Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 MHz
eMMC Init returned = 0
EMMC Device Information :
EMMC CID: 150100464E31324D4200C20AC41C111D
EMMC CSD: D02701320F5903FFF6DBFFEF92404009
EMMC Manufacture : SAMSUNG , EMMC NAME: FN12MB , HEX: 464E31324D42 , S/N: C20AC41C , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 1/2014
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: FN12MB_C20AC41C_20191103_182940.extcsd
EMMC Init completed.
Operation: Write by vendor (MediaTek)
Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0003A3DFBE00
GPT-partitioning done
Partition name: preloader
Filename: preloader_ztexa6735m_35u_m.bin , Offset: 000000000000 , filesize: 120032 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2206.41 KB/s
Partition name: lk
Filename: lk.bin , Offset: 000001C80000 , filesize: 368840 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 10014.35 KB/s
Partition name: boot
Filename: boot.img , Offset: 000001D80000 , filesize: 8421376 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 11467.77 KB/s
Partition name: recovery
Filename: recovery.img , Offset: 000002D80000 , filesize: 9224192 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 22023.59 KB/s
Partition name: logo
Filename: logo.bin , Offset: 000003D80000 , filesize: 424258 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 13848.71 KB/s
Partition name: secro
Filename: secro.img , Offset: 000005280000 , filesize: 135168 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 7912.05 KB/s
Partition name: tee1
Filename: tz1.img , Offset: 000006080000 , filesize: 60416 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3227.21 KB/s
Partition name: tee2
Filename: tz2.img , Offset: 000006580000 , filesize: 60416 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 11132.01 KB/s
Partition name: system
Filename: system.img , Offset: 00000B000000 , filesize: 3221032960 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 20507.18 KB/s
Partition name: cache
Filename: cache.img , Offset: 0000CB000000 , filesize: 8388900 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 22
Done writing partition. Write speed: 14884.82 KB/s
Writing DL_Info...
Writing DL_Info done
Partition USERDATA : formatting as EXT4. Please wait ...
Formatting completed
Writing eMMC Register ...
Reg: 179 Value: 0x48
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
All done time: [00:02:55:204]
Get firmware version
Brand = ZTE
Manufacturer = ZTE
Device = ZTE_BLADE_V0720
Model = ZTE BLADE V7 LITE
Phone platform = mt6735m
CPU Abi = armeabi-v7a
Mediatek platform = MT6735
Android release = 6.0
Firmware version = ZTE_BLADE_V7_LITE_B13
Firmware date = 2016? 08? 25? ??? 21:03:05 CST
Setting bus width to 8 Bit
Setting frequence to 42 MHz
eMMC Init returned = 0
EMMC Device Information :
EMMC CID: 150100464E31324D4200C20AC41C111D
EMMC CSD: D02701320F5903FFF6DBFFEF92404009
EMMC Manufacture : SAMSUNG , EMMC NAME: FN12MB , HEX: 464E31324D42 , S/N: C20AC41C , rev. 0x00
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 1/2014
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: FN12MB_C20AC41C_20191103_182940.extcsd
EMMC Init completed.
Operation: Write by vendor (MediaTek)
Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0003A3DFBE00
GPT-partitioning done
Partition name: preloader
Filename: preloader_ztexa6735m_35u_m.bin , Offset: 000000000000 , filesize: 120032 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2206.41 KB/s
Partition name: lk
Filename: lk.bin , Offset: 000001C80000 , filesize: 368840 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 10014.35 KB/s
Partition name: boot
Filename: boot.img , Offset: 000001D80000 , filesize: 8421376 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 11467.77 KB/s
Partition name: recovery
Filename: recovery.img , Offset: 000002D80000 , filesize: 9224192 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 22023.59 KB/s
Partition name: logo
Filename: logo.bin , Offset: 000003D80000 , filesize: 424258 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 13848.71 KB/s
Partition name: secro
Filename: secro.img , Offset: 000005280000 , filesize: 135168 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 7912.05 KB/s
Partition name: tee1
Filename: tz1.img , Offset: 000006080000 , filesize: 60416 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3227.21 KB/s
Partition name: tee2
Filename: tz2.img , Offset: 000006580000 , filesize: 60416 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 11132.01 KB/s
Partition name: system
Filename: system.img , Offset: 00000B000000 , filesize: 3221032960 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 20507.18 KB/s
Partition name: cache
Filename: cache.img , Offset: 0000CB000000 , filesize: 8388900 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 22
Done writing partition. Write speed: 14884.82 KB/s
Writing DL_Info...
Writing DL_Info done
Partition USERDATA : formatting as EXT4. Please wait ...
Formatting completed
Writing eMMC Register ...
Reg: 179 Value: 0x48
Reg: 177 Value: 0x00
Reg: 162 Value: 0x01
All done time: [00:02:55:204]
Get firmware version
Brand = ZTE
Manufacturer = ZTE
Device = ZTE_BLADE_V0720
Model = ZTE BLADE V7 LITE
Phone platform = mt6735m
CPU Abi = armeabi-v7a
Mediatek platform = MT6735
Android release = 6.0
Firmware version = ZTE_BLADE_V7_LITE_B13
Firmware date = 2016? 08? 25? ??? 21:03:05 CST