Samsung G925P FRP Remove With Octopus

maanarman

Staff member
Super Moderator
Dec 1, 2016
2,899
328
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Logs

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SC-01F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SM-G925P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G925P
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.