UMT [22-03-24] UMTv2/UMTPro QcFire v9.4 - Samsung S24, Z Flip4, Moto G30 and more..

[SPYROS]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v9.4
The Ultimate Qualcomm Tool



Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator

Added:

Motorola (Test)
- G30 (XT2129-1)
- G30 (XT2129-2)

Samsung
- Galaxy A6+ (SM-A605F) BIT4
- Galaxy A6+ (SM-A605G) BIT4
- Galaxy A71 5G (SM-A716W) BIT9
- Galaxy A8 Star (SM-G885F) BIT2
- Galaxy A80 (SM-A805) BIT4
- Galaxy A8s (SM-G8870) BIT1
- Galaxy A9 (SM-A920F) BIT1
- Galaxy A90 5G (SM-A905F) BIT4
- Galaxy C7 (SM-C7000) BIT2
- Galaxy J2 Pro (SM-J250F) BIT2
- Galaxy J2 Pro (SM-J250M) BIT5
- Galaxy J4 Core (SM-J410F) BIT2
- Galaxy J4 Core (SM-J410G) BIT1
- Galaxy J4+ (SM-J415F) BIT4
- Galaxy J4+ (SM-J415G) BIT2
- Galaxy J6+ (SM-J610F) BIT3
- Galaxy J6+ (SM-J610G) BIT2
- Galaxy J8 (SM-J810F) BIT4
- Galaxy J8 (SM-J810G) BIT2
- Galaxy J8 (SM-J810M) BIT2
- Galaxy J8 (SM-J810Y) BIT3
- Galaxy M14 (SM-M145F) BIT1
- Galaxy Note 10 (SM-N9700) BIT2
- Galaxy Note 10 (SM-N970U) BIT8
- Galaxy Note 10+ (SM-N975U) BIT8
- Galaxy Note 20 Ultra 5G (SM-N986U) BIT6
- Galaxy Note 8 (SM-N9500) BIT5
- Galaxy Note 9 (SM-N9600) BIT4
- Galaxy S10 (SM-G9730) BIT2
- Galaxy S10+ (SM-G9750) BIT4
- Galaxy S10e (SM-G9700) BIT2
- Galaxy S20 5G (SM-G981U) BIT8
- Galaxy S20 Ultra 5G (SM-G9880) BIT1
- Galaxy S20 Ultra 5G (SM-G988N) BIT1
- Galaxy S20 Ultra 5G (SM-G988U) BIT8
- Galaxy S20 Ultra 5G (SM-G998W) BITA
- Galaxy S20+ 5G (SM-G986N) BIT1
- Galaxy S20+ 5G (SM-G986U) BIT8
- Galaxy S22 5G (SM-S9010) BIT4
- Galaxy S23 Ultra (SM-S918W) BIT2
- Galaxy S23 Ultra 5G (SM-S918N) BIT2
- Galaxy S23+ (SM-S916W) BIT2
- Galaxy S24 (SM-S921U) BIT1
- Galaxy S24 Ultra (SM-S928B) BIT1
- Galaxy S24 Ultra (SM-S928U) BIT1
- Galaxy S24+ (SM-S926U) BIT1
- Galaxy S8 (SC-02J) BIT1
- Galaxy S8 (SM-G9500) BIT4
- Galaxy S8+ (SC-03J) BIT1
- Galaxy S8+ (SM-G9550) BIT4
- Galaxy S9 (SM-G9600) BIT5
- Galaxy S9+ (SM-G9650) BIT5
- Galaxy Tab A (SM-T595) BIT4
- Galaxy Tab S5e (SM-T725) BIT1
- Galaxy Z Flip4 (SM-F721B) BIT5
- Galaxy Z Flip4 (SM-F721U) BIT4

TCL
- TCL 10 5G UW (T790)
- TCL 10 Plus (T782)
- TCL 10 Pro (T799)
- TCL 10L (T770)
- TCL 20 5G (T781)
- TCL 20 A 5G (T768S)
- TCL 20 Ax 5G (T768O)
- TCL 20 Pro 5G (T810)
- TCL 20 SE (T671)
- TCL 20L (T774H)
- TCL 20L+ (T775H)
- TCL 30 V 5G (T781S)
- TCL Plex (T780H)


Updated Motorola Single Image Extraction
- Supported newer singleimage file type
- Now it will extracts all files from singleimage binary


Updated Internal Database for Auto-Detection








CONNECTION METHOD:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED

Telegram

U.M.T (c) Official Support Chat


Br,
UMT

 

[GsmToto]

Device : Xiaomi Redmi 5 (MDI1)
Operation : Reset Mi Account (New)
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD37993 0D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_009]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 5 [msm8953] [rosy]
Brand : Xiaomi
Prod.Name : rosy
Software : CUSTOMER_VERSION_rosy, V10.3.2.0.ODAMIXM [Fri Jul 5 19:04:21 WIB 2019]
Android Ver. : 8.1.0
Patch Level : 2019-06-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 1855129413
Display ID : 4TI6-FFZW-MRFKQI
Writing Data...Done
Operation Finished.
QcFire Ver. 9.4

 

[GsmToto]

Device : Motorola G30 (XT2129-2)
Operation : Read Information
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM42)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 0000E802
OPK_DATA : FB370FAEDD231103AB8E7F378579093745967865DE8B49D489AB6C506824349C
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662_007]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, EMMC, 128 GB
LU Count : 4 [0x0E8F6000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
USERDATA : Encrypted
Operation Finished.
QcFire Ver. 9.4

 

[jazzykenn]

Great update

 

[wadex12]

Please help on how to service vivo y27s frp Qualcomm device

 

[GsmToto]

Device : Samsung Galaxy Z Flip4 (SM-F721U) BIT4
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-F721U_BIT4.ufl]
Preparing Loader...Done
Sending Loader [SM-F721U_BIT4]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 256 GB
LU Count : 6 [0x03B6B400] [0x00000800] [0x00000800] [0x00000400] [0x00028000] [0x00001000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : F721WVLS4EXAD
Int. Build : SM-F721W_NA_XAC_QKEY0
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.4

 

[GsmToto]

Device : Samsung Galaxy S23 Ultra 5G (SM-S918B) U3
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS918B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS918B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 512 GB
LU Count : 6 [0x076FA000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4093
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S918BXXS3AWIF
Int. Build : SM-S918B_EUR_XX_QKEY6
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.4

 

[GsmToto]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E5
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware : MSM8996, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : QKQ1.190910.002 V12.5.1.0.QFGEUXM, V12.5.1.0.QFGEUXM [Fri Sep 3 00:28:00 WIB 2021]
Android Ver. : 10
Patch Level : 2021-08-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.4

 

[GsmToto]

Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM665, EMMC, 64 GB
LU Count : 4 [0x0747C000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : , V12.0.6.0.QCOMIXM [Sat Jul 24 13:53:24 WIB 2021]
Android Ver. : 10
Patch Level : 2021-07-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : XXXXXXXXXXXXXXXX
Phone : +XXXXXXXXXXXXX
Display ID : XXXXXXXXXXXXXX
Writing Data...Done
Operation Finished.
QcFire Ver. 9.4