB cables but still nothing is happening .. Maybe am missing something
 

perata

Friend's Martview
Dec 21, 2016
1,810
1,502
morocco
Hello , I tried with the given test point but computer (chimera) can't detect the phone .. I tried to reinstall the drivers and change USB cables but still nothing is happening .. Maybe am missing something
Does the computer feel the phone when connected to the Test Point?
 
  • Like
Reactions: WeHere97

WeHere97

Active Member
May 18, 2020
19
5
South Africa
I wanted to remove frp using chimera then I accidentally click on load fastboot option in chimera then chimera sent files to the phone successfully and the phone shows updated option and went off after some seconds then chimera stuck on 0% over 40 mins then I ended up cancelling coz the phone wasn't responding​
 

perata

Friend's Martview
Dec 21, 2016
1,810
1,502
morocco
I wanted to remove frp using chimera then I accidentally click on load fastboot option in chimera then chimera sent files to the phone successfully and the phone shows updated option and went off after some seconds then chimera stuck on 0% over 40 mins then I ended up cancelling coz the phone wasn't responding​
If the phone does not respond with the computer, then there is no solution except with Box Jtag
 
  • Like
Reactions: nivram23
Top