Connection status: XHCI:HUB3[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-2159
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 16MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RP64AB (0x525036344142), rev: 0x00, serial number: 0x831DCC21
Manufacturing date: sep. 2021
CID: 15010052 50363441 4200831D CC2198EC
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 1545]
User area: 58.24 GiB(62,537,072,640 bytes)
Reading userarea, size: 1 GiB... Failed to read block 0x02E70000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
always . no matter what im doing .. this is a A03s samsung always same error
i have adapter v2
Interface: UFI High-Speed
Serial number: 0011-8844-2159
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 16MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RP64AB (0x525036344142), rev: 0x00, serial number: 0x831DCC21
Manufacturing date: sep. 2021
CID: 15010052 50363441 4200831D CC2198EC
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 1545]
User area: 58.24 GiB(62,537,072,640 bytes)
Reading userarea, size: 1 GiB... Failed to read block 0x02E70000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
always . no matter what im doing .. this is a A03s samsung always same error
i have adapter v2