Restore samsung GT-N5100 need support

sandro123

Member
Nov 16, 2018
6
0
please help me for this problem:

First step, after connect in ISP mode and identify EMMC press:
"factory reset" >>> done
2° step
"erase" >>>done
3° step
after donwload from UFIBOX support the emmc dump, write
ext_csd, boot1, boot2, userarea >>>done

results after read again emmc:
4572

disconnect all, and reasseble device, power on and still to logo:
4573
and sho this detail:
4574

try reflash whit Odin3_v3.13.1 but failed, show "repartion error" and stop.
4575
Any idea and tips? i'm really newbye in this universe, thank you for all.
Sandro
 

Jeremmi

Active Member
Aug 3, 2018
49
50
Russia
Sonork ID
0
please help me for this problem:

First step, after connect in ISP mode and identify EMMC press:
"factory reset" >>> done
2° step
"erase" >>>done
3° step
after donwload from UFIBOX support the emmc dump, write
ext_csd, boot1, boot2, userarea >>>done

results after read again emmc:
View attachment 4572

disconnect all, and reasseble device, power on and still to logo:
View attachment 4573
and sho this detail:
View attachment 4574

try reflash whit Odin3_v3.13.1 but failed, show "repartion error" and stop.
View attachment 4575
Any idea and tips? i'm really newbye in this universe, thank you for all.
Sandro
Ufi Emmc toolbox often writes bad firmware markup on vendor, use dump with support.
To avoid an error with rpmb, update the emmc firmware, then the rpmb block will be empty.
Good luck.
 

sandro123

Member
Nov 16, 2018
6
0
Ufi Emmc toolbox often writes bad firmware markup on vendor, use dump with support.
To avoid an error with rpmb, update the emmc firmware, then the rpmb block will be empty.
Good luck.
Thank you for reply.
Already write the dump from support area (ext_csd, boot1,boot2, userarea)
problem is no have firmware for update the emmc firmware?
in the ffu folder find only klmag2ge2a-a001.ffu, my EMMC is klmag2ge2a-a002, what to do?
 

Jeremmi

Active Member
Aug 3, 2018
49
50
Russia
Sonork ID
0
Thank you for reply.
Already write the dump from support area (ext_csd, boot1,boot2, userarea)
problem is no have firmware for update the emmc firmware?
in the ffu folder find only klmag2ge2a-a001.ffu, my EMMC is klmag2ge2a-a002, what to do?
try to update as klmag2ge2a-a001, it will not be worse, the problem is still in emmc.
 

Madgoeslim

Super Moderator
Aug 6, 2018
73
151
Indonesia
please help me for this problem:

First step, after connect in ISP mode and identify EMMC
press:
"factory reset" >>> done
2° step
"erase" >>>done
3° step
after donwload from UFIBOX support the emmc dump, write
ext_csd, boot1, boot2, userarea >>>done
Hello,
You have done the emmc procedure well, but there are some steps that I need to correct.
Before performing the repair procedure, in this case it relates to emmc,
as long as the condition of the device is still in the Hang Logo condition
means bootloader area is good too,
after successfully performing iSP, the correct step is do backup (read at least 512MB of user area),
so you don't have to fix Imei after succeeding restoring your backup.
After you have a backup, you can do the factory erase procedure or what is needed for the repair procedure.


After seeing the log post above, as Mr.Jeremmy said, it looks like the eMMC is already not healthy,
so you can try to replace the chip with new one.
 

sandro123

Member
Nov 16, 2018
6
0
Hello,
You have done the emmc procedure well, but there are some steps that I need to correct.
Before performing the repair procedure, in this case it relates to emmc,
as long as the condition of the device is still in the Hang Logo condition
means bootloader area is good too,
after successfully performing iSP, the correct step is do backup (read at least 512MB of user area),
so you don't have to fix Imei after succeeding restoring your backup.
After you have a backup, you can do the factory erase procedure or what is needed for the repair procedure.


After seeing the log post above, as Mr.Jeremmy said, it looks like the eMMC is already not healthy,
so you can try to replace the chip with new one.
Thanks,
from experience whit notebook bios, before erase, backup this:
4611
But whit tihs firmware the tablet is complete dead, and 99% no official ROM.
 

sandro123

Member
Nov 16, 2018
6
0
UPDATE:
after Emmc firmware update whit A001, results (after rewrite all) is this:
4643
and now?
normal boot the tablet still to logo...
many thanks for support