UMT Model : XT1925-13 MOTO G6 DEAD RECORDS DONE UMT

[gsmsoftware2018]

Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Motorola QC
Operation : Flash
Fw Model : ali
Fw Version : ali-user 9 PPS29.55-37-7 445ae release-keysM450_21.29.10.88R
Searching for Device in FastBoot Mode... OK
Reading Phone Information...
Model : XT1925-13
Boot Ver. : MBM-2.1-ali_retail-5839e8d-190329
Baseband : M450_08.14.10.75R ALI_INDIADSDS_CUST
Software : Blur_Version.29.11.26.ali.retail.en.US
IMEI : 351866092440873
CPU : SDM450
RAM : 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=5F
EMMC : 64GB SAMSUNG RH64AB RV=08 PV=05 FV=0000000000000005
Sending Data [partition]... Done
Sending Data [bootloader]... Done
Sending Data [modem]... Done
Sending Data [fsg]... Done
Erasing [modemst1]... Done
Erasing [modemst2]... Done
Sending Data [dsp]... Done
Sending Data [logo]... Done
Sending Data [boot]... Done
Sending Data [recovery]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [system]... Done
Sending Data [vendor]... Done
Sending Data [vendor]... Done
Sending Data [oem]... Done
Erasing [cache]... Done
Erasing [userdata]... Done
Erasing [DDR]... Done
Operation Finished.
Elapsed Time: 04:16
[Module Ver. 5.5.1]

 

[dorejack]

I’ve seen the dead‑record issue on the XT1925‑13 Moto G6 after running the UMT, which usually means the flash didn’t write correctly. Flash the full stock image with fastboot, wipe system and userdata, then reboot and only start the UMT after the device boots clean. For an exact firmware checksum you can check the public Palm Beach FL Services database which many tech‑savvy users find useful. After re‑flashing, the dead records should disappear and the UMT will finish without errors.