A107F

[kitkit85]

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QX63MB (0x515836334d42), rev: 0x00, serial number: 0xA5F5E870
Manufacturing date: May 2020
CID: 15010051 5836334D 4200A5F5 E870577E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)

Current partition access:
Access to boot partition 1
Loading file: "\\C:\Users\Kit\Desktop\ODIN\A107F\A107FXXU5BTD2%20(Android%2010%20Q)%20EMMC%20DUMP%20File%20By%20(www.needromarab.com)\EMMC_ROM2_QD63MB_2361984962_00000000_00400000.bin", size: 4 MiB...
Writing boot1 (8192 sectors)... Done in 8.698 s
Current partition access:
Access to boot partition 2
Loading file: "\\C:\Users\Kit\Desktop\ODIN\A107F\A107FXXU5BTD2%20(Android%2010%20Q)%20EMMC%20DUMP%20File%20By%20(www.needromarab.com)\EMMC_ROM3_QD63MB_2361984962_00000000_00400000.bin", size: 4 MiB...
Writing boot2 (8192 sectors)... Done in 8.725 s
Current partition access:
Access to user area
Loading file: "\\C:\Users\Kit\Desktop\ODIN\A107F\A107FXXU5BTD2%20(Android%2010%20Q)%20EMMC%20DUMP%20File%20By%20(www.needromarab.com)\EMMC_ROM1_QD63MB_2361984962_00000000_40000000.bin", size: 1 GiB...
Writing userarea (2097152 sectors)... Failed to write block 0x00510000:65536 (return code: 1, CMD Error: Timeout)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
[32]Failed to Switch (return code: 1, CMD Error: Timeout) !!!

 

[kitkit85]

bump

 

[ifone]

I have dead A107F dead after Odin flash update. try to revive via UFI but seems not supported at the moment?

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-xxxx
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x810D6ADA
Manufacturing date: Feb 2020
CID: 15010051 4436334D 4203810D 6ADA27xx
CSD: D0270132 0F5903FF F6DBFFEF 8E4040xx
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: MT6765, cpu abi: armeabi-v7a
manufacturer: samsung
board: S96116AA1, name: a10sxx
brand: samsung, model: SM-A107F
build model list: SM-A107F
build id: PPR1.180610.011, version: 9 Pie (PPR1.180610.011.A107FXXS5ASL3)
build description: a10sxx-user 9 PPR1.180610.011 A107FXXS5ASL3 release-keys

crypto state: encrypted?
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G

Any advise?

BR,