Search Results
Web results
samsung a310f A3 2016 frp via octoplus uart cable in 3min
Welcome to Octoplus Box Samsung software version 2.9.3
Card S/N : 01037B73
Please, select firmware file first!
Selected firmware file: A310FXXU3BQC2
_sBoot_for_ResetFRP_EMMC.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-A310F into Download Mode, You have to perform the
following steps:
- Press and hold "Volume-" + "Home" + "Power ON" keys.
- When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing Firmware Failed
Performed by 2.9.3 Software version.
Please put the phone into Download Mode and connect USB cable.
To put SM-A310F into Download Mode, You have to perform the
following steps:
- Press and hold "Volume-" + "Home" + "Power ON" keys.
- When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Firmware writing successfully completed.
Performed by 2.9.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A310F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM9
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM9
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.9.3 Software version.