Post Sucessfully Here Sucessfully Repaired/Dead Recovered Handset By Ufi Box

Aug 8, 2018
9
3
India
Karbonn Aura 4g Dead Recover Done with UFI.
Connecting to Download port...
Make sure battery is fully charged before flashing !!!
Power off the phone, Disconnect and reconnect the battery(if possible), Hold the VOL DOWN or VOL UP+DOWN and connect USB cable
Scanning Download port... Done.
Detected SPRD U2S Diag (COM3)
Connection status: EHCI:HUB:USB 2.0 High-Speed
USB Driver: [DriverCoding Corporation] sprdvcom, version: 2.0.0.131, date: 3-4-2015
Boot id: SPRD3
Sending FDL ... Done.
Boot version: Spreadtrum Boot Block version 1.1
Change baudrate to 460800 ... Done.
Sending NAND_FDL ... Done.

Reading prodnv, size: 5 MiB... Done.
Reading miscdata, size: 1 MiB... Done.
Repartitioning ... Done.
Downloading prodnv, size: 5 MiB... Done.
Downloading miscdata, size: 1 MiB... Done.
Erasing uboot... Done.
Downloading splloader, size: 31 KiB... Done.
Downloading l_modem, size: 16.02 MiB... Done.
Downloading l_ldsp, size: 1.50 MiB... Done.
Downloading l_gdsp, size: 2.88 MiB... Done.
Downloading l_warm, size: 1.79 MiB... Done.
Downloading pm_sys, size: 20.99 KiB... Done.
Downloading wcnfdl, size: 7.12 KiB... Done.
Downloading wcnmodem, size: 1.22 MiB... Done.
Downloading boot, size: 11.48 MiB... Done.
Downloading recovery, size: 12.22 MiB... Done.
Downloading system, size: 1.90 GiB... Done.
Downloading userdata, size: 10.19 MiB... Done.
Downloading logo, size: 901.05 KiB... Done.
Downloading fbootlogo, size: 901.05 KiB... Done.
Downloading cache, size: 5.22 MiB... Done.
Downloading persist, size: 2 MiB... Done.
Downloading sysinfo, size: 5 MiB... Done.
Downloading uboot, size: 493.05 KiB... Done.

Completed in 32 mins 2.833 s
 

ilyasrao

Active Member
Nov 15, 2016
36
17
HUAWEI SCL-U31
HS-USB QDLoader 9008 DEAD RECOVERED

Firmware package: Huawei.Y6.SCL-U31C900B130.5.1.1.qcom.9008.msm8909
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM28)
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.0, date: 7-8-2015
Initializing...
MSM Serial number: 0x02bce39e
MSM HW ID: 0x009600e1 (MSM8x09)
OEM Public Key Hash: 0xcc3153a80293939b90d02d3bf8b23e0292e452fef662c74998421adad42a380f
SBL SW version: 0
Firehose: prog_emmc_firehose_8909_ddr.mbn
sha1: d96ada9cc47bec34c3af6a3b54d6a73466660dcb, size: 273.20 KiB
QC_IMAGE_VERSION: BOOT.BF.3.1.2.C2-00014
IMAGE_VARIANT: DAADANAZA
OEM_IMAGE_VERSION: sw-PC
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Sending configurations...
TargetName: 8909
MemoryName: eMMC
Version: 1
Firehose configured.
Storage type: eMMC
Capacity: 7.29 GiB(7,830,765,568 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
Erasing userarea... Done.
Processing rawprogram0.xml
Writing gpt_main0 at 0x00000000 (34 sectors)... Done.
Writing sbl1 at 0x00004400 (1024 sectors)... Done.
Writing hyp at 0x00084400 (1024 sectors)... Done.
Writing sec at 0x00400000 (64 sectors)... Done.
Writing DDR at 0x00408000 (64 sectors)... Done.
Writing rpm at 0x00800000 (1024 sectors)... Done.
Writing tz at 0x00880000 (1024 sectors)... Done.
Writing aboot at 0x00900000 (10112 sectors)... Done.
Writing pad at 0x00DF0000 (2048 sectors)... Done.
Writing oeminfo at 0x00EF0000 (131072 sectors)... Done.
Writing misc at 0x04EF0000 (8192 sectors)... Done.
Writing modemst1 at 0x052F0000 (8192 sectors)... Done.
Writing modemst2 at 0x056F0000 (8192 sectors)... Done.
Writing fsg at 0x05C00000 (8192 sectors)... Done.
Writing modem at 0x06000000 (409600 sectors)... Done.
Writing fsc at 0x12800000 (2 sectors)... Done.
Writing ssd at 0x12800400 (16 sectors)... Done.
Writing log at 0x12802400 (131072 sectors)... Done.
Writing persist at 0x16C00000 (16384 sectors)... Done.
Writing boot at 0x17400000 (131072 sectors)... Done.
Writing recovery at 0x1B400000 (98304 sectors)... Done.
Writing erecovery at 0x1E400000 (98304 sectors)... Done.
Writing cache at 0x21400000 (524288 sectors)... Done.
Writing cust at 0x31400000 (524288 sectors)... Done.
Writing system at 0x41400000 (3670016 sectors)... Done.
Reset power ... Done.
Flashing completed in 2 mins 32.543 s
 

ilyasrao

Active Member
Nov 15, 2016
36
17
Y625-U32 READED SUCCESSFULLY QDloader 9008 mode
platform: msm8610, cpu abi: armeabi-v7a
manufacturer: HUAWEI
board: Y625-U32, name: Y625-U32
brand: HUAWEI, model: HUAWEI Y625-U32
build id: HUAWEIY625-U32, version: 4.4.2 Lollipop (Y625-U32V100R001C328B105)
build description: 8212-user 4.4.2 HUAWEIY625-U32 C328B105 ota-rel-keys,release-keys

Reading gpt_main0 at 0x00000000-0x000043FF size: 17 KiB... Done.
Reading sbl1 at 0x00004400-0x000843FF size: 512 KiB... Done.
Reading sdi at 0x00084400-0x000A43FF size: 128 KiB... Done.
Reading aboot at 0x000A4400-0x001243FF size: 512 KiB... Done.
Reading rpm at 0x00124400-0x001A13FF size: 500 KiB... Done.
Reading tz at 0x001A1400-0x0021E3FF size: 500 KiB... Done.
Reading pad at 0x0021E400-0x0031E3FF size: 1 MiB... Done.
Reading modemst1 at 0x0031E400-0x0049E3FF size: 1.50 MiB... Done.
Reading modemst2 at 0x0049E400-0x0061E3FF size: 1.50 MiB... Done.
Reading misc at 0x0061E400-0x0071E3FF size: 1 MiB... Done.
Reading fsc at 0x0071E400-0x0071E7FF size: 1 KiB... Done.
Reading ssd at 0x0071E800-0x007207FF size: 8 KiB... Done.
Reading modem at 0x04000000-0x07FFFFFF size: 64 MiB... Done.
Reading DDR at 0x08000000-0x08007FFF size: 32 KiB... Done.
Reading boot at 0x08008000-0x08A07FFF size: 10 MiB... Done.
Reading system at 0x08A08000-0x60207FFF size: 1.37 GiB... Done.
Reading persist at 0x60208000-0x62207FFF size: 32 MiB... Done.
Reading cache at 0x62208000-0x687A17FF size: 101.60 MiB... Done.
Reading recovery at 0x687A1800-0x691A17FF size: 10 MiB... Done.
Reading logo at 0x691A1800-0x697A17FF size: 6 MiB... Done.
Reading fsg at 0x697A1800-0x699217FF size: 1.50 MiB... Done.
Reading userdata at 0x69921800-0xEBFFBDFF size: 2.04 GiB... Done.
Files saved to \\I:\Huawei\Y625-U32\

VIDEO WILL UPLOAD VERY SOON Y625-U32.jpg
 
Reactions: Admin
Aug 8, 2018
9
3
India
LYF Jio F41T (Black) Blue screen fix with flash.

Connecting to Download port...
Make sure battery is fully charged before flashing !!!
Power off the phone, Disconnect and reconnect the battery(if possible), Hold the VOL DOWN or VOL UP+DOWN and connect USB cable
Scanning Download port... Done.
Detected SPRD U2S Diag (COM6)
Connection status: XHCI:HUB3:HUB3:USB 2.0 High-Speed
USB Driver: [DriverCoding Corporation] sprdvcom, version: 2.0.0.114, date: 6-27-2014
Boot id: SPRD3
Sending FDL ... Done.
Boot version: Spreadtrum Boot Block version 1.1
Change baudrate to 460800 ... Done.
Sending NAND_FDL ... Done.
Reading l_fixnv1, size: 1 MiB... Done.
Reading prodnv, size: 5 MiB... Done.
Reading miscdata, size: 1 MiB... Done.
Repartitioning ... Done.
Downloading l_fixnv1, size: 362.86 KiB... Done.
Downloading prodnv, size: 5 MiB... Done.
Downloading miscdata, size: 1 MiB... Done.
Downloading usbmsc, size: 18.36 MiB... Done.
Erasing uboot... Done.
Downloading splloader, size: 32 KiB... Done.
Downloading l_modem, size: 13.66 MiB... Done.
Downloading l_ldsp, size: 1.50 MiB... Done.
Downloading l_gdsp, size: 2.88 MiB... Done.
Downloading pm_sys, size: 22 KiB... Done.
Downloading wcnfdl, size: 7.12 KiB... Done.
Downloading wcnmodem, size: 1.22 MiB... Done.
Downloading boot, size: 11.91 MiB... Done.
Downloading recovery, size: 12.48 MiB... Done.
Downloading system, size: 344.64 MiB... Done.
Downloading userdata, size: 10.20 MiB... Done.
Downloading logo, size: 76.05 KiB... Done.
Downloading fbootlogo, size: 76.05 KiB... Done.
Downloading cache, size: 5.22 MiB... Done.
Erasing l_runtimenv1... Done.
Downloading persist, size: 2 MiB... Done.
Downloading sysinfo, size: 5 MiB... Done.
Downloading uboot, size: 455 KiB... Done.
Completed in 4 mins 17.321 s