UMT [27-04-24] UMTv2/UMTPro QcFire v9.6 - RedMagic 8 Pro, More Samsung Devices...

[SPYROS]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v9.6
The Ultimate Qualcomm Tool



Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass
- Samsung Unbrick / Dead Boot Repair
- Samsung TAR to Unbrick Firmware Creator

Added:

BLU
- Win HD LTE

LG
- V60 ThinQ (LM-V600AM)

Samsung
- Galaxy J6+ (SM-J610G) BIT7
- Galaxy A42 5G (SM-A426U) BIT3
- Galaxy A05s (SM-A057F) BIT2
- Galaxy A23 (SM-A235F) BIT5
- Galaxy A23 5G (SM-A236U) BIT5
- Galaxy A42 5G (SM-A426W) BIT7
- Galaxy A52 5G (SM-A526U) BIT-C
- Galaxy F55 (SM-E556B) BIT1
- Galaxy S20 5G UW (SM-G981V) BIT8
- Galaxy S20 FE 5G (SM-G781B) BIT9
- Galaxy S20 FE 5G (SM-G781V) BIT-C
- Galaxy S22 5G (SM-S901U) U4
- Galaxy S22 Ultra (SM-S908U) BIT4
- Galaxy S22+ 5G (SM-S906U) U4
- Galaxy Z Flip3 5G (SM-F711B) BIT7
- Galaxy Z Fold4 (SM-F936B) BIT5

ZTE
- Nubia Red Magic 8 Pro (NX729J)



Updated Internal Loader Database







CONNECTION METHOD:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED

Telegram

U.M.T (c) Official Support Chat


Br,
UMT

 

[GsmToto]

Device : Samsung Galaxy A23 (SM-A235F) Operation : Reset FRP Checking for existing devices...Not Found Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable. Some phones may need Special Boot Cable or TestPoint for EDL mode. SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button. Found Port Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7 Connecting to phone...OK Waiting for response...OK Init Handshake Sequence...OK Hardware ID : E1801B00 [SM6225] 00002000 OPK_DATA : 9C04D328444AFF080141EBDAC3941A2CF3BC4FF1A6423E0201 F7CE5510B8A3F3 Initializing Protocol...OK Using Auto Loader Selection [1] Preparing Loader...Done Sending Loader [SM6225_005]...Error Please use correct loader and check USB port / cable. Operation Finished. QcFire Ver. 9.6

 

[SRZKS]

Thanks a lot for Nubia Red Magic 8 Pro (NX729J)

 

[GsmToto]

Device: Samsung Galaxy A05s (SM-A057F) BIT2
Operation: Reset FRP
Checking for existing devices...Found
Port: Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info: Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID: E1801B00 [SM6225] 00002000
OPK_DATA: FE7A96F970CD7CE54D0256497B57539B3E3CBD084E89403B54 C5B4506C905ECS
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A057F_BIT2_001.ufl]
Preparing Loader...Done
Sending Loader [SM-A057F_BIT2_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware: SM6225, UFS, 128 GB
LU Count: 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info: In: 262144 [65536], Out: 16384, Sector Size: 4098
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build: A057FXXS2AWL3
Int. Build: SM-A057F_SEA_XXV_QKEY2
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.6

 

[GsmToto]

Device : Samsung Galaxy S20 FE 5G (SM-G781V) BIT-C
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1300C00 [SD8250] 00002000
OPK_DATA : BC50C0E230C234E185A9BFE044A5F3E103B6A0A651DB2C0B15 396543E7E61A3G
Initializing Protocol...OK
Using Pre-Defined Loader [SM-G781V_BIT-C_001.ufl]
Preparing Loader...Done
Sending Loader [SM-G781V_BIT-C_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SD8250, UFS, 128 GB
LU Count : 4 [0x01DC5C00] [0x00000800] [0x00000800] [0x00003C00]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Software : TP1A.220624.014.G781VSQSCHWK1, G781VSQSCHWK1 [Tue Nov 28 21:42:50 KST 2023]
Android Ver. : 13
Patch Level : 2023-12-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.6

 

[xiran]

Excuse me, why i can´t access to my mi account authapp? And why, it give it to me error when i check mi credits?

 

[GsmToto]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1801B00 [SM6225] 0300A407
OPK_DATA : 489DD7DE2DB26F5DBD1CDF921F54B949A93388CEAEE92B0E80 5882C469B20EC6
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6225_004]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6225, UFS, 256 GB
LU Count : 6 [0x03B51800] [0x00000800] [0x00000800] [0x00000800] [0x00040800] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.6

 

[GsmToto]

Device : Huawei Honor 7A (AUM-L29)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 41001500
OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D 15110FD8B116
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_034]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : unknown
Software : System 8.0.0.073(09YF), eng.root.20201023.024501 [Fri Oct 23 02:45:01 CST 2020]
Android Ver. : 8.0.0
Patch Level : 2020-09-01
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.6

 

[GsmToto]

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1601000 [8937] 04001900
OPK_DATA : A7E18521C90DEBF7FCA804FEB98964384CC488EAAF7252A8BD 9722438E73A34V
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_066]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : KonnectONE MH-T6000 [MH-T6000]
Brand : moxee
Prod.Name : MH-T6000
Software : MH-T6000V1.0.0B013, 231109 [Thu Nov 16 15:56:26 CST 2023]
Android Ver. : 11
Patch Level : 2023-12-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.6

 

[GsmToto]

Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM119)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_003]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1727 [msm8953_64]
Brand : vivo
Prod.Name : msm8953_64
Software : OPM1.171019.011 release-keys, eng.compil.20180703.180334 [Tue Jul 3 18:03:34 CST 2018]
Android Ver. : 8.1.0
Patch Level : 2018-06-01
Formatting userdata...FailedPatched OK
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.
QcFire Ver. 9.6

 

[romeosvks]

umt team pls add g990b2 loader in next upade,thanks in advance

 

[GsmToto]

Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1500900 [SM6150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6150]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...Failed

Reading Auth Blob...
Blob
Getting Auth Data...Connecttion to Auth App Failed!
Run Auth App if not running, or restart Auth App!
Storage Initializaton Failed!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 9.5