AUTH info: MTK, version: 1
BROM version[1]: 7.2137.0.0
Scanning BootROM or Preloader port... Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] [VID: 0E8D, PID: 0003]
Connection status: XHCI:HUB3[#5]:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb:usb2ser.sys, version: 3.0.1504.0, date: 1-22-2015
Platform: 0x0766 [MT6765 (Helio P35/G35)], hw sub code: 0x8A00, hw ver: 0xCA00, sw ver: 0x0000
Security config: 0xE5 [SBC, DAA]
Disabling watchdog timer... Done
Bypassing security config... Done
Connecting Bootrom...
Sending Download Agent...
Keep pressig VOL DOWN + VOL UP until the device sucessfully connected.
DA: MTK_AllInOne_DA.bin
hash: 2b29c1cb38594b1ed3b2b6d7d8c5eae0c890c049, size: 17.41 MiB
version: 3.3001.09/05/, start addr: 0x40000800
Platform: MT6765, hw ver: 0xCA00, sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
SRAM size: 232 KiB
DRAM size: 4 GiB
ME_ID: f4213d4eff37eb51388f0f516329b29a
SOC_ID: bdf0822ce10b0522e0254e54461a0e3d0ad3fe1832584096f926239bb9149606
Initialize storage: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x13 (Micron)
Product name: G1J9R8 (0x47314a395238), rev: 0x10, serial number: 0x07A55B26
Manufacturing date: 6月 2020
CID: 13014E47 314A3952 381007A5 5B2667ED
CSD: D04F0132 8F5913FF FFFFFFEF 8A400083
Device version: 0x000B
Firmware version: 0x1
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 9388], key id: 0
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 1.50 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x49
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
platform: MT6765, S01, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6765_19181, name: PDBM00
brand: OPPO, model: PDBM00 (OPPO A8)
build id: PPR1.180610.011, version: 9 [Pie] (PDBM00_11_A.30)
build date: Tue Jan 11 22:09:26 CST 2022, security patch: 2022-01-05
build description: full_oppo6765_19181-user 9 PPR1.180610.011 eng.root.20220111.220514 release-keys
PCBA: 001918140828183310022969
crypto state: encrypted
secure cfg version: 4
lock state: default
Factory reset...
Creating filesystem with parameters:
Size: 452984832
Block size: 4096
Blocks per group: 32768
Inodes per group: 6912
Inode size: 256
Journal blocks: 1728
Label:
Blocks: 110592
Block groups: 4
Reserved block group size: 31
Created filesystem with 13/27648 inodes and 3568/110592 blocks
Writing cache... Failed
Creating filesystem with parameters:
Size: 54413733888
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 13284603
Block groups: 406
Reserved block group size: 1024
Created filesystem with 11/3325952 inodes and 254832/13284603 blocks
Writing userdata... Done
BROM version[1]: 7.2137.0.0
Scanning BootROM or Preloader port... Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] [VID: 0E8D, PID: 0003]
Connection status: XHCI:HUB3[#5]:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb:usb2ser.sys, version: 3.0.1504.0, date: 1-22-2015
Platform: 0x0766 [MT6765 (Helio P35/G35)], hw sub code: 0x8A00, hw ver: 0xCA00, sw ver: 0x0000
Security config: 0xE5 [SBC, DAA]
Disabling watchdog timer... Done
Bypassing security config... Done
Connecting Bootrom...
Sending Download Agent...
Keep pressig VOL DOWN + VOL UP until the device sucessfully connected.
DA: MTK_AllInOne_DA.bin
hash: 2b29c1cb38594b1ed3b2b6d7d8c5eae0c890c049, size: 17.41 MiB
version: 3.3001.09/05/, start addr: 0x40000800
Platform: MT6765, hw ver: 0xCA00, sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
SRAM size: 232 KiB
DRAM size: 4 GiB
ME_ID: f4213d4eff37eb51388f0f516329b29a
SOC_ID: bdf0822ce10b0522e0254e54461a0e3d0ad3fe1832584096f926239bb9149606
Initialize storage: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x13 (Micron)
Product name: G1J9R8 (0x47314a395238), rev: 0x10, serial number: 0x07A55B26
Manufacturing date: 6月 2020
CID: 13014E47 314A3952 381007A5 5B2667ED
CSD: D04F0132 8F5913FF FFFFFFEF 8A400083
Device version: 0x000B
Firmware version: 0x1
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 9388], key id: 0
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 1.50 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x49
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
platform: MT6765, S01, cpu abi: arm64-v8a
manufacturer: OPPO
board: oppo6765_19181, name: PDBM00
brand: OPPO, model: PDBM00 (OPPO A8)
build id: PPR1.180610.011, version: 9 [Pie] (PDBM00_11_A.30)
build date: Tue Jan 11 22:09:26 CST 2022, security patch: 2022-01-05
build description: full_oppo6765_19181-user 9 PPR1.180610.011 eng.root.20220111.220514 release-keys
PCBA: 001918140828183310022969
crypto state: encrypted
secure cfg version: 4
lock state: default
Factory reset...
Creating filesystem with parameters:
Size: 452984832
Block size: 4096
Blocks per group: 32768
Inodes per group: 6912
Inode size: 256
Journal blocks: 1728
Label:
Blocks: 110592
Block groups: 4
Reserved block group size: 31
Created filesystem with 13/27648 inodes and 3568/110592 blocks
Writing cache... Failed
Creating filesystem with parameters:
Size: 54413733888
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label:
Blocks: 13284603
Block groups: 406
Reserved block group size: 1024
Created filesystem with 11/3325952 inodes and 254832/13284603 blocks
Writing userdata... Done