Samsung G532G Dead Repair With Medusa Pro

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Logs

Code:
Welcome to Medusa Pro Software version 1.6.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Brand     : Samsung
Model     : SM-G532G
SRF       : D:/JTAG/g532g/SAMSUNG_SM-G532G_EMMC.SRF
Voltage   : 1.8V
Bus Mode  : 1 bit
Bus speed : Auto

Connecting...
Device       : Hynix eMMC H8G4u
Page size    : 512 B
Block size   : 512 B
Block count  : 15269888
Size         : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID                   : 90014A4838473475920135E5588B744F
Manufacturer ID       : 0X90
Device/BGA            : BGA (Discrete embedded)
OEM/Application ID    : 0X4A
Product name          : H8G4u
Product revision      : 0.1
Product serial number : (hex) 35E5588B
Manufacturing date    : 07/2017
---------------------------------------------------------------
CSD Info

CSD                   : D02701320F5903FFFFFFFFE78A40002B
CSD structure         : CSD version No. 1.2
SPEC version          : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
                        4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed            : 26 MHz
READ block length     : 512 Bytes
WP group enable       : YES
PERM_WRITE_PROTECT    : NO
TMP_WRITE_PROTECT     : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size      : 512 Kbytes
Boot1 size            : 4096 Kbytes
Boot2 size            : 4096 Kbytes
RPMB size             : 4096 Kbytes

Partition config      : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK              : Boot acknowledge sent during boot operation Bit

Boot bus conditions   : (0x00) 00000000
Boot bus width        : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions   : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode             : Use single data rate + backward compatible timings in boot operation (default)

RST_n function        : (0x01) RST_n signal is permanently enabled

Partitioning support  : Device supports partitioning features
Enhanced attribute    : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute  : 0x0
Part setting completed: 0x0
GP partition 1 size   : 0 b
GP partition 2 size   : 0 b
GP partition 3 size   : 0 b
GP partition 4 size   : 0 b
Enhanced area size    : (0x0) 0 b
Enhanced area start   : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files (x86)/LaunchBarCommander/EXT_CSD Backups/H8G4u_07_01_2019_18_22_11.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT              (00000000, 00002000)    4 MB
P01: BOTA0            (00002000, 00002000)    4 MB
P02: nvram            (00004000, 00004000)    8 MB
P03: lk               (00008000, 00001000)    2048 KB
P04: BOTA1            (00009000, 00001000)    2048 KB
P05: secro            (0000A000, 00003800)    7 MB
P06: seccfg           (0000D800, 00000400)    512 KB
P07: efuse            (0000DC00, 00000400)    512 KB
P08: tee1             (0000E000, 00003000)    6 MB
P09: BOTA2            (00011000, 00003000)    6 MB
P10: EFS              (00014000, 00004000)    8 MB
P11: nvdata           (00018000, 00010000)    32 MB
P12: PARAM            (00028000, 00004000)    8 MB
P13: recovery         (0002C000, 00008000)    16 MB
P14: boot             (00034000, 00008000)    16 MB
P15: md1img           (0003C000, 00010000)    32 MB
P16: md1dsp           (0004C000, 00002000)    4 MB
P17: keystore         (0004E000, 00004000)    8 MB
P18: omekeystore      (00052000, 00001C00)    3584 KB
P19: proinfo          (00053C00, 00001400)    2560 KB
P20: para             (00055000, 00000400)    512 KB
P21: PERSISTENT       (00055400, 00000400)    512 KB
P22: STEADY           (00055800, 00000800)    1024 KB
P23: protect1         (00056000, 00004000)    8 MB
P24: protect2         (0005A000, 00004000)    8 MB
P25: RESERVE2         (0005E000, 00002000)    4 MB
P26: system           (00060000, 00604000)    3080 MB
P27: cache            (00664000, 000C8000)    400 MB
P28: hidden           (0072C000, 0001E000)    60 MB
P29: userdata         (0074A000, 00744000)    3720 MB
Repairing from file "D:/JTAG/g532g/SAMSUNG_SM-G532G_EMMC.SRF".
Write data verification is enabled.

Switched to boot area partition 1.
Writing BOOT1 partition...    Done.

Switched to user area.
Writing GPT partition...    Done.
Writing bota0 partition...    Done.
Writing lk partition...    Done.
Writing bota1 partition...    Done.
Writing secro partition...    Done.
Writing seccfg partition...    Done.
Writing efuse partition...    Done.
Writing tee1 partition...    Done.
Writing bota2 partition...    Done.
Writing efs partition...    Done.
Writing param partition...    Done.
Writing recovery partition...    Done.
Writing boot partition...    Done.
Writing md1img partition...    Done.
Writing md1dsp partition...    Done.
Writing keystore partition...    Done.
Writing omekeystore partition...    Done.
Writing proinfo partition...    Done.
Writing para partition...    Done.
Writing persistent partition...    Done.
Writing steady partition...    Done.

Smart Repair is successfully complete.
SW: 1.6.7; FW: 1.24.
Disconnected.
 
Top