Update UFI Box NEW UPDATE V1.7.0.2661 Release | Big Update | RPMB Key Program | Many More

aftab_ansari5287 · Nov 30, 2022

Code:

UFI Software version 1.7.0.2661

[HEADING=3]eMMC ToolBox changes:[/HEADING]
Requires UFIBOX with firmware version 1.15

ADD: RPMB read/write/provisioning support
BUGFIX: Minor bugfixes and improvements

[HEADING=3]UFS ToolBox changes:[/HEADING]
Requires UFI UFS-PROG with firmware version 1.37

ADD: RPMB read/write/provisioning support
ADD: Special Task implemented
BUGFIX: Fixed known Read/Write/Erase bugs
BUGFIX: Minor bugfixes and improvements

[HEADING=3]Android ToolBox changes:[/HEADING]
ADD: [MediaTek] Introduced Custom (DA) loader
      Custom loader will enables the following features:
       - RPMB read/write support
       - Lock/Unlock Bootloader and so on
ADD: Bypass Security and Custom loader option
BUGFIX: Minor bugfixes and improvements

MobileClinick1 · Dec 1, 2022

Hi Dear UFI Box Users New Setup Complate To Download Install And Use . :G:

New Setup Download Link : UFI_v1.7.0.2661_setup

adnan_sabir831 · Dec 1, 2022

i use Dongle

No UFIdevice detected
Please connect UFI BOX to usb port

After update

solution plz

adnan_sabir831 · Dec 1, 2022

No UFIdevice detected
Please connect UFI BOX to usb port

After update

solution plz

aftab_ansari5287 · Dec 1, 2022

adnan_sabir831 said:
No UFIdevice detected
Please connect UFI BOX to usb port

After update

solution plz View attachment 50032

Update driver

adnan_sabir831 · Dec 1, 2022

aftab_ansari5287 said:
Update driver

i did

but same

adnan_sabir831 · Dec 1, 2022

In old version

All ok

but when updated then

issue

tranha · Dec 1, 2022

UFI Dongle NEW UPDATE ?

.::Greed::. · Dec 1, 2022

New Setup Download Link ( Google drive ) :- link

rehansayyad · Dec 1, 2022

Please login to view image

like z3x easy jtag

sameera · Dec 1, 2022

adnan_sabir831 said:
i did

but same

use orignal drivers
downoad here

ariszona · Dec 3, 2022

Always error like this... Step
- Identify eMMC
- RPMB Key Preset
- Choose Oppo A3S, REALME C2

- Special Task
- Program RPMB Key (RPMB Provisioning)
Where is wrong ..?

After that, there's always an error like that

Please login to view image

jommil · Dec 10, 2022

New update rpmb partition cannot read.

Robtech · Dec 13, 2022

Am not happy at all with this update cause it's false. The read write Rpmb function not working.
Just like the ufs prog that can not with any UFS device in ISP mode.

cucipiring · Dec 13, 2022

jommil said:
New update rpmb partition cannot read.

working good here

Code:

Connection status: XHCI:HUB3[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-4440
 Boot version: 1.03, FW version: 1.15 (Nov  8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x15 (Samsung)
 Product name: RH64AB (0x524836344142), rev: 0x05, serial number: 0xE2EE68D7
 Manufacturing date: Jan 2019
CID: 15010052 48363441 4205E2EE 68D716A6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x15
EXT_CSD revision: 1.8 (MMC v5.1) 
Partition info:
 Boot1: 4 MiB
 Boot2: 4 MiB
 RPMB: 4 MiB [Provisioned, counter: 1203011]
 User area: 58.24 GiB(62,537,072,640 bytes)
Reading extcsd, size: 512 bytes...
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\ext_csd.bin" (CRC32: 0x130F3DB1) 
Current partition access: 
 Access to boot partition 1
Reading boot1, size: 4 MiB... Done in 1.523 s
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\boot1.bin" (CRC32: 0x1147406A) 
 Blank checking: blank
Current partition access: 
 Access to boot partition 2
Reading boot2, size: 4 MiB... Done in 1.524 s
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\boot2.bin" (CRC32: 0xF17B5F1C) 
 Blank checking: NOT blank
Current partition access: 
 Access to replay-protected memory block (RPMB)
Reading rpmb, size: 4 MiB... Done in 8.340 s
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\rpmb.bin" (CRC32: 0x1851F1F2) 
 Blank checking: NOT blank
Current partition access: 
 Access to user area
Reading userarea, size: 128 MiB...  Done in 49.010 s
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\userarea_128MiB.bin" (CRC32: 0xBBADF786) 
 Blank checking: NOT blank
------------

Realme 2

Code:

Connection status: XHCI:HUB3[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-4440
 Boot version: 1.03, FW version: 1.15 (Nov  8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
 Card/BGA: BGA (Discrete embedded) - High density MMC
 Manufacturer ID: 0x90 (SK Hynix)
 Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x690969CD
 Manufacturing date: Aug 2018
CID: 90014A48 43473861 34A26909 69CD85B0
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
Device version: 0x4305
Firmware version: 0xA2
EXT_CSD revision: 1.8 (MMC v5.1) 
Partition info:
 Boot1: 4 MiB
 Boot2: 4 MiB
 RPMB: 4 MiB [Provisioned, counter: 169341]
 User area: 58.24 GiB(62,537,072,640 bytes)
Current partition access: 
 Access to replay-protected memory block (RPMB)
Reading rpmb, size: 4 MiB... Done in 8.226 s
File saved to "\\%BACKUPS%\Other\HCG8a4_690969CD\rpmb.bin" (CRC32: 0xC517CC9F) 
 Blank checking: NOT blank

jommil · Dec 16, 2022

cucipiring said:

working good here

Code:

Connection status: XHCI:HUB3[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-4440
Boot version: 1.03, FW version: 1.15 (Nov  8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RH64AB (0x524836344142), rev: 0x05, serial number: 0xE2EE68D7
Manufacturing date: Jan 2019
CID: 15010052 48363441 4205E2EE 68D716A6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x15
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 1203011]
User area: 58.24 GiB(62,537,072,640 bytes)
Reading extcsd, size: 512 bytes...
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\ext_csd.bin" (CRC32: 0x130F3DB1)
Current partition access:
Access to boot partition 1
Reading boot1, size: 4 MiB... Done in 1.523 s
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\boot1.bin" (CRC32: 0x1147406A)
Blank checking: blank
Current partition access:
Access to boot partition 2
Reading boot2, size: 4 MiB... Done in 1.524 s
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\boot2.bin" (CRC32: 0xF17B5F1C)
Blank checking: NOT blank
Current partition access:
Access to replay-protected memory block (RPMB)
Reading rpmb, size: 4 MiB... Done in 8.340 s
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\rpmb.bin" (CRC32: 0x1851F1F2)
Blank checking: NOT blank
Current partition access:
Access to user area
Reading userarea, size: 128 MiB...  Done in 49.010 s
File saved to "\\%BACKUPS%\OPPO\CPH1901(CPH1901EX_11_A.22-8.1.0-OPM1.171019.026)[KMRH60014A-B614_E2EE68D7]\userarea_128MiB.bin" (CRC32: 0xBBADF786)
Blank checking: NOT blank
------------

Realme 2

Code:

Connection status: XHCI:HUB3[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8081-4440
Boot version: 1.03, FW version: 1.15 (Nov  8 2022 18:51:23)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 2.8 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x690969CD
Manufacturing date: Aug 2018
CID: 90014A48 43473861 34A26909 69CD85B0
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
Device version: 0x4305
Firmware version: 0xA2
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 169341]
User area: 58.24 GiB(62,537,072,640 bytes)
Current partition access:
Access to replay-protected memory block (RPMB)
Reading rpmb, size: 4 MiB... Done in 8.226 s
File saved to "\\%BACKUPS%\Other\HCG8a4_690969CD\rpmb.bin" (CRC32: 0xC517CC9F)
Blank checking: NOT blank

Now its working..i forgot to update the firmware and synchronize..

lalitkansal · Dec 22, 2022

Ufi box rpmb provisioned fack counter not real counter

danmallam · Feb 20, 2023

There ufi box team we need update about Samsung Qualcomm kg lock and USB flashing in boot mode

danmallam · Feb 20, 2023

Please login to view image

We wanted to Flash this types of phone with ufi box

mohsen456 · Jun 16, 2023

The next update you provide؟؟؟؟؟؟؟
At least make the part of UFI - Android ToolBox eternal sooner

Update UFI Box NEW UPDATE V1.7.0.2661 Release | Big Update | RPMB Key Program | Many More

Member

Active Member

Active Member

Attachments

Active Member

Active Member

Active Member

UFI Dongle NEW UPDATE ?​

Friend's Martview

Active Member

Active Member

Junior Member

Active Member

Active Member

Active Member

Active Member

Member

Junior Member

Junior Member

Attachments

Member

UFI Dongle NEW UPDATE ?