TECNO SPARK 7 INFO DONE!
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : PR651
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
Device info :
Product Brand : TECNO
Product Device : PR651
Product Model : TECNO PR651
Product Name : PR651
Patch Level : RP1A.201005.001
Display ID : PR651-F6317-11.0-OP-V043-20210729
Ver. Incmt : OP-V043-20210729
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-07-05
Build Time : 29.07.2021
Product Name : F6317
Product Device : TECNO-PR651
Product Info : PR651
Product Board : PR651
Board Platform : sp9863a
Product Manfct : TECNO
NVMng : SecurityInfo
IMEI[1] : XXXXXXXXXXXXX
IMEI[2] : XXXXXXXXXXXXX
IMEI[3] : XXXXXXXXXXXXX
SEC : SLS:0, SKS:0, SKV:4
Platform Version: MOCORTM_20A_W21.15.3_P5_Debug
Project Version: sharkl3_pub
BASE Version: 4G_MODEM_20A_W21.15.3_P5
HW Version: sc9863A_modem
CMP_Time : 05-11-2021 10:59:41
MODEM TAG : MOCORTM_20A_W21.15.3_P5_Debug_4G_MODEM_20A_W21.15.3_P5_sc9863A_modem_sharkl3_pub
USERDATA : FILESYSTEM : F2FS with FBE ( File-Base Encryption )
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:52
FORMAT DONE!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : TECNO : PR651
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:21
THANKS YOU CM2