UFi oppo a7 dead after wipe data ufi

[qweaq]

oppo a7 fully dead after wipe data
no response from phone
no 9008 port
no detect
i already short CLK point but still dead
plz help

 

[pradyumna]

oppo a7 fully dead after wipe data
no response from phone
no 9008 port
no detect
i already short CLK point but still dead
plz help

Full details of UFI log..
After that factory reset...
Post here...

 

[aftab_ansari5287]

oppo a7 fully dead after wipe data
no response from phone
no 9008 port
no detect
i already short CLK point but still dead
plz help

Please provide logs or screen shot for future assistance

 

[qweaq]

Connection status: EHCI:HUB:HUB[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-1803
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA5, serial number: 0x4CC7649C
Manufacturing date: Nov 2018
CID: 90014A48 43473861 34A54CC7 649CB5E2
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
Device version: 0x4305
Firmware version: 0x1
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 264736]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Secure Feature support: 0x55
Partition configuration: 0x70
Boot acknowledge is sent during the boot operation
Reserved
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1901
brand: OPPO, model: CPH1901 (OPPO A7)
build id: OPM1.171019.026, version: 8.1.0 [Oreo] (CPH1901EX_11_A.22)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210306.003935 release-keys
crypto state: encrypted?
eMMC selected: [HYNIX] H9HP52ACPMMDAR-KMM/64GB (BGA254)

Interface: UFI High-Speed
Serial number: 0011-8844-1803
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA5, serial number: 0x4CC7649C
Manufacturing date: Nov 2018
CID: 90014A48 43473861 34A54CC7 649CB5E2
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
Device version: 0x4305
Firmware version: 0x1
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 58.24 GiB(62,537,072,640 bytes)
MasterClear [1]... Done

 

[aftab_ansari5287]

Connection status: EHCI:HUB:HUB[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8844-1803
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA5, serial number: 0x4CC7649C
Manufacturing date: Nov 2018
CID: 90014A48 43473861 34A54CC7 649CB5E2
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
Device version: 0x4305
Firmware version: 0x1
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 264736]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Secure Feature support: 0x55
Partition configuration: 0x70
Boot acknowledge is sent during the boot operation
Reserved
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1901
brand: OPPO, model: CPH1901 (OPPO A7)
build id: OPM1.171019.026, version: 8.1.0 [Oreo] (CPH1901EX_11_A.22)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210306.003935 release-keys
crypto state: encrypted?
eMMC selected: [HYNIX] H9HP52ACPMMDAR-KMM/64GB (BGA254)

Interface: UFI High-Speed
Serial number: 0011-8844-1803
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HCG8a4 (0x484347386134), rev: 0xA5, serial number: 0x4CC7649C
Manufacturing date: Nov 2018
CID: 90014A48 43473861 34A54CC7 649CB5E2
CSD: D0270132 8F5903FF FFFFFFEF 8A400026
Device version: 0x4305
Firmware version: 0x1
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 58.24 GiB(62,537,072,640 bytes)
MasterClear [1]... Done

Your boot partition have changed. 2 easy methods to fix this.​

1- write only ext_csd. (if u not found ext_csd try 2nd method)​

2-​

 

[qweaq]

Your boot partition have changed. 2 easy methods to fix this.​

1- write only ext_csd. (if u not found ext_csd try 2nd method)​

2-​

View attachment 47237

View attachment 47238

thnks bro u saved my money ...phone alive with this 2nd method

 

[aftab_ansari5287]

thnks bro u saved my money ...phone alive with this 2nd method

thanks for feedback.