Hi
To do this, just install version 2.43 because I could not get a positive result on version 2.57
-------------------------------------------------------------------------------------------------------------
1-Turn off the device and connect in off mode without holding any buttons.
2-In the service menu set the Format FS /Reset Settings option to [SMART RESET EXTRA]
------------------------------------------------------------------------------------------------------------------
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.43
Backup files: X:\InfinityBox\CM2MT2\backup\
Backup files: 0 dirs: 0
Build device list...
Scan 4 profiles...
Init environment...
Load IDBase v124493 Ok
Check for updates...
Installed v2.43
Infinity #CM2MT2 v2.57 - [AppTool] feature, [MMC EOL Reset] and more
Required firmware v0160
Telegram Channel: infinitybox
Telegram Chat: @InfinityBoxTalks
Account: Infinity-Box - Account
Reset Mode: Safe (OnDevice-Like) reset by device requirements: UserData + FRP + Account(s)
Operation: Reset Settings/Format FS [ v2.43 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Format: SMART RESET EXTRA
Wait...
WARNING: Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM (Android) (COM113)
MODE [0]: PRELOADER PORT; PORT: 113
Waiting BOOT ACK...
PRELOADER: ACK Ok
BROM: Init...
Init passed
MODE [0]
CHIP: MT6833 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0989
CODE: Palmer
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: 0_base: base_v2216
[3365c4d2] X:\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6833
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
Reset Interface
PTFN: MediaTek USB Port (COM9)
MODE [0]: BOOTROM; PORT: 9
Waiting BOOT ACK...
BROM: Skip ACK verify
BROM: Init...
Init passed
MODE [0]
CHIP: MT6833 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0989
CODE: Palmer
TYPE: MODERN [RAPHAEL]
MEID: 4CF56DD26CABC2B3E65AE2D806324728
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: B9EEBEDE6921D1B92B05475693AF09B5FDBF51F87D290D923439309DF041D40E
SLA: Local Auth
SLA: Starting Auth
SLA: Continue Auth
FF: Looking for EMI
FF: EMI found
SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2216
[3365c4d2] X:\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6833
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC CID: 150100445036444142002C87D4AE4817
VEN: Samsung OEM: 256 ID: 445036444142 [DP6DAB] PRV: 0x00
SNN: 747099310 [0x2C87D4AE]
MM/YY: 4/2021
EMI: Init Ok
EMI: FireFly preloader_s96801aa2.bin with 12 memory type(s)
1. eMMC LP_DDR4X ID: 150100444836444142 Ven: Samsung | Dev: DH6DAB RAM: 4.00 Gb
2. eMMC LP_DDR4X ID: 13014E47314A395238 Ven: Micron | Dev: G1J9R8 RAM: 4.00 Gb
3. eMMC LP_DDR4X ID: 150100445036444142 Ven: Samsung | Dev: DP6DAB RAM: 4.00 Gb
4. eMMC LP_DDR4X ID: 150100445636444142 Ven: Samsung | Dev: DV6DAB RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100335636434142 Ven: Samsung | Dev: 3V6CAB RAM: 6.00 Gb
6. eMMC LP_DDR4X ID: 150100335636434D42 Ven: Samsung | Dev: 3V6CMB RAM: 6.00 Gb
7. eMMC LP_DDR4X ID: 150100445636444D42 Ven: Samsung | Dev: DV6DMB RAM: 4.00 Gb
8. eMMC LP_DDR4X ID: 13014E47314331324C Ven: Micron | Dev: G1C12L RAM: 8.00 Gb
9. eMMC LP_DDR4X ID: 150100444336444D42 Ven: Samsung | Dev: DC6DMB RAM: 4.00 Gb
10. eMMC LP_DDR4X ID: 150100445636444242 Ven: Samsung | Dev: DV6DBB RAM: 4.00 Gb
11. eMMC LP_DDR4X ID: 150100335636434242 Ven: Samsung | Dev: 3V6CBB RAM: 6.00 Gb
12. eMMC LP_DDR4X ID: 13014E473243323135 Ven: Micron | Dev: G2C215 RAM: 8.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed
Load HW info...
SRAM: 0x00070000 [ 448.00 Kb ]
DRAM: 0x100000000 [ 4.00 Gb ]
EMMC CID: 150100445036444142002C87D4AE4817
VEN: Samsung OEM: 256 ID: 445036444142 [DP6DAB] PRV: 0x00
SNN: 747099310 [0x2C87D4AE]
MM/YY: 4/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]
CHIP: MT6833 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0989
CODE: Palmer
TYPE: MODERN [RAPHAEL]
RNID: 6F765293E1E356BB17B18FCC12EF5579
MEID: 4CF56DD26CABC2B3E65AE2D806324728
USB: HIGH-SPEED
Boot done [Raphael]
Analyze PT...
Loaded 0x8000 bytes
PT: 0x64 Items: 54
Select info source...
SmartInfo: Android Ver: 12 UserDataFS: 0x02 [ext4|8+] CacheFS: 0x02 [ext4|8+]
Strategy: 3 [samsung]
Verify device config...
Ok
Loaders Ok
Backup to X:\CM2MT2\backup\MT6833__4CF56DD26CABC2B3E65AE2D806324728\
Items to check: 20
Read [10] NVRAM
Read [6] NVDATA
Read [36] PROINFO
Read [18] LK
Read [24] NVCFG
Read [7] PROTECT1
Read [1] PGPT
Read [25] PERSIST
Read [0] PRELOADER
Read [3] EFS
Read [4] SEC_EFS
Read [35] PERSISTENT
Done 12 files
Compress: X:\CM2MT2\backup\MT6833__4CF56DD26CABC2B3E65AE2D806324728\
Cleanup...
Ok
Verify X:\CM2MT2\backup\MT6833__4CF56DD26CABC2B3E65AE2D806324728.7z
Verified
Method [7]
[1] Process RESET PROTECTION... Ok
[2] Process USERDATA... Ok
[3] Process CACHE... Ok
[4] Verified
[5] Verified
[6] Process USERDATA... Ok
[7] Verified
Method [7]
[1] Process...
[2] Verified
Method [7]
Method [7]
Format Vendor Extra Ok
Method [a]
Knox Guard [KG]: Update to Disabled
Format Ok: Knox Guard [KG] reset
Done: 00:10:32
Reconnect Power/Cable now
--------------------------------------------------------------------------------------
2-Once done , the phone will go to recovery and the format option will appear , The lock is removed after formatting.
To do this, just install version 2.43 because I could not get a positive result on version 2.57
-------------------------------------------------------------------------------------------------------------
1-Turn off the device and connect in off mode without holding any buttons.
2-In the service menu set the Format FS /Reset Settings option to [SMART RESET EXTRA]
------------------------------------------------------------------------------------------------------------------
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.43
Backup files: X:\InfinityBox\CM2MT2\backup\
Backup files: 0 dirs: 0
Build device list...
Scan 4 profiles...
Init environment...
Load IDBase v124493 Ok
Check for updates...
Installed v2.43
Infinity #CM2MT2 v2.57 - [AppTool] feature, [MMC EOL Reset] and more
Required firmware v0160
Telegram Channel: infinitybox
Telegram Chat: @InfinityBoxTalks
Account: Infinity-Box - Account
Reset Mode: Safe (OnDevice-Like) reset by device requirements: UserData + FRP + Account(s)
Operation: Reset Settings/Format FS [ v2.43 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Format: SMART RESET EXTRA
Wait...
WARNING: Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue? Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM (Android) (COM113)
MODE [0]: PRELOADER PORT; PORT: 113
Waiting BOOT ACK...
PRELOADER: ACK Ok
BROM: Init...
Init passed
MODE [0]
CHIP: MT6833 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0989
CODE: Palmer
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
AGENT: AUTO: 0_base: base_v2216
[3365c4d2] X:\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6833
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
Reset Interface
PTFN: MediaTek USB Port (COM9)
MODE [0]: BOOTROM; PORT: 9
Waiting BOOT ACK...
BROM: Skip ACK verify
BROM: Init...
Init passed
MODE [0]
CHIP: MT6833 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0989
CODE: Palmer
TYPE: MODERN [RAPHAEL]
MEID: 4CF56DD26CABC2B3E65AE2D806324728
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: B9EEBEDE6921D1B92B05475693AF09B5FDBF51F87D290D923439309DF041D40E
SLA: Local Auth
SLA: Starting Auth
SLA: Continue Auth
FF: Looking for EMI
FF: EMI found
SLA: Auth Passed; SEC: 0x000000E0
AGENT: AUTO: 0_base: base_v2216
[3365c4d2] X:\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6833
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC CID: 150100445036444142002C87D4AE4817
VEN: Samsung OEM: 256 ID: 445036444142 [DP6DAB] PRV: 0x00
SNN: 747099310 [0x2C87D4AE]
MM/YY: 4/2021
EMI: Init Ok
EMI: FireFly preloader_s96801aa2.bin with 12 memory type(s)
1. eMMC LP_DDR4X ID: 150100444836444142 Ven: Samsung | Dev: DH6DAB RAM: 4.00 Gb
2. eMMC LP_DDR4X ID: 13014E47314A395238 Ven: Micron | Dev: G1J9R8 RAM: 4.00 Gb
3. eMMC LP_DDR4X ID: 150100445036444142 Ven: Samsung | Dev: DP6DAB RAM: 4.00 Gb
4. eMMC LP_DDR4X ID: 150100445636444142 Ven: Samsung | Dev: DV6DAB RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100335636434142 Ven: Samsung | Dev: 3V6CAB RAM: 6.00 Gb
6. eMMC LP_DDR4X ID: 150100335636434D42 Ven: Samsung | Dev: 3V6CMB RAM: 6.00 Gb
7. eMMC LP_DDR4X ID: 150100445636444D42 Ven: Samsung | Dev: DV6DMB RAM: 4.00 Gb
8. eMMC LP_DDR4X ID: 13014E47314331324C Ven: Micron | Dev: G1C12L RAM: 8.00 Gb
9. eMMC LP_DDR4X ID: 150100444336444D42 Ven: Samsung | Dev: DC6DMB RAM: 4.00 Gb
10. eMMC LP_DDR4X ID: 150100445636444242 Ven: Samsung | Dev: DV6DBB RAM: 4.00 Gb
11. eMMC LP_DDR4X ID: 150100335636434242 Ven: Samsung | Dev: 3V6CBB RAM: 6.00 Gb
12. eMMC LP_DDR4X ID: 13014E473243323135 Ven: Micron | Dev: G2C215 RAM: 8.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed
Load HW info...
SRAM: 0x00070000 [ 448.00 Kb ]
DRAM: 0x100000000 [ 4.00 Gb ]
EMMC CID: 150100445036444142002C87D4AE4817
VEN: Samsung OEM: 256 ID: 445036444142 [DP6DAB] PRV: 0x00
SNN: 747099310 [0x2C87D4AE]
MM/YY: 4/2021
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0xE8F800000 [ 58.24 Gb ]
CHIP: MT6833 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0989
CODE: Palmer
TYPE: MODERN [RAPHAEL]
RNID: 6F765293E1E356BB17B18FCC12EF5579
MEID: 4CF56DD26CABC2B3E65AE2D806324728
USB: HIGH-SPEED
Boot done [Raphael]
Analyze PT...
Loaded 0x8000 bytes
PT: 0x64 Items: 54
Select info source...
SmartInfo: Android Ver: 12 UserDataFS: 0x02 [ext4|8+] CacheFS: 0x02 [ext4|8+]
Strategy: 3 [samsung]
Verify device config...
Ok
Loaders Ok
Backup to X:\CM2MT2\backup\MT6833__4CF56DD26CABC2B3E65AE2D806324728\
Items to check: 20
Read [10] NVRAM
Read [6] NVDATA
Read [36] PROINFO
Read [18] LK
Read [24] NVCFG
Read [7] PROTECT1
Read [1] PGPT
Read [25] PERSIST
Read [0] PRELOADER
Read [3] EFS
Read [4] SEC_EFS
Read [35] PERSISTENT
Done 12 files
Compress: X:\CM2MT2\backup\MT6833__4CF56DD26CABC2B3E65AE2D806324728\
Cleanup...
Ok
Verify X:\CM2MT2\backup\MT6833__4CF56DD26CABC2B3E65AE2D806324728.7z
Verified
Method [7]
[1] Process RESET PROTECTION... Ok
[2] Process USERDATA... Ok
[3] Process CACHE... Ok
[4] Verified
[5] Verified
[6] Process USERDATA... Ok
[7] Verified
Method [7]
[1] Process...
[2] Verified
Method [7]
Method [7]
Format Vendor Extra Ok
Method [a]
Knox Guard [KG]: Update to Disabled
Format Ok: Knox Guard [KG] reset
Done: 00:10:32
Reconnect Power/Cable now
--------------------------------------------------------------------------------------
2-Once done , the phone will go to recovery and the format option will appear , The lock is removed after formatting.
