maanarman
Friend's Martview
Qmobile A65 Write Flash Done
Code:
Flash files count is :15
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.6
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM47)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM145)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.
