Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

perata · Sep 9, 2019

Reove FRP ECHO FLOW

[url=https://www.0zz0.com]

[/URL]

Code:

EXE: NckDongle Spreadtrum Module 1.0
SELECTED: SC9832A_EMMC
ACTION: Erase FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM52)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: HN
Hardware: SP9832A-2_V1.1.0(4M)
Platform: sc8830
Fota platform: Sprd9832_6.0
Board: sp9832a_2h11_volte
Build Id: MRA58K
Model: FLOW
Android Release: 6.0
Android Version: ECHO_FLOW_V13_20170612
Security patch: 2017-03-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:12
Done.

Br-PeraTa

perata · Sep 9, 2019

Remove FRP ITeL iT1409

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

EXE: NckDongle Spreadtrum Module 1.0
SELECTED: SC7731C_EMMC
ACTION: Erase FRP
Start Detect phone...
Detected: SPRD U2S Diag (COM52)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
FileSystem: EMMC
Manufacturer: Itel
Hardware: SP7731C_V1.0.0
Platform: sc8830
Board: sp7731ceb_it1409
Build Id: MRA58K
Model: itel it1409
Android Release: 6.0
Android Version: it1409-W406A-6.0-OP-V017-20170118
Security patch: 2016-12-05
This phone have frp partition.
Removing frp, wait...
Format OK.
Total Time: 00:00:14
Done.

Br-PeraTa

perata · Sep 15, 2019

Repair imei ENERGY Neo 2

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

 Selected connection metod: Meta Connection
 Exe version: NCKDongle AndroidMTK 2.6.0.0
 Selected phone: ELBRUS
 Action : IMEI REPAIR.
 IMEI[1] for write : 8615***************
 IMEI[2] for write : 862****************
 Scanning for presents meta ports...
 Phone must be off with battery inside.
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [51]Detected: MediaTek PreLoader USB VCOM (Android) (COM51)
 \\?\usb#vid_0e8d&pid_2000#6&1923b7cb&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
 USB\VID_0E8D&PID_2007\6&1923B7CB&0&5
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : mt6735m,S01
 [AP]APP_VER: CF197_DCF1971_ES_L113
 Making target channel configuration, wait...
 Making tunnel configuration, wait...
 Rebooting to meta, wait....
 [META]BaseBand CPU : MT6735, E00
 [META]SW_VER : MOLY.LR9.W1444.MD.LWTG.MP.V79.P15
 [META]HW_VER : DW6753_65T_S_M0_HW
 Meta mode conected ok, start reading phone....
 IMEI to repair: [1] 8615**************
 Phone imei[1] : 8615**************
 IMEI to repair: [2] 862***************
 Phone imei[2] : 8624***************
 Clean Boot flag ok.
 [0]All done.

Br-PeraTa

perata · Oct 5, 2019

Remove FRP Infinix X623

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

Exe Version: NckDongle Qualcomm Module 0.12.6
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM50) detected.
Hello received.
HW ID: 00000000E1600500
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8917
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 14,56 GB  Partitions count: 49
[010BEFDF]Userdata Size: 8,37 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\pc\Documents\NckDongle\qualcomm_module\qc_module_Logs\reset_frp_MSM8917_00000000E1600500_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F1.txt
Total Time: 00:00:02
Done.

Br-PeraTa

perata · Oct 11, 2019

Unlock Network Alcatel P310X (one touch pop 7)

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

 Exe version: NCKDongle AndroidMTK 2.6.0.0
 Selected model: Alcatel  OT-P310
 Action: Unlock
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM69)
 Boot mode: Preloader
 BBCHIP: 6582 1 ca01
 Using Algo 1.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6582
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (29Gb+8192Mb) TOSIBA 0x303034473930
 EMMC FW VERSION: 10:00:00:00:00:00:00:00
 EMMC CID: 110100303034473930 : 00000000000000
 EMMC UA SIZE: 0xec000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xec480000       [3.692 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM Port (COM35)
 Phone have OTP partition.
 MODEL FROM PROINFO: P310X-2BRGPL1
 SECRO FROM PROINFO: x1a0eo00au00
 OTP IMEI: 863****************
 Reading security, wait...
 SIM[1]:
 Block1(N): Locked (remain:1) Code : 1656250942
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Unlocking target...please wait.
 Unlock finished.
 Wait untill phone will start charging.
 [0]All done.

best regardis
Br-PeraTa

deedar dda · Oct 11, 2019

Exe Version: NckDongle Qualcomm Module 0.12.1
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM59) detected.
Hello received.
HW ID: 00000000E1A00900 MSM8953
PK HASH: 60BA997FEF6DA9F05885FA11F1DD6D2A90D052A257A09C2075D7246CC73C0D43
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
CPU: MSM8953
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 58.24 GB Partitions count: 54
[06A51BCF]Userdata Size: 53.16 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*
Log saved: C:\Users\test\Documents\NckDongle\qc_module_Logs\reset_frp_MSM8953_00000000E1A00900_60BA997FEF6DA9F05885FA11F1DD6D2A90D052A257A09C2075D7246CC73C0D431.txt
Total Time: 00:00:07
Done.

perata · Oct 12, 2019

Remove FRP ENERGY Neo 2

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

 Exe version: NCKDongle AndroidMTK 2.6.0.0
 Selected model: 0-By CPU  ELBRUS
 [auto]Action: Reset FRP
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM Port (COM5)
 Boot mode: Preloader
 BBCHIP: 335 0 ca00
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6735M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 1 GB  DRAM
 ----------------------------------------------------
 EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
 EMMC FW VERSION: 07:00:00:00:00:00:00:00
 EMMC CID: 90014A483847316505 : 00000000000000
 EMMC UA SIZE: 0x1d2000000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x1d2c00000      [7.293 GB]
 Checking data, wait...
 
 writing para!
 Writing FRP, wait...
 FRP Reset Done.
 Wait untill phone will start charging.
 [0]All done.

Br-PeraTa

perata · Oct 25, 2019

Repair imei Xiaomi redmi Note 4

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

 Selected connection metod: Meta Connection
 Exe version: NCKDongle AndroidMTK 2.6.1
 Selected phone: ELBRUS
 Action : IMEI REPAIR.
 IMEI[1] for write : 8654**************
 IMEI[2] for write : 8657**************
 Scanning for presents meta ports...
 Phone must be off with battery inside.
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [4]Detected: PreLoader USB VCOM Port (COM4)
 \\?\usb#vid_0e8d&pid_2000#6&1460304c&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [8]META Port Detected: Gadget CDC VCOM Driver (COM8)
 USB\VID_0E8D&PID_2007\6&1460304C&0&2
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : mt6797,S01
 [AP]APP_VER: alps-mp-m0.mp9-V1.64_lcsh6797.6c.lw.m_P68
 Making target channel configuration, wait...
 Making tunnel configuration, wait...
 Rebooting to meta, wait....
 [META]BaseBand CPU : MT6797
 [META]SW_VER : MOLY.LR11.W1603.MD.MP.V13.18.P31
 [META]HW_VER : LCSH6797_6C_LW_M_HW
 Meta mode conected ok, start reading phone....
 IMEI to repair: [1] 865***************
 Phone imei[1] : 865***************
 IMEI to repair: [2] 86*****************
 Phone imei[2] : 8657****************
 Clean Boot flag ok.
 [0]All done.

->>Br-PeraTa<<-

perata · Oct 26, 2019

Remove FRP Archos 50D Helium 4G

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

Exe Version: NckDongle Qualcomm Module 0.12.6
Operation: Reset FRP
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM16) detected.
Hello received.
HW ID: 00000000E1507000 MSM8916
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8916
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 7,28 GB  Partitions count: 30
[00A7EFDF]Userdata Size: 5,25 GB
Erasing FRP, wait.....
Erasing FRP, finished
Restarting phone.....
*************************************
Log saved: C:\Users\mus\Documents\NckDongle\qualcomm_module\qc_module_Logs\reset_frp_MSM8916_00000000E1507000_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F1.txt
Total Time: 00:00:12

->>Br-PeraTa<<-

perata · Nov 18, 2019

Unlock Alcatel 6039Y

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

PHONE: OT-6036Y
Port: ALCATEL HS-USB Diagnostics 901D (COM21)
Build id: MPSS.DI.2.0.c11.1-00010-M8926DAAAANAZM-1
Compile Date: May 10 2014
Compile time: 12:36:56
Release date: May 07 2014
Release time: 23:00:00
IMEI: 8624[B][B]****[/B][/B]
Reading, wait.
Backup saved to: C:\Users\mus\Documents\NckMain\backup\alcatel_android\OT-6036Y_862419021155154_simlock_backup_1.bin
 
Simlock Status:
SIMLOCK[0] Unlocked
SIMLOCK[1] Unlocked
SIMLOCK[2] Unlocked
SIMLOCK[3] Unlocked
SIMLOCK[4] Unlocked
Start direct unlock, wait....
Direct unlock done.
Please restart phone.[/COD

[SIZE=5][COLOR=rgb(247, 218, 100)]->>[/COLOR][COLOR=rgb(65, 168, 95)]PeraTa[/COLOR][COLOR=rgb(247, 218, 100)]<<-[/COLOR][/SIZE]

perata · Dec 5, 2019

Write Firmware One Plus A0001 done

[url=https://www.0zz0.com]

Please login to view image

[/URL]

Code:

Exe Version: NckDongle Qualcomm Module 0.12.6
Operation: Upgrade
Searching for phone.....
Qualcomm HS-USB QDLoader 9008 (COM67) detected.
Hello received.
HW ID: 00000000E1407B00 MSM8974
PK HASH: CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F
Checking database for suitable loader.....
Arhitecture:32 bits
[32]Sending loader, please wait..
Waiting for loader to start...
[1] Send NOP ok, loader start.
CPU: MSM8974
MaxPayloadSizeFromTargetInBytes: 4096
MaxPayloadSizeToTargetInBytes: 8192
Reading partition info, wait.
Volume[0] Size: 58,24 GB  Partitions count: 29
[06F99998]Userdata Size: 55,8 GB
[FLASH][SKIP] name: modem
[0]Writing: sbl1 Start: 147456 length: 1024
[0]Writing: aboot Start: 180224 length: 2048
[0]Writing: rpm Start: 182272 length: 1000
[0]Writing: boot Start: 196608 length: 14552
[0]Writing: tz Start: 229376 length: 1000
[ERASE][SKIP] name: modemst1
[ERASE][SKIP] name: modemst2
[0]Writing: oppodycnvbk Start: 238568 length: 20480
[0]Writing: oppostanvbk Start: 259048 length: 20480
[0]Writing: system Start: 294912 length: 2711552
[0]Sparse writing: cache  Total chunks: 22 BlockSize: 4096 Sector Size: 512
[0]Writing: recovery Start: 4120576 length: 19940
Erasing: fsg start: 4153344 length: 3072
[0]Writing: fsg Start: 4153344 length: 3072
Erasing: misc start: 4161554 length: 2048
[0]Writing: misc Start: 4161554 length: 2048
[0]Writing: logo Start: 4163602 length: 32768
[0]Writing: driver Start: 4196370 length: 65536
[0]Sparse writing: userdata  Total chunks: 940 BlockSize: 4096 Sector Size: 512
[ERASE][SKIP] name: PrimaryGPT
[FLASH][SKIP] name: PrimaryGPT
[ERASE][SKIP] name: BackupGPT
[FLASH][SKIP] name: BackupGPT
Applying patch, wait...
Restarting phone.....
*************************************
Log saved: C:\Users\mus\Documents\NckDongle\qualcomm_module\qc_module_Logs\flash_phone_MSM8974_00000000E1407B00_CC3153A80293939B90D02D3BF8B23E0292E452FEF662C74998421ADAD42A380F1.txt
Total Time: 00:04:28
Done.

->>Br-Perata<<-

perata · Mar 13, 2020

Read Pattern Vmobile J6 7.0

[url=https://www.0zz0.com]

Please login to view image

[/URL]

•○: Br-PeraTa :○•

perata · May 28, 2020

• Remove Screen Lock and FRP VIVO 1820 8.1.0 By NCK Dongle •

♦ Remove screen Lock ♦

Please login to view image

Code:

 Action : Format UserData.
Selected Vivo:Y91C new
Exe version: NCKDongle AndroidMTK 2.6.8
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek USB Port (COM15)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Loading emmi from database
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000    
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000      [29.145 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM107)
Detecting format adress....wait!
Starting generic userdata format...!
Partition: cache  begin: 0x122800000       length: 0x10000000    
Partition: userdata  begin: 0x132800000       length: 0x6118fbe00    
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
[helio]Wait untill phone will start charging.
[0]All done.

♦Remove FRP ♦

Please login to view image

Code:

 Exe version: NCKDongle AndroidMTK 2.6.8
Selected model: Vivo  Y91C new
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Keep VOL+ button untill inserting USB cable.
Detected : MediaTek USB Port (COM15)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Loading emmi from database
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000    
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000      [29.145 GB]
Phone have OTP partition.
Modem version: MOLY.LR12A.R2.MP.V23.P201
Starting helio frp, not disconnect phone untill done
[HELIO][frp]Format partition, please wait...
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

safrou · Jun 1, 2020

Huawei Y6 Pro, TIT-U02 remove frp done

01/06/2020 13:14:01
Ultimate NCK Huawei Module v1.0.0.0360
Account:

Before detection connect cable to usb and enable Manufacture mode !

Qualcomm and HiSilicon: ##2846579##
MTK: ##14789632##
Windows: ##2846579#

ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode

Erase FRP
2020-06-01 13:14:01.057 Erase FRP start
2020-06-01 13:14:01.432 Reading phone info...
2020-06-01 13:14:01.979 Read phone info success!
Model: HUAWEI TIT-U02
Firmware ver.: TIT-U02C328B10
SN: TCY9KA96B1201336

2020-06-01 13:14:02.026 Phone info data backup saved to file C:\UMTool\UMT_Huawei\UMT_Huawei\Ultimate NCK Huawei Module v1.0.0.0360\Backup\20200601_131402_TCY9KA96B1201336.BAK

2020-06-01 13:14:02.026 Connecting to server...
2020-06-01 13:14:02.292 Connected!
2020-06-01 13:14:04.031 Reading FRP certify data...
2020-06-01 13:14:04.156 Read FRP certify success!
2020-06-01 13:14:04.156 Signing FRP certify data...
2020-06-01 13:14:04.375 Signing FRP certify data success!
2020-06-01 13:14:04.375 Erasing FRP...
2020-06-01 13:14:08.069 Erase FRP done!

perata · Jun 29, 2020

• Unlock Networck Samsung I8190 •

Please login to view image

Mardanov.T · Sep 25, 2020

Huawei Y6 2019 MRD-LX1F FRP Remove Done With TP

Exe version: NCKBox AndroidMTK 2.9
Selected model: Huawei MRD-LX1
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM17)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6761 200 ca01
Using Algo 1.
Helio MT6761 phone detected, swithing to helio api
Loading emmi from database
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6761
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000 [29.145 GB]
Modem version: MOLY.LR12A.R2.TC3.UNI.PR3.SP.V1.P27
Starting helio frp, not disconnect phone untill done
[HELIO][frp]Format partition, please wait...
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

umureyyan8729 · Oct 19, 2021

ACTION: Direct Unlock
Detecting phone, wait...
Using connection mode 1
Detected: SCI USB2Serial (COM55)

Platform Version: MOCORTM_18A_W20.18.1_P1_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_W20.18.1_P1
HW Version: sc9832e_modem
05-22-2020 14:39:46
Build number: sp9832e_1h10_gofu-user 10 QP1A.190711.020 27546 release-keys
EMMC DDR SIZE :8.00 GB+1.00 GB
UID: e85313b4c0700d993d99e1694dcfc71e469b8da7a42a4895f9 d7f5622f4459da

IMEI 1: 86235##########
IMEI 2: 86235##########
IMEI 3: 86740##########
IMEI 4: 86740##########
BT: 7CB37B394096
WIFI: 7CB37B399046
Reading simlock backup, wait....
Saved to: C:\Users\User\Documents\spreadtrum_module\diag_nvr am_backup\sp9832e_1h10_gofu-user 10 QP1A.190711.020 27546 release-keys_86235##########__diag_simlock_nvram_backup.ta r

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[3]Simlock Type: 0 0
Sim 1 Unlock Code: 45447328
Sim 2 Unlock Code: 45447338
Warning, this is factory key, some opperators can modify factory key.
Unlock is supported for this phone
Writing simlock...
Writing simlock ok
Done.
Log saved:
C:\Users\User\Documents\spreadtrum_module\Saved_Lo gs\sp9832e_1h10_gofu-user10QP1A.190711.02027546release-keys_86235##########_diag_simlock_unlock.txt

ifone · Nov 20, 2021

Vivo S9e Passcode done by NCK Box

Below screenshot:

Please login to view image

Br,

Ziggywong0305 · Dec 10, 2021

ACTION: SimUnlock
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM16)
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
New flash metod detected.
UID: TCUT11_14_3_9
***************
Manufacturer: ZTE
Brand: ZTE
Device: P963F70
Model: ZTE Blade A31
Build ID: RP1A.201005.001
CPU arhitecture: armeabi-v7a
Build product name: s9863a1h10_go_32b
Build description: s9863a1h10_go_32b_general-user 11 RP1A.201005.001 20210717.125738 release-keys
Product name: P963F70_1
SW Version: FLOW_JM_P963F70V1.0.0B02
Board: s9863a1h10_go_32b
Build Id: RP1A.201005.001
Android Release: 11
Android Version: FLOW_JM_A31_V1.0
Security patch: 2021-07-05
MatchesMask [l_fixnv1_a] [l_fixnv1_a] Size to download: 2 MB
Reading l_fixnv1_a
IMEI 1: 864210052998705
IMEI 2: 867400020316620
IMEI 3: 867400020316638
IMEI 4: 867400020316646
Simlock Type: 4

Simlock Status:
SIMLOCK: ACTIVE
NETWORK SUBNET: INACTIVE
SP LOCK: INACTIVE
CORPORATE: INACTIVE
USER LOCK: INACTIVE
[4]Simlock Type: 0 0
Backup saved to: C:\Users\User\Documents\spreadtrum_module\flashmode_nvram_backup\FLOW_JM_A31_V1.0_s9863a1h10_go_32b\FLOW_JM_A31_V1.0_s9863a1h10_go_32b_nvram_backup.tar
Testing key 1
Testing key 2
Testing key 3
Phone security supported by exe
Integrity seems ok, proceed with unlock....
Start write unlock, wait...
[can take 0-10 sec]Wait untill phone restart.
Log saved:
C:\Users\User\Documents\spreadtrum_module\Saved_Logs\FLOW_JM_A31_V1.0_864210052998705_867400020316620_sim_unlock_phone.txt
Total Time: 00:00:42
Done.

Abdullah Ali · Nov 10, 2022

Samsung A03 SM-A035F Payjoy Lock Remove One Click | A035F MDM Lock Remove One Click With Loader With NCK And Avengers

Password : GSM UNLOCK INFO
Download Loader Link : SM-A035F Loader By Abdullah Ali

Post here successfully Unlocked / Repaired / Flashed operations via NCK BOX/Dongle Premium v2

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Active Member

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Active Member

Friend's Martview

Friend's Martview

Active Member

Active Member

Friend's Martview

Samsung A03 SM-A035F Payjoy Lock Remove One Click | A035F MDM Lock Remove One Click With Loader With NCK And Avengers​

Samsung A03 SM-A035F Payjoy Lock Remove One Click | A035F MDM Lock Remove One Click With Loader With NCK And Avengers