Replacement of eMMC Tutorial Via UFI Box ?

Ouch samnang

Friend's Martview
Oct 27, 2018
124
131
Skype
ouch.limeng
Hi all i have samsung G532G emmc damaged. and i want Replace emmc from other phone . how to know emmc correct .
thank u first
 
  • Like
Reactions: Ganesh dayal

bhupenderbanga

Product Supporter
Sep 25, 2018
123
219
Here is the tutorial of eMMC replacement in the tutorial we have Meizu M2 it may help you to change eMMC of any device via UFI BOX

We have the case Meizu M2 (M88) hang on the logo, try to flash again, but failed with the description as shown in the picture.

The visible area of eMMC Nand is not healthy, so we continue processing via eMCP replacement using UFI eMMC ToolBox.

Set up an eMCP replacement with UFI eMMC ToolBox
We using new eMCP Chip Samsung KMR310001M-B611 (16/2)
Remember to always "Identify eMMC" first before any other operation

1. "Factory Reset" eMCP
For eMMC Samsung with Ext_CSD rev. below 1.8, it will erase Nand Area, and reset configuration setting eMMC to the original state.




2. Checking "NAND Test"
We Added read & write sector 0 before a random test in other areas.
It should be more precise to check quickly Nand area





3. Load Firmware in Factory Image
Let's see the List of supported eMCP by preloader for this Device.
Incidentally, eMCP replacement CID was not in the list.
Copy eMCP CID which is in preloader support firmware, and write CID to eMCP Replacement.








4. eMCP CID now Changed
For MediaTek Devices, you don't need to always manually set up the configuration of eMCP.
As long as CID eMCP supported by preloader, eMCP config will auto set during Flashing Procedure.
Let installed eMCP replacement to the board without any config.


It's Flashing time using UFI Android ToolBox
5. Before Flashing Meizu devices, make sure the PC is connected to the Internet Connection.

Check Server Status, Make sure SERVER AUX one, or both ONLINE.
About Server Status :
- MAIN = Registration, Activation Server
- SUPPORT = Data File Download Server
- AUX = Auxiliary Server



6. Then select the correct Brand, Platform, Model, and Firmware.
Always Remember this. Different Brand, Model, and Platform have their own Special Task.

Wait for the device to turn on, long enough, prepare a cup of coffee while waiting ;-)

7.Repair IMEI via AT-mode
After the Device is fully ON, enable USB Debugging, Dial *#*#3646633 #*#,*enable ATCI to write Imei.
Select port, write Original Imei via Checklist AT Mode.


Congratulations, Meizu M2 eMMC replacement done with a new method via UFI Box.
 

Jane1

Friend's Martview
Nov 23, 2018
165
14
Is it necessary to use UFI Android ToolBox when flashing ( see step 5)? UFI box itself can not do that?
 

waqas_ali6012003

Friend's Martview
Nov 17, 2018
159
103
Sonork ID
100.1675677
Is it necessary to use UFI Android ToolBox when flashing ( see step 5)? UFI box itself can not do that?

yes it it becuse UFI EMMC is doing only boot config and wrting boot ETC ,, after wrtie those things u can use Sp flash tool even ,,
 

farooqsoftware

Junior Member
Dec 11, 2020
2
0
karachi
How do you find the correct and compatible Emmc chip for any given device qualcomm base, and where to get them? please guade ufi team thanks
 

jit kumar maharjan

Active Member
Aug 13, 2020
19
4
Nepal,Kathmandu
i have j210f set dead with emmc erase error but shows every android info ok ..no factory reset and erase emmc success also .so decide to change emmc with the same board and number, and change the emmc also and try to write emmc cid with old one cid .ufi box shows write success but again check it shows
only the replaced emmc cid not the changed cid number.what's the problem?
 
Top