UMT [28-01-24] UMTv2/UMTPro UltimateMTK2 v1.1 - Infinix/Tecno/iTel in Preloader Mode...

[SPYROS]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent



UltimateMTK2 v1.1
The Ultimate MediaTek Tool

What's New:

Updated Infinix/iTel/Tecno V3 (Nov'23) in Preloder Mode
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6781
- MT6785
- MT6833
- MT6877
- MT6893


Added Storage Health Check on Boot
- It will show PreEOL, LifeTime Estimate A, and LifeTime Estimate B when possible.


Updated Xiaomi Mi Account Relok Fix Function
- Tested on MIUI 14


Added Safe Format (Oppo) Option
- We still recommend using Erase Data to Format
- If device is stuck in recovery, use Fix Recovery only
- Do not do anything except Fix Recovery


Added Erase Data + FRP Option


Updated Fix Recovery Function


Revised Format Functions List


Updated Read Information on devices with Dynamic Partitions and A/B Slots


Disabled "SWITCH HI-SPEED" Option by default
- Using Hi-Speed connection may cause issue with poor quality cable
- If you want to use Hi-Speed connection, please tick "SWITCH HI-SPEED" checkbox


Fixed Minor GUI Issues





Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
- You can test PRELOADER EXPLOIT on any device with DA from Vendor even if that DA does not allow Write or Erase.



Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM7)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&dc4a972&0&8#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 1.0.0.0 [USBSER.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : C77E8D623008602FB78211D63C4B1E3F
SoC ID[0] : 4A3BC519D371A8E5A3BCDAF645BB2D92
SoC ID[1] : 78D2B62A09CBD88D3485ACF782531CAC
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_x627_h624.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : FULL-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 700100544132383332232682B1DD762B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228.00 KB]
Ext. RAM : 0x0000000080000000 [2.00 GB]
Flash ID : TA2832
CID : 700100544132383332232682B1DD762B
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x000000074A000000 [29.16 GB]
PRE EOL : NORMAL
Life. Est.A : 80%-90% LIFE TIME USED
Life. Est.B : 90%-100% LIFE TIME USED
Reading Partition Table...OK
Brand : Infinix
Manuf. : INFINIX MOBILITY LIMITED
Model : Infinix X627
Device : Infinix-X627STU
And. Ver. : 9
Prod. Name : H624
Build Dt. : Mon Dec 7 23:10:17 CST 2020
Display ID : X627-H624STXYZAa-P-201207V337
Ver. Inc. : STXYZAa-201207V337
Locale : en-US
Patch : 2020-12-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240128_29667277.log

 

[anku9794905285]

Added Storage Health Check on Boot
Very good update

 

[GsmToto]

Download using Support Access or Mirrors

 

[yousafawan]

Good update UMT Team

 

[nazimulla]

Good update Team

 

[MANISH ROY]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent



UltimateMTK2 v1.1
The Ultimate MediaTek Tool

What's New:

Updated Infinix/iTel/Tecno V3 (Nov'23) in Preloder Mode
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6781
- MT6785
- MT6833
- MT6877
- MT6893


Added Storage Health Check on Boot
- It will show PreEOL, LifeTime Estimate A, and LifeTime Estimate B when possible.


Updated Xiaomi Mi Account Relok Fix Function
- Tested on MIUI 14


Added Safe Format (Oppo) Option
- We still recommend using Erase Data to Format
- If device is stuck in recovery, use Fix Recovery only
- Do not do anything except Fix Recovery


Added Erase Data + FRP Option


Updated Fix Recovery Function


Revised Format Functions List


Updated Read Information on devices with Dynamic Partitions and A/B Slots


Disabled "SWITCH HI-SPEED" Option by default
- Using Hi-Speed connection may cause issue with poor quality cable
- If you want to use Hi-Speed connection, please tick "SWITCH HI-SPEED" checkbox


Fixed Minor GUI Issues





Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
- You can test PRELOADER EXPLOIT on any device with DA from Vendor even if that DA does not allow Write or Erase.



Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

hello sir plzz add this Motorola Moto G54 (XT2343-5 128GB/8GB) cpu type mt6855 frp reset plzz add next upadte

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&19490860&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...Failed!
Please use TP for BROM, or untick Force BROM to work in preloader mode.
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240130_1955324.log

 

[MANISH ROY]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent



UltimateMTK2 v1.1
The Ultimate MediaTek Tool

Please login to view image

What's New:

Updated Infinix/iTel/Tecno V3 (Nov'23) in Preloder Mode
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6781
- MT6785
- MT6833
- MT6877
- MT6893


Added Storage Health Check on Boot
- It will show PreEOL, LifeTime Estimate A, and LifeTime Estimate B when possible.


Updated Xiaomi Mi Account Relok Fix Function
- Tested on MIUI 14


Added Safe Format (Oppo) Option
- We still recommend using Erase Data to Format
- If device is stuck in recovery, use Fix Recovery only
- Do not do anything except Fix Recovery


Added Erase Data + FRP Option


Updated Fix Recovery Function


Revised Format Functions List


Updated Read Information on devices with Dynamic Partitions and A/B Slots


Disabled "SWITCH HI-SPEED" Option by default
- Using Hi-Speed connection may cause issue with poor quality cable
- If you want to use Hi-Speed connection, please tick "SWITCH HI-SPEED" checkbox


Fixed Minor GUI Issues





Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
- You can test PRELOADER EXPLOIT on any device with DA from Vendor even if that DA does not allow Write or Erase.



Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

hello sir plzz add this Motorola Moto G54 (XT2343-5 128GB/8GB) cpu type mt6855 frp reset plzz add next upadte

 

[GsmToto]

rand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&67fe735&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6781 [1066] Helio G96
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 4D95194DC105D3195313D7C668B1019E
SoC ID[0] : 119EF65DDA542D88661C97C7C754C6E2
SoC ID[1] : E03BD25DF8E1EF1AFA50AAE2F33010B0
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_vida.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : CE014B4D384C393030314A4D2D423632 [UFS]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000060000 [384.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8L9001JM-B62
CID : CE014B4D384C393030314A4D2D423632
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 12
Build Dt. : Mon Apr 3 10:23:10 CST 2023
Display ID : vida-user 12 SP1A.210812.016 V13.0.7.0.SGDINXM
Ver. Inc. : V13.0.7.0.SGDINXM
Locale : en-GB
Mod. Dev. : vida_in_global
Patch : 2023-04-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]

 

[GsmToto]

Brand/Model : Xiaomi / *Auto Detect*
Operation : IMEI Repair (Xiaomi New Method-Redmi 9C (angelica))
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&1e4121f5&0&7#{f9f3ff14-
ae21-48a0-8a25-8011a7a931d9}
Driver : MediaTek Inc., 1.0.0.0 [USBSER.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 5C969F1819861688BF15441ADD4D4344
SoC ID[0] : 43A5DF276C65E947D7F2F5E703A57B09
SoC ID[1] : CEED24E2D54F61B35CE0C044FC5A4395
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_k65v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 4501004441343036340122B50621A8DF [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x00000000C0000000 [3,00 GB]
Flash ID : DA4064
CID : 4501004441343036340122B50621A8DF
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : Xiaomi
Ven. Model : M2006C3MG
Platform : mt6765
And. Ver. : 11
Build Dt. : Tue Jul 12 18:03:35 CST 2022
Display ID : RP1A.200720.011
Ver. Inc. : V12.5.4.0.RCRMIXM
Locale : en-GB
Mod. Dev. : angelica_global
Patch : 2022-07-01
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Backup saved as C:\Users\bio hazard\Desktop\angelica - redmi 9c
\angelica - redmi 9c\angelica - redmi 9c\M2006C3MG\9c.zip
IMEI1 : 352xxxxxxxxxxxxx
IMEI2 : 352xxxxxxxxxxxxx
Preparing Data...OK
Writing Data...OK
Fixing Cert...OK
Disabling Signature Check..OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240202_09558833.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Mi Relock Fix
Waiting for Device...Found
Port : MediaTek USB Port (COM7)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&66ca680&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 1.0.0.0 [USBSER.sys]
Mode : BROM
Hw ID : MT6781 [1066] Helio G96
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 6EA151C9963B099B8486C1E01931D14F
SoC ID[0] : C02692FBA7587BAF01CA2006041D346F
SoC ID[1] : EA13F01FBF4EC5BFF4FD9A40A9A08C76
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_sea.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : CE014B4D3846393030314A4D2D423831 [UFS]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000060000 [384.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8F9001JM-B81
CID : CE014B4D3846393030314A4D2D423831
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000003B96000000 [238.34 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : UNLOCKED
Fixing Mi Account Relock...Read Error!Patch Error 0x01!
Operation Finished.
[UltimateMTK2 v1.1]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 56B2791BEA86CF41C464D0A7EDD25386
SoC ID[0] : 6548BA53226F0DF2FCC5C90FA7BBA5C3
SoC ID[1] : 3E2C289EDF668D4D31D11D61A0FD3939
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_hs04.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100445036384D42027161D2343AD9 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x00000000C0000000 [3,00 GB]
Flash ID : DP68MB
CID : 150100445036384D42027161D2343AD9
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240202_18445512.log

 

[Rehox]

FRP Infinix Hot 12 X6817​

USING PL_EXLOIT [INFINIX V1]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM6)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&2ffe9f1e&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 49761195D34C3844F65702FEE69B6686
SoC ID[0] : 3409C5A1AFCD4A1FAA2B6A920B636FA1
SoC ID[1] : 8F98CD240B9A7E7141C730676DE23788
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hDEaP3
CID : 90014A68444561503303108F502D9841
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 12
Build Dt. : Mon Jan 30 13:16:41 CST 2023
Display ID : INFINIX-S-64-230130V1117
Ver. Inc. : 230130V1704
Locale : en-US
Patch : 2022-12-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240202_163424.log

 

[Rehox]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 56B2791BEA86CF41C464D0A7EDD25386
SoC ID[0] : 6548BA53226F0DF2FCC5C90FA7BBA5C3
SoC ID[1] : 3E2C289EDF668D4D31D11D61A0FD3939
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_hs04.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100445036384D42027161D2343AD9 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x00000000C0000000 [3,00 GB]
Flash ID : DP68MB
CID : 150100445036384D42027161D2343AD9
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240202_18445512.log

Hi There is a part that I would miss if you do not ignore, for example in my post the first two lines since the information on the process to be used is more precise, because the tool does not always provide the model

FRP Infinix Hot 12 X6817 ←​

USING PL_EXLOIT [INFINIX V1] ←​

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM6)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&390692d&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : FD431E874935D2F748E37B88F44526D1
SoC ID[0] : E9F5515DCD1C52E9D33681D1578682D7
SoC ID[1] : 92C51E3FC449E1EEE070FA26D22F93A7
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_merlin.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 15010044503644414203A5F19A987739 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DAB
CID : 15010044503644414203A5F19A987739
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 11
Build Dt. : Tue Jun 28 23:41:08 CST 2022
Display ID : RP1A.200720.011
Ver. Inc. : V12.5.6.0.RJOINXM
Locale : en-GB
Mod. Dev. : merlin_in_global
Patch : 2022-06-01
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 2024552_1955223.log

 

[GsmToto]

rand/Model : *Auto* / *Auto Detect*
Operation : Erase Data + FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM2)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&390692d&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : FD431E874935D2F748E37B88F44526D1
SoC ID[0] : E9F5515DCD1C52E9D33681D1578682D7
SoC ID[1] : 92C51E3FC449E1EEE070FA26D22F93A7
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_merlin.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 15010044503644414203A5F19A987739 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DAB
CID : 15010044503644414203A5F19A987739
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 11
Build Dt. : Tue Jun 28 23:41:08 CST 2022
Display ID : RP1A.200720.011
Ver. Inc. : V12.5.6.0.RJOINXM
Locale : en-GB
Mod. Dev. : merlin_in_global
Patch : 2022-06-01
Bootloader : LOCKED
Erasing Userdata...OK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240208_1442371.log

 

[MANISH ROY]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent



UltimateMTK2 v1.1
The Ultimate MediaTek Tool

Please login to view image

What's New:

Updated Infinix/iTel/Tecno V3 (Nov'23) in Preloder Mode
- Supported Chipsets:
- MT6761
- MT6765
- MT6768
- MT6781
- MT6785
- MT6833
- MT6877
- MT6893


Added Storage Health Check on Boot
- It will show PreEOL, LifeTime Estimate A, and LifeTime Estimate B when possible.


Updated Xiaomi Mi Account Relok Fix Function
- Tested on MIUI 14


Added Safe Format (Oppo) Option
- We still recommend using Erase Data to Format
- If device is stuck in recovery, use Fix Recovery only
- Do not do anything except Fix Recovery


Added Erase Data + FRP Option


Updated Fix Recovery Function


Revised Format Functions List


Updated Read Information on devices with Dynamic Partitions and A/B Slots


Disabled "SWITCH HI-SPEED" Option by default
- Using Hi-Speed connection may cause issue with poor quality cable
- If you want to use Hi-Speed connection, please tick "SWITCH HI-SPEED" checkbox


Fixed Minor GUI Issues





Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
- You can test PRELOADER EXPLOIT on any device with DA from Vendor even if that DA does not allow Write or Erase.



Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

DEAR UMT CODER PLZZ ADD NEW MOTOROLA MODEL MTK CPU NEXT UPDATE FIX PLZZ

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Flash Scatter
USING PL_EXLOIT [VIVO V3]
Using Preloader from Firmware
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&3378f16b&0&5#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6781 [1066] Helio G96
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 59FDDAC91ECF6E929625A38FA026671B
SoC ID[0] : DC628223E95E03E85A734BD19EE9D817
SoC ID[1] : 1BDAFCCF749CC7B41D9F52A5210DA059
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
Int. RAM : 0x0000000000060000 [384.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8V9001JM-B81
CID : CE014B4D3856393030314A4D2D423831
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCAC00000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD2150F_EX
And. Ver. : 13
Prod. Ver. : PD2150F_EX_A_8.18.7
Hw. Ver. : PD2150F_EXMA
Build Dt. : Thu Jan 4 19:21:26 CST 2024
Display ID : TP1A.220624.014 release-keys
Ver. Inc. : eng.compil.20240104.192804
Locale : en-US
Patch : 2024-01-01
Bootloader : LOCKED
Writing preloader [preloader_k6781v1_64.bin]...OK
Writing preloader_backup [preloader_k6781v1_64.bin]...OK
Writing recovery [recovery.img]...OK
Writing vbmeta [vbmeta.img]...OK
Writing vbmeta_system [vbmeta_system.img]...OK
Writing vbmeta_vendor [vbmeta_vendor.img]...OK
Writing vbmeta_oem [vbmeta_oem.img]...OK
Writing vbmeta_vgc [vbmeta_vgc.img]...OK
Writing factory [factory.img]...OK
Writing storage [firmware.bin]...OK
Writing metadata [metadata.img]...OK
Writing efuse [efuse.img]...OK
Writing md1img [md1img-verified.img]...OK
Writing spmfw [spmfw-verified.img]...OK
Writing audio_dsp [audio_dsp-verified.img]...OK
Writing pi_img [pi_img-verified.img]...OK
Writing scp1 [scp-verified.img]...OK
Writing scp2 [scp-verified.img]...OK
Writing sspm_1 [sspm-verified.img]...OK
Writing sspm_2 [sspm-verified.img]...OK
Writing gz1 [gz-verified.img]...OK
Writing gz2 [gz-verified.img]...OK
Writing lk [lk-verified.img]...OK
Writing lk2 [lk-verified.img]...OK
Writing boot [boot.img]...OK
Writing logo [logo-verified.bin]...OK
Writing dtbo [dtbo-verified.img]...OK
Writing tee1 [tee-verified.img]...OK
Writing tee2 [tee-verified.img]...OK
Writing super [super.img]...OK
Writing cache [cache.img]...OK
Writing userdata [userdata.img]...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240215_2144629.log

 

[GsmToto]

rand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&390692d&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1511.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 9904FDE258D4491205EEBD4B7B273137
SoC ID[0] : D76F8F870FF33042CFDF0760897E10B8
SoC ID[1] : E01D3F58DBC868006DD21542EAF7A20A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : RP64MB
CID : 150100525036344D420120AFE423462D
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : LIFE TIME USAGE EXCEED
Life. Est.B : LIFE TIME USAGE EXCEED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Mon Mar 6 18:32:38 CST 2023
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20230306.183730
Locale : en-US
Patch : 2022-05-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.1]
Log Saved : 20240217_18334111.log