UMT UMTv2/UMTPro UltimateMTK v1.2 - Vivo Demo, Samsung Unbrick and more...

[SPYROS]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.2
The Ultimate MediaTek Tool

What's New:

Added Vivo Demo Reset (New)
- Tested on Vivo T2x 5G and Y28 5G


Added Vivo Demo Reset (Old)
- For devices not supported by New Method


Added Samsung Unbrick and TAR Flashing
- Simple and Easy way to Unbrick Samsung Devices
- NO NEED OF UNBRICK FIRMWARE ANYMORE
- Supports Completely Formatted Flash Chips
- Creation GPT on the fly if it is Erased
- No need to use Odin to flash after Unbrick if used BL/AP/CP/CSC
- Flashing any Single TAR is supported if GPT is intact
- Incase of fully formatted flash chip, you must use BL/AP/CP/CSC
- Use of same or higher BIT Firmware is recommended to fully recover device
- Software will automatically use preloader from BL if device is connected in BROM mode


Added Read Dump
- Simple and Easy Tool to make Full Dump
- Backup BOOT1/BOOT2 and USERAREA
- USERAREA dump is completely customizable
- You can choose either FULL or set own Start/Length for USERAREA
- Auto detect if save location has enough free space to save dump


Added Write Dump
- You can write back dump created by Read Dump function
- Just select CFG file and tick parts of dump you want to write
- Writing DUMP from one device to another is not recommended
- Make sure to backup security partitions before writing DUMP from another device


Fixed "Lost in background" issue on Confirmation Dialog at Startup

Improved Format Functions

Improved Write Flash Function

Minor UI Changes




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

 

[GsmToto]

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM5)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 44D7A06A6322393BCB59FA34666EBDD0
SoC ID[0] : 4B6F6258E173216984A2F289FD3BCFCD
SoC ID[1] : EB25C7CFEEF664BE3D527EDB92AC837A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : MMC256
CID : D62D004D4D433235365116C3A23F6A71
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A40A00000 [233,01 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Sat Sep 16 18:44:22 CST 2023
Display ID : INFINIX-T-64-ARMV82-230916V1361
Ver. Inc. : 230916V2142
Locale : en-US
Patch : 2023-09-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 209223133_15893312.lo

 

[Ayub034936]

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM5)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 44D7A06A6322393BCB59FA34666EBDD0
SoC ID[0] : 4B6F6258E173216984A2F289FD3BCFCD
SoC ID[1] : EB25C7CFEEF664BE3D527EDB92AC837A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Loading Extension...Done
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : MMC256
CID : D62D004D4D433235365116C3A23F6A71
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003A40A00000 [233,01 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 13
Build Dt. : Sat Sep 16 18:44:22 CST 2023
Display ID : INFINIX-T-64-ARMV82-230916V1361
Ver. Inc. : 230916V2142
Locale : en-US
Patch : 2023-09-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 209223133_15893312.lo

2024/03

 

[bellalhussain]

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.2
The Ultimate MediaTek Tool

What's New:

Added Vivo Demo Reset (New)
- Tested on Vivo T2x 5G and Y28 5G


Added Vivo Demo Reset (Old)
- For devices not supported by New Method


Added Samsung Unbrick and TAR Flashing
- Simple and Easy way to Unbrick Samsung Devices
- NO NEED OF UNBRICK FIRMWARE ANYMORE
- Supports Completely Formatted Flash Chips
- Creation GPT on the fly if it is Erased
- No need to use Odin to flash after Unbrick if used BL/AP/CP/CSC
- Flashing any Single TAR is supported if GPT is intact
- Incase of fully formatted flash chip, you must use BL/AP/CP/CSC
- Use of same or higher BIT Firmware is recommended to fully recover device
- Software will automatically use preloader from BL if device is connected in BROM mode


Added Read Dump
- Simple and Easy Tool to make Full Dump
- Backup BOOT1/BOOT2 and USERAREA
- USERAREA dump is completely customizable
- You can choose either FULL or set own Start/Length for USERAREA
- Auto detect if save location has enough free space to save dump


Added Write Dump
- You can write back dump created by Read Dump function
- Just select CFG file and tick parts of dump you want to write
- Writing DUMP from one device to another is not recommended
- Make sure to backup security partitions before writing DUMP from another device


Fixed "Lost in background" issue on Confirmation Dialog at Startup

Improved Format Functions

Improved Write Flash Function

Minor UI Changes




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

UMTv2 / UMT Pro
Innovative and Intelligent


UltimateMTK2 v1.2
The Ultimate MediaTek Tool

Please login to view image

What's New:

Added Vivo Demo Reset (New)
- Tested on Vivo T2x 5G and Y28 5G


Added Vivo Demo Reset (Old)
- For devices not supported by New Method


Added Samsung Unbrick and TAR Flashing
- Simple and Easy way to Unbrick Samsung Devices
- NO NEED OF UNBRICK FIRMWARE ANYMORE
- Supports Completely Formatted Flash Chips
- Creation GPT on the fly if it is Erased
- No need to use Odin to flash after Unbrick if used BL/AP/CP/CSC
- Flashing any Single TAR is supported if GPT is intact
- Incase of fully formatted flash chip, you must use BL/AP/CP/CSC
- Use of same or higher BIT Firmware is recommended to fully recover device
- Software will automatically use preloader from BL if device is connected in BROM mode


Added Read Dump
- Simple and Easy Tool to make Full Dump
- Backup BOOT1/BOOT2 and USERAREA
- USERAREA dump is completely customizable
- You can choose either FULL or set own Start/Length for USERAREA
- Auto detect if save location has enough free space to save dump


Added Write Dump
- You can write back dump created by Read Dump function
- Just select CFG file and tick parts of dump you want to write
- Writing DUMP from one device to another is not recommended
- Make sure to backup security partitions before writing DUMP from another device


Fixed "Lost in background" issue on Confirmation Dialog at Startup

Improved Format Functions

Improved Write Flash Function

Minor UI Changes




Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)




Note : Some features are device/OS specific and may not work on all devices.




WARNING:
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.

ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.




Download using Support Access or Mirrors



Official Website:
Ultimate Multi Tool
UMT Pro


Br,
UMT

need to add except userdata options in read dump

for save storage and long time .

please add this next update

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6761 [0717] Helio A20/P22/A22/A25/G25
Details : 8A00,CA01,0200
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : EACD6EEB71CA56240B6FFEF9F565AD07
SoC ID[0] : 992BF6E5BD7A7A0CF8A0A31929A7A865
SoC ID[1] : 974127CB68A300BC4B5A10DA257112D5
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_kg5_h6125.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 1501005158363341420315D407F888F5 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000039000 [228,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : QX63AB
CID : 1501005158363341420315D407F888F5
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Wed Jan 11 12:13:37 CST 2023
Display ID : TECNO-RGo-32-230111V606
Ver. Inc. : 230111V952
Locale : en-US
Patch : 2023-01-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 27539644_19275311.log

 

[GsmToto]

USING PL_EXLOIT [INFINIX V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 12E459E0DDCD7F34F44980F18F2F7C20
SoC ID[0] : 14A222B3B73C7149769D27E821E89C36
SoC ID[1] : 825DAB4822D83570A6E2AAF34DEBFF59
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : hC9aP3
CID : 90014A684339615033011052BE73B7D3
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : TECNO MOBILE LIMITED
Ven. Model : TECNO KE7
Platform : mt6768
Ven. Date : Wed Jun 30 16:18:08 CST 2021
Ver. Inc. : 210630V371
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 204668832_16743376.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 979D25AA38F410FF1B82D793704EFB5B
SoC ID[0] : 7B3092CF190B741CFCED527B83AF712C
SoC ID[1] : 92F788F745251EE03B322419527261CD
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_p410ae.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : D6010341334134343210F46C27244949 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : A3A442
CID : D6010341334134343210F46C27244949
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001CCF000000 [115,23 GB]
PRE EOL : NORMAL
Life. Est.A : 40%-50% LIFE TIME USED
Life. Est.B : UNDEFINED
Reading Partition Table...OK
Brand : motorola
Manuf. : motorola
Model : moto g22
Device : hawaiip
And. Ver. : 12
Prod. Name : hawaiip_g
Build Dt. : Mon Feb 19 09:47:25 CST 2024
Display ID : STAS32.79-77-28-50-10
Ver. Inc. : 77-28-50-10
Locale : en-US
Patch : 2024-02-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 20859331_098431172.log

 

[GsmToto]

USING PL_EXLOIT [VIVO V2]
Brand/Model : Vivo / *Auto Detect*
Operation : Safe Format+FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM23)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&34e9dd7a&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 7C2DE86C9083339641DA11E352016F6F
SoC ID[0] : 32B2A846BD66F4FA118EAAB2131A2119
SoC ID[1] : D8035C7107DAB87171DA1B95442EA3E6
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DBB
CID : 15010044503644424202D80DCAC129C9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 10%-20% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD2139JF_EX
And. Ver. : 11
Prod. Ver. : PD2139JF_EX_A_11.0.5.2.W20
Hw. Ver. : PD2139JF_EXMA
Build Dt. : Wed Feb 21 10:53:43 CST 2024
Display ID : RP1A.200720.012 release-keys
Ver. Inc. : eng.compil.20240221.105718
Locale : en-US
Patch : 2024-02-01
Bootloader : LOCKED
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 20863355_16955211.log

 

[GsmToto]

USING PL_EXLOIT [VIVO V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM7)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&1e6a4af9&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6877 [0959] Dimensity 900
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 286DC2F356F48C77DEA10DE6F0CCA9AD
SoC ID[0] : 959BF88050B9AD0A3CD75002AEA9EE8X
SoC ID[1] : 9AE3C94BD758D57AE004722805CA979X
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Sending 2nd DA...OK
Running PL_EXPLOIT [2]...Done
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8V9001JM-B81
CID : CE014B4D3856393030314A4D2D423822
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
PRE EOL : NORMAL
Life. Est.A : 20%-30% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Prod. Model : PD2167F_EX
And. Ver. : 13
Prod. Ver. : PD2167F_EX_A_13.1.15.31.W30
Hw. Ver. : PD2167F_EXMA
Build Dt. : Fri Jan 19 16:06:46 CST 2024
Display ID : TP1A.220624.014 release-keys
Ver. Inc. : eng.compil.20240119.161800
Locale : en-US
Patch : 2024-01-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2853575433_18447134.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 3E2AC6510CDB0DA70EC12CF4276C9C7E
SoC ID[0] : 1FBE2737357CF74CF72ADEA6B5B8CF35
SoC ID[1] : F96BA84E3EB430C64FAFFC9C930FDB18
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_water.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 9B0100593250303332006446206C999F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000080000000 [2,00 GB]
Flash ID : Y2P032
CID : 9B0100593250303332006446206C999F
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000747C00000 [29,12 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2577240_1486225.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : IMEI Repair (Oppo Method)
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&39e6a57&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 30EB5CD9F1CCAD9F8825E8D45943E597
SoC ID[0] : 21BD85F2CCC41AA4D9395B422DBE9C81
SoC ID[1] : AAB6869B919200A1A712446B915A814D
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_18511.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A68423861503E03AD01854D76F9 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x00000000C0000000 [3.00 GB]
Flash ID : hB8aP>
CID : 90014A68423861503E03AD01854D76F9
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 80%-90% LIFE TIME USED
Reading Partition Table...OK
Manuf. : OPPO
And. Ver. : 8.1.0
Locale : en-US
Patch : 2021-04-05
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Backup saved as C:\UMTool\UltimateMTK2\Preloader\111.zip
IMEI1 : 86XXXXXXXXXXXX
IMEI2 : 86XXXXXXXXXXXX
Repairing Security...OK
Fixing Network Data...Not Found!
Possibly already patched.
Disabling Signature Check..Failed!/Ignored!
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 25633212_1844532.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 5D7A72DA90531DA198B0BB5D73BD884E
SoC ID[0] : CE0ED8D19BAC064C5DF189FAB56489FX
SoC ID[1] : E9D898D43ECFB54AB1E206CB0CC7BC8X
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_lancelot.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100445036444142032D69CB00571B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : DP6DAB
CID : 150100445036444142032D69CB00571B
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000000E8F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 50%-60% LIFE TIME USED
Life. Est.B : 20%-30% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 12
Build Dt. : Tue Nov 15 11:38:52 CST 2022
Display ID : SP1A.210812.016
Ver. Inc. : V13.0.2.0.SJCMIXM
Locale : en-GB
Mod. Dev. : lancelot_global
Patch : 2022-10-01
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 24356722_1722341.log

 

[GsmToto]

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&237d5c64&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6833 [0989] Dimensity 700 5G k6833
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B949A1B4BC1F97192B989A501962AAA3
SoC ID[0] : 69B00085FC291A2AE101DB72A6F48D34
SoC ID[1] : 1384EDF88EE1DB13F31D85C52F01DEA3
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000100000000 [4,00 GB]
Flash ID : KM8F9001JM-B81
CID : CE014B4D3846393030314A4D2D423836
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000000400000 [4,00 MB]
USERAREA : 0x0000003B96000000 [238,34 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 26734552_1663321.log

 

[GsmToto]

USING PL_EXLOIT [INFINIX V3]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Device Path : \\?\usb#vid_0e8d&pid_2000#5&94b8c27&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : EA68BBE2140A0C1BB84AD18467FE2258
SoC ID[0] : CD6925F6974DFD428A059D74396B6E63
SoC ID[1] : 043B6A6BC310022D9645E11272A1859A
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DP6DBB
CID : 15010044503644424202111CF2172943
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2357411_0115821.log

 

[GsmToto]

Brand/Model : Xiaomi / Redmi 9C NFC
Operation : IMEI Repair (Xiaomi Method-Redmi 9A (dandelion))
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&25797fd1&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 1649B4BC0A2DB0B6D2F7F5F8C9A27428
SoC ID[0] : 6A528A205AD804408FEDCD81942EF847
SoC ID[1] : DECF6056E92B8FA79563A6952ACE0D15
Running Exploit...
Installing LibUsb Filter Driver...OKDone
Preloader : preloader_k62v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 450100444134303634016381022569F5 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DA4064
CID : 450100444134303634016381022569F5
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : Xiaomi
And. Ver. : 11
Build Dt. : Wed Jul 27 21:08:32 CST 2022
Display ID : RP1A.200720.011
Ver. Inc. : V12.5.6.0.RCDMIXM
Locale : en-GB
Mod. Dev. : dandelion_global
Patch : 2022-07-01
Bootloader : UNLOCKED
Reading nvdata..OK
Reading nvram..OK
Backup saved as H:\UMT Read\MTK\Redmi 9A preloaders\preloader_k62v1_64_bsp_variant\25252.zi p
IMEI1 : 358XXXXXXXXXXXX
IMEI2 : 358XXXXXXXXXXXX
Fetching Data...OK
Writing Data...OK
Fixing Cert...OK
Disabling Signature Check..OK
Operation Finished.
[UltimateMTK2 v1.2]

But Now always gives this error checked on all usb ports and also many cables...

Brand/Model : *Auto* / *Auto Detect*
Operation : Restore Backup
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&39e6a57&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Downloading Preloader...Failed!
Please select preloader!
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
WARNING! DA Auth is Enabled! Only Special DA will work!
Using Internal DA!
Sending 1st DA...Failed!
Try to select another Download Agent.
Operation Finished.
[UltimateMTK2 v1.2]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&2108ad5d&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6895 [1172] Dimensity 8100
Details : 8A00,CA00,0000
Dump Preloader is Disabled! Need preloader!
Preloader : preloader_xaga.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
WARNING! DA Auth is Enabled! Only Special DA will work!
DA : MTK_AllInOne_DA.bin
HW ID not found in DA, please select another DA!
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 207433567_0356326.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&1f73d83a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
MEID : 3F66B652D880BE9CB6B264187AD4836B
SoC ID[0] : 4AC299B674079110BA2A5CF7C00D24A6
SoC ID[1] : BC8437E0D49D36C191EC7BCEF3D1AAB3
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_k65v1_64_bsp.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E53304A394B3910003600DF7551 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : S0J9K9
CID : 13014E53304A394B3910003600DF7553
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Brand : OMIX
Manuf. : OMIX
Model : X5
Ven. Model : X5
Device : X5
And. Ver. : 12
Prod. Name : X5
Build Dt. : Tue Sep 12 14:36:14 CST 2023
Display ID : SP1A.210812.016 release-keys
Ver. Inc. : 1694500108
Locale : tr-TR
Patch : 2023-09-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]

 

[GsmToto]

rand/Model : *Auto* / *Auto Detect*
Operation : IMEI Repair (Oppo Method)
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&39e6a57&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : B07628579FF78381886BF42524C50878
SoC ID[0] : C2FBF7F551FBCCDC975B95808CD4827X
SoC ID[1] : 25A57B3CD01097BFFEC87AC7772DF137
Running Exploit...Done
Dump Preloader is Disabled! Need preloader!
Preloader : preloader_oppo6765_19181.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E53304A394B391019C4D69F37D3 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : S0J9K9
CID : 13014E53304A394B391019C4D69F37D7
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001D1F000000 [116.48 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Manuf. : OPPO
And. Ver. : 9
Locale : en-US
Patch : 2021-03-05
Bootloader : UNLOCKED
Reading Data...OK
IMEI1 : 3XXXXXXXXXXX
IMEI2 : 3XXXXXXXXXXX
Repairing Security...OK
Fixing Network Data...OK
Disabling Signature Check..OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 20367711_177544646.log

 

[GsmToto]

USING PL_EXLOIT [VIVO V2]
Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM4)
Device Path : \\?\usb#vid_0e8d&pid_2000#6&3477b93e&0&9#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : C75EA733C481789D62CC7A0A9EE1F464
SoC ID[0] : 2D855468CB66775DF3F6CC70E728EED4
SoC ID[1] : 614538018887E338F7F86D671C07550B
Sending 1st DA..Failed!
Try to select another Download Agent.
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 2028656564_18635533.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Read Info
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&3504fc2d&0&4#{e768c1e7-986a-404d-bbf3-748b5dce914a}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8C47334854AE5D7CD289992E4FAA848F
SoC ID[0] : FB90BE9FC3810B90551F781BA50167D1
SoC ID[1] : 7392FFF4745FB554EA48A0751F3289F2
Running Exploit...Done
Downloading Preloader...Failed!
Please select preloader!
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E47324D323131102BC384332A9F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : G2M211
CID : 13014E47324D323131102BC384332A9F
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 203568921_31367818.log


Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
Waiting for Device...Found
Port : MediaTek USB Port_V1632 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&3504fc2d&0&4#{e768c1e7-986a-404d-bbf3-748b5dce914a}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 8C47334854AE5D7CD289992E4FAA848F
SoC ID[0] : FB90BE9FC3810B90551F781BA50167D1
SoC ID[1] : 7392FFF4745FB554EA48A0751F3289F2
Running Exploit...Done
Downloading Preloader...Failed!
Please select preloader!
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 13014E47324D323131102BC384332A9F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : G2M211
CID : 13014E47324D323131102BC384332A9F
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v1.2]
Log Saved : 203568922_3136788.log